Factory-direct bridal jewelry, shipped to the USA

Necklaces & Pendants

Necklaces & Pendants Distributor Tier: How the Second Order Becomes Cheaper

9 November 2026 · 11 min

Step 01

How the Second Order Becomes Cheaper in the Distributor Tier Program

A US buyer of necklaces and Pendants came to us after 800 necklaces and Pendants from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: clasp fatigue had drifted far enough that the buyer's own bench could not correct it without recutting, shipped as bulk carton, 50 per bag and certified SGS batch report.

At 800 pieces the buyer was not buying a defect, they were buying a document. The Distributor Tier order carried a photo and a price, and clasp fatigue had nowhere to live, which the Distributor Tier file records at USD 24-171 in bulk carton, 50 per bag.

Necklaces & Pendants wholesale piece from the HOLYCOME line in Wuzhou

Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, on a 800-piece Distributor Tier order at USD 24-171.

Step 02

Cost Split on a Distributor Tier Piece at USD 24-171

At USD 24-171 per piece for necklaces and Pendants, the stone is roughly a quarter and labor is where two quotes for the same drawing diverge.

Cost lineShareWhat moves it
Base metal or alloy for necklaces and Pendants32%Alloy choice and casting yield
Stone or melee for necklaces and Pendants23%Sieve range and lot batching
Setting and finishing labor for necklaces and Pendants21%Jig design and bench minutes
Plating, polish and QC for necklaces and Pendants14%Per-tray versus per-piece checks
Packaging for necklaces and Pendants10%bulk carton, 50 per bag

The saving in the cheapest necklaces and Pendants quote hides in the plating line and the stone grade. Both appear in season two, not on arrival, which is how the Distributor Tier account reads it at USD 24-171.

Step 03

Four Spec Lines a Distributor Tier Buyer Checks

Most quotes describe the necklaces and Pendant and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard, priced at USD 24-171 for the 800-piece Distributor Tier run.

Necklaces & Pendants setting and finish detail on a HOLYCOME factory sample
Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection, and the Distributor Tier quote for it sits at USD 24-171.

Step 04

Distributor Pricing Tiers on necklaces and Pendants

A distributor does not buy a necklaces and Pendant, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, which is how the Distributor Tier account reads it at USD 24-171.

What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 24-171.

Turn is the number the distributor manages. At USD 24-171 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of necklaces and Pendants move in 800-piece lots rather than in the 50-piece sample quantity.

Step 05

Three Failures That Reach the Distributor Tier Bench

clasp fatigue

A spring clasp rated by catalog rather than by pull test opens after 40-60 wear cycles. The rating belongs on the spec sheet, not on the website, and at USD 24-171 for 800 pieces that is the number the buyer signs.

Our countermeasure is a gauge and a written limit. It adds about 16 seconds per piece and removes the defect from the run rather than from the carton, the figure being USD 24-171 for a 800-piece run.

link stretch

Chain stretch starts at the link join where the wire was drawn thin to save metal. Measuring wire diameter at both ends of a run catches it before shipping, and the Distributor Tier quote for it sits at USD 24-171.

In a 800-piece run this typically shows on 14 of pieces. Catching it means measuring clasp pull strength at the tray level, not inspecting the finished carton, quoted at USD 24-171 per piece in bulk carton, 50 per bag.

pendant bail shadow

A bail plated in a separate barrel than the chain shows a different white tone under store light. Plating a set in one barrel is the fix, which is how the Distributor Tier account reads it at USD 24-171.

The commercial effect is clasp replacement plus a goodwill credit, typically USD 7-12 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is USD 24-171 on the Distributor Tier schedule.

Step 06

Terms Behind a Distributor Tier Order

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, on a 800-piece Distributor Tier order at USD 24-171.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 24-171 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, shipped as bulk carton, 50 per bag and certified SGS batch report.

Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of clasp pull strength for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, shipped as bulk carton, 50 per bag and certified SGS batch report.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and at USD 24-171 for 800 pieces that is the number the buyer signs.

Step 07

What the Quote Actually Covers

Buyers ask it in the first call about necklaces and Pendants and rarely get a number they can put in a spreadsheet, and the Distributor Tier quote for it sits at USD 24-171.

One practical note on timing for necklaces and Pendants: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, which the Distributor Tier file records at USD 24-171 in bulk carton, 50 per bag.

We date the necklaces and Pendants proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, priced at USD 24-171 for the 800-piece Distributor Tier run.

Step 08

MOQ, Mixed Designs and the Real First Order

The answer for necklaces and Pendants depends on four variables, and three of them are under the buyer's control, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 24-171.

In US wholesale terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For necklaces and Pendants, we publish the figure per SKU and hold it for the order window rather than for the calendar year, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.

Practically, it shows up in three places for necklaces and Pendants: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, priced at USD 24-171 for the 800-piece Distributor Tier run.

Step 09

The Calendar Behind a Distributor Tier Run

For bulk carton, 50 per bag at 800 pieces, the sequence is fixed and the dates are the only thing that moves, which is USD 24-171 on the Distributor Tier schedule.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

MOQ stays at 50 pieces per design on necklaces and Pendants, low enough to test a shelf and high enough to keep the gauge check independent, quoted at USD 24-171 per piece in bulk carton, 50 per bag.

Step 10

Getting bulk carton, 50 per bag to US wholesale

Export runs through Guangzhou or Shenzhen. For Distributor Tier orders the SGS batch report file travels with the shipping documents, not separately, and at USD 24-171 for 800 pieces that is the number the buyer signs.

The clearance term matters more than the rate at 800 pieces. A duty surprise can cost more than the whole freight line, which is USD 24-171 on the Distributor Tier schedule.

The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against clasp pull strength and chain length within +/-3 mm, shipped as bulk carton, 50 per bag and certified SGS batch report, which the Distributor Tier file records at USD 24-171 in bulk carton, 50 per bag.

Step 11

The First Distributor Tier Order

The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods, and at USD 24-171 for 800 pieces that is the number the buyer signs.

The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand, which is USD 24-171 on the Distributor Tier schedule.

Step 12

Frequently Asked Questions

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white necklaces and Pendants, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is USD 24-171 on the Distributor Tier schedule.

How is necklaces and Pendants packed for bulk carton, 50 per bag?

Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, the figure being USD 24-171 for a 800-piece run.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

How long does a reorder of the same necklaces and Pendant take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, shipped as bulk carton, 50 per bag and certified SGS batch report.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white necklaces and Pendants, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is USD 24-171 on the Distributor Tier schedule.

Step 13

Next Step

If the USD 24-171 band fits your shelf, send the drawing and we will quote the 800-piece Distributor Tier run inside one business day.

HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across necklaces and Pendants and adjacent categories. service@holycome.com or WhatsApp +86 133 7744 7107, priced at USD 24-171 for the 800-piece Distributor Tier run.

Related reading: Necklaces & Pendants Trade Show Sample: The Reject Tray Policy That Decides a Partner - HOLYCOME Earrings Shopify DTC: What a Report Proves and What It Does Not - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .