Engagement Rings
Heart Cut Engagement Rings: Symmetry Tips for Wholesale Sourcing
Heart cuts are the most emotional shaped stone and the most unforgiving to cut. A round brilliant can be 5% off and still look fine. A heart cut that is 5% off reads as lopsided on a ring, and the customer notices immediately. For a wholesale buyer, sourcing (FTC jewelry industry guides) heart-shaped moissanite means running a tighter QC check than on any other silhouette.
The three symmetry points that matter
A heart cut has three visual anchors: the cleat (the notch at top center), the two wings (the rounded upper lobes), and the pointed culette at the bottom. For the stone to read as a heart, all three must line up on the vertical axis.
The cleat should sit dead-center on the long axis. If it tilts even 2 degrees, the stone looks like a sideways heart. The two wings should match in width within 0.2mm. A wing 0.3mm wider than its twin reads as droopy. The culette point should sit on the same vertical line as the cleat; a wandering culette is the most common QC failure.
The IGI shaped-grading documentation outlines how cut graders treat symmetry on fancy shapes, and the same tolerances apply to moissanite.
Cleat depth and L/W ratio
A heart cut cleat depth determines how clearly it reads as a heart. A shallow cleat (under 5% of width) reads as a fat oval. A deep cleat (over 10%) reads as cartoonish. The sweet spot is 6% to 8% of width. A 7mm wide heart should have a cleat notch roughly 0.4mm to 0.6mm deep.
The length-to-width ratio for a heart is 0.85 to 1.0 (slightly wider than long). A heart longer than wide reads as an upside-down pear. Stock hearts at 0.90 to 0.95 L/W.
Setting a heart cut without breaking it
The pointed culette is the weakest point. A prong should sit directly on the point with a V-tip to cradle it. Bezel settings protect the point but can make the heart look like a cabochon.
Half-bezel on the wings plus a V-prong on the point is preferred. For other shapes see pear cut proportions.
The Wikipedia moissanite entry is a reference for FAQ sheets.
QC checklist on opening a parcel
Check four things under 10x loupe: cleat centered, wings within 0.2mm, culette on axis, girdle not paper-thin at the point. Stones that fail go back.
Frequently asked questions
What makes a heart cut look lopsided?
A cleat off-center, wings differing by more than 0.2mm, or a culette wandering from the vertical axis.
What L/W ratio is best for a heart cut?
0.90 to 0.95, slightly wider than long. Hearts longer than wide read as upside-down pears.
What setting protects the heart point?
A V-prong on the culette point plus half-bezel on the wings. Avoid full bezel, which rounds the silhouette.
Wholesale note: HOLYCOME sources heart-cut moissanite in 5mm to 9mm, every stone QC-checked for cleat, wing and culette symmetry. Pair with stackable bands, cross-sell engagement rings, and order loose moissanite for custom work. Request a heart-cut QC sample.
Why heart cuts sell in specific seasons
Heart-cut engagement rings see a 40% to 60% spike in enquiries between January and March, driven by Valentine Day proposals and spring engagement season. Stock your heart-cut sample tray in Q4 so it is on display when the enquiries hit. The second spike is in November for holiday proposals. For wholesale buyers, this means heart cuts should be a seasonal SKU, not a permanent core range, unless your market skews romantic.
Why heart cuts sell in specific seasons
Heart-cut engagement rings see a 40% to 60% spike in enquiries between January and March, driven by Valentine Day proposals and spring engagement season. Stock your heart-cut sample tray in Q4 so it is on display when the enquiries hit. The second spike is in November for holiday proposals. For wholesale buyers, this means heart cuts should be a seasonal SKU, not a permanent core range, unless your market skews romantic. For other shaped stones see pear cut proportions.
The most ordered heart size across our wholesale range is a 7mm to 8mm stone, roughly 1.2ct to 1.5ct equivalent. Smaller hearts (5mm to 6mm) read as delicate and suit petite fingers. Larger hearts (9mm and up) read as statement and work best on size 7 and up. QC every heart for wing symmetry before shipping.
Avoid heart cuts with a visible off-center cleat. The cleat should sit exactly at the 12 o clock position on the girdle. If the cleat is off by more than 1mm, the heart reads as lopsided and will be returned. QC every heart cut stone under magnification before shipping.
Price heart cut moissanite at a 15% to 20% premium over round because the yield on heart cuts is lower. Rough stone that can cut a heart has to be specially oriented, which increases waste. This premium is accepted by customers who want the romantic symbolism.
Gemstone grading terminology used here follows the Gemological Institute of America’s gem encyclopedia.
Frequently Asked Questions
What ring sizes can you supply in bulk?
US 5 to 12 including half sizes. Send a size curve with the order and we cast to it.
Can I order a mixed size run?
Yes. Mixed runs are standard; specify quantity per size and we pack and label by size.
What is the MOQ for custom ring designs?
50 pieces per design on existing molds; 100 to 300 pieces when a new mold or CAD model is needed.
How should I price rings for retail margin?
Most partners use a 3 to 4x markup on FOB cost for sterling and 2.5 to 3x for moissanite solos.
Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.
Ask the workshop



