Factory-direct bridal jewelry, shipped to the USA

Engagement Rings

Pear Shaped Engagement Rings: Setting Tips That Sell

2 October 2026 · 5 min

A buyer in San Diego called us last quarter with a customer who returned a pear shaped ring because the tip had chipped within a month. The setting had a flat prong on the point instead of a V-prong. We replaced the ring and re-quoted her entire pear line with V-prong tip protection. Return rate on that SKU dropped from 18% to 2%. Pear shaped rings are a high-margin bridal shape, but only if the setting protects the tip.

Step 01

Why pear shape needs a specific setting

A pear is a hybrid of round and marquise: a rounded end and a single point. The point is a corner with a 90-degree angle, which is the most chip-prone part of any faceted stone. The moissanite gemological entry notes a Mohs hardness of 9.25, but hardness does not prevent chipping at sharp corners under side impact. The fix is a V-prong that cups the tip from both sides, so the point never touches the setting. We ship all pear shapes with a V-prong at the tip and three standard prongs along the rounded end.

For wholesale buyers, the V-prong is not optional. Stock pear rings only in settings with V-tip protection. Cross-sell into our piece on pear cut finger-flattering proportions and marquise elongation tricks for elongated shapes.

Step 02

Length-to-width ratio that sells

Pear shapes come in ratios from 1.3:1 (chunky) to 1.6:1 (slender). The 1.45:1 ratio outsells both extremes in our line. Below 1.3:1 the stone reads like a round with a tail; above 1.6:1 the tip looks thin and fragile. The GIA 4Cs treats proportion as a cut-grade factor, and the 1.45:1 ratio is the proportion that photographs longest on the finger without looking off-balance. Stock 8x5mm (1.0ct equivalent), 9x6mm (1.5ct) and 10x7mm (2.0ct). The 9x6 is the volume mover.

Step 03

Point up or point down

Most brides wear the point toward the fingertip (point up). That orientation elongates the finger and is the standard in our shipments. A minority wear the point toward the knuckle (point down), which reads more vintage. We do not sell point-down as a SKU because it cannot be resized to fit the other hand without re-tipping the prongs. If a customer asks for point-down, quote it as a custom order with a 4-week lead time. Our guide on heart cut symmetry tips covers another asymmetric shape.

Step 04

Halo and band pairing

A pear shape pairs well with a micro-pave halo that follows the outline, but avoid a heavy halo that adds visual weight to the rounded end and makes the tip look thinner. The wedding band should be curved or notched to match the pear outline; a straight band leaves a visible gap at the tip. Our piece on curved bands for irregular settings covers the fit. For brides who want a low-profile stack, pair the pear with a 1.6mm curved band so the two sit flush. The IGI grading lab notes that pear shapes with good symmetry grade higher, which is a merchandising talking point for retail.

Step 05

Marketing angles that sell pear shapes

Pear sells on two emotional triggers: elongation and uniqueness. Brides who want their finger to look longer are comparing pear against oval; brides who want a ring that does not look like everyone else's are comparing pear against round. Use on-hand photography that shows the pear next to a round of the same carat, so the elongation is visible. Avoid product shots on white background only; pear looks different on skin. Spec the 9x6mm as the hero SKU for social media, because it photographs the longest and gets the most saves. We see pear posts outperform oval posts by about 20% on saves and shares.

Step 06

Common mistakes to avoid when stocking pears

The first mistake is ordering the wrong ratio. A 1.2:1 pear looks stubby and reads like a round with a tail; brides return it. The second mistake is skimping on the V-prong to save cost. A flat prong on the tip leads to chipped stones and warranty claims. The third mistake is pairing the pear with a straight band that leaves a visible gap. Always spec a curved or notched band when you sell a pear, and price the band into the set. The fourth mistake is ordering only one size. Stock 9x6mm as the volume, but keep one 8x5 and one 10x7 on hand for petite and large-finger brides. Following these four rules cut our pear returns from 18% to 2%.

Does a pear shaped ring look longer than an oval?

Yes. The point adds visual length that an oval does not have. A 9x6mm pear reads about 2.0ct equivalent on the finger, while a 9x6mm oval reads about 1.5ct.

Which way should the point face?

Toward the fingertip. It elongates the finger and is the orientation most brides expect. Point-down is a custom order.

Is a pear shape durable enough for daily wear?

With a V-prong at the tip, yes. Without one, the tip chips. Spec V-prong on every pear SKU.

What wedding band pairs with a pear?

A curved or notched band that follows the outline. A straight band leaves a gap at the tip.

Wholesale CTA: HOLYCOME ships pear shaped moissanite engagement rings in 8x5, 9x6 and 10x7mm with V-prong tip protection across 14k gold and platinum. MOQ is 6 pieces per SKU. Request the current pear setting spec sheet from your account manager today.

Step 07

Frequently Asked Questions

What ring sizes can you supply in bulk?

US sizes 5–12 including half sizes. Send a size breakdown with your order and we cast to that curve; comfort-fit inner bands reduce resize requests.

Can I order a mixed size run instead of one size?

Yes. Mixed runs are standard for wholesale: specify quantity per size and we pack and label by size at no extra labor cost.

What is the MOQ for custom ring designs?

50 pieces per design for existing molds; 100–300 pieces when a new mold or CAD model is required.

How should I price rings for retail margin?

Most partners use a 3–4x markup on FOB cost for sterling and 2.5–3x for moissanite solos, which keeps landed cost under 30% of retail.

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .