Engagement Rings
Pear Cut Engagement Rings: Finger-Flattering Proportions Buyers Should Stock
A retail buyer walked into our Shenzhen showroom last spring holding three pear-shaped moissanite rings side by side. The 9x6mm stone looked like a teardrop on her size 7 model hand. The 10x6.5mm stone looked balanced. The 11x7mm stone looked stretched and slightly off. All three were the same grade, same color, same cut grade on paper. The difference was geometry, and that geometry is what separates a pear cut that sells from one that gets returned.
Pear (or teardrop) cuts combine the silhouette of a round brilliant with the elongation of a marquise. That shape is the reason they photograph well and the reason they can photograph badly. For a wholesale buyer, stocking the right proportions means matching stone dimensions to the finger shapes your customers actually wear. This guide walks through the numbers.
What finger-flattering actually means
A flattering pear cut does two jobs at once: it lengthens the finger visually, and it does not make the stone look too big or too small for the hand. The length-to-width (L/W) ratio is the master number. A pear that is too round (ratio under 1.45) reads like a fat oval and loses the teardrop identity. A pear that is too narrow (ratio over 1.75) reads like a marquise with a rounded end and looks skinnier than its carat weight suggests.
Most GIA-trained cut graders describe a well-proportioned pear as sitting between 1.45 and 1.75 L/W, with the sweet spot around 1.50 to 1.60 for everyday wear. You can read more about how shape and proportion interact in the GIA 4Cs educational pages. For moissanite, which is cut to tighter commercial tolerances than mined diamond, the same ranges apply because human eyes judge silhouette the same way regardless of the mineral.
Match the ratio to the finger
Narrow fingers (size 4 to 5.5) benefit from a slightly fuller pear, ratio around 1.45 to 1.55.
Match the ratio to the finger
Narrow fingers (size 4 to 5.5) benefit from a slightly fuller pear, ratio around 1.45 to 1.55, so the stone does not look pinched. Wide fingers (size 7.5 and up) can carry a longer ratio, 1.60 to 1.70, because the extra length reads as elegant against a broader knuckle. Short, broad fingers respond best to a ratio near 1.50 worn north-south on the finger, which is the traditional point-up orientation.
Match the ratio to the finger
Narrow fingers (size 4 to 5.5) benefit from a slightly fuller pear, ratio around 1.45 to 1.55, so the stone does not look pinched. Wide fingers (size 7.5 and up) can carry a longer ratio, 1.60 to 1.70, because the extra length reads as elegant against a broader knuckle. Short, broad fingers respond best to a ratio near 1.50 worn north-south on the finger, which is the traditional point-up orientation.
The point direction is the second lever. Point-up (toward the knuckle) elongates the finger. Point-down (toward the fingertip) shortens it visually and suits a long, slender hand that wants a chunkier look. Most brides default to point-up because it reads more like a classic engagement ring, but a 2024 trend report from bridal retailers we work with noted that point-down pears grew roughly 18% in enquiries over the previous 12 months as an alternative aesthetic. Stock both orientations in your sample tray.
Match the ratio to the finger
Narrow fingers (size 4 to 5.5) benefit from a slightly fuller pear, ratio around 1.45 to 1.55, so the stone does not look pinched. Wide fingers (size 7.5 and up) can carry a longer ratio, 1.60 to 1.70, because the extra length reads as elegant against a broader knuckle. Short, broad fingers respond best to a ratio near 1.50 worn north-south on the finger, which is the traditional point-up orientation.
The point direction is the second lever. Point-up (toward the knuckle) elongates the finger. Point-down (toward the fingertip) shortens it visually and suits a long, slender hand that wants a chunkier look. Most brides default to point-up because it reads more like a classic engagement ring, but a 2024 trend report from bridal retailers we work with noted that point-down pears grew roughly 18% in enquiries over the previous 12 months as an alternative aesthetic. Stock both orientations in your sample tray.
Setting choices that carry the pear
A pear cut has a sharp point on one end and a rounded shoulder on the other. The sharp point is the most vulnerable spot in the stone. A four-prong setting should put one prong directly on the point and one on each shoulder, with the fourth prong bridging the culette. A three-prong bypass setting can look modern but concentrates force on the point and raises chipping risk, especially in moissanite which, while hard at 9.25 on the Mohs scale, is more brittle than diamond. See the Wikipedia entry on moissanite for hardness and thermal properties if you need a reference for customer-facing FAQ sheets.
Bezel-set pears protect the point but eat roughly 8% to 12% of visible width. A half-bezel on the rounded shoulder plus a single prong on the point is the compromise most of our wholesale clients prefer. Halo settings amplify the apparent size by 15% to 20% on the finger but can crowd a narrow hand; reserve halos for stones under 1.5ct equivalent where the center alone looks small.
Wholesale QC checks for pear moissanite
When you open a parcel, check four things under 10x loupe: (1) the point is centered on the long axis, not tilted; (2) both wings (the curved shoulders) match in width within 0.2mm; (3) the culette is not a raised nick; (4) the girdle is not paper-thin at the point, which causes edge chipping. Stones that fail any of these four checks should be returned, because a lopsided pear is the single most common reason for a jewelry-store return on shaped stones.
Frequently asked questions
What length-to-width ratio is most flattering?
For most customers, 1.50 to 1.60 L/W is the safest stock. It reads as a clear teardrop on size 5 to size 7.5 fingers without looking stretched. Go to 1.45 to 1.55 for narrow hands and 1.60 to 1.70 for wider hands.
Which way should the point face on the finger?
Point-up (toward the knuckle) is the classic orientation and lengthens the finger. Point-down reads as a fashion choice and suits long, slim hands. Offer both in your sample tray and let the customer choose.
Does a pear cut hide inclusions better than an oval?
Yes. The broad rounded end and the pavilion depth around the point conceal small feather inclusions better than an oval of the same carat. For moissanite, which is nearly eye-clean in most commercial grades, this matters less, but it is still a useful sales talking point.
What finger sizes should I stock?
Stock sample rings in size 6 and size 7 as your demo fingers. Roughly 70% of retail brides fall between size 5 and size 7.5, and those two sample sizes cover the visible range your customers will compare.
Wholesale note: HOLYCOME supplies pear-cut moissanite loose stones and pre-set rings in 7x5mm through 12x8mm, with full IGI/GIA-adjacent grading packets and private-label packaging. If your boutique or e-commerce brand wants a pear cut that photographs as elegant as it wears, read our bride-facing moissanite guide, then request a sample tray. For paired bands, see matching wedding bands for engagement rings, and compare silhouettes against oval vs round moissanite cuts. We also ship loose moissanite for your own workshop and tennis bracelet SKUs that pair with a bridal collection.
Frequently Asked Questions
What ring sizes can you supply in bulk?
US 5 to 12 including half sizes. Send a size curve with the order and we cast to it.
Can I order a mixed size run?
Yes. Mixed runs are standard; specify quantity per size and we pack and label by size.
What is the MOQ for custom ring designs?
50 pieces per design on existing molds; 100 to 300 pieces when a new mold or CAD model is needed.
How should I price rings for retail margin?
Most partners use a 3 to 4x markup on FOB cost for sterling and 2.5 to 3x for moissanite solos.
Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.
Ask the workshop



