Factory-direct bridal jewelry, shipped to the USA

Necklaces & Pendants

Necklaces & Pendants Trade Show Sample: The Reject Tray Policy That Decides a Partner

9 November 2026 · 11 min

Step 01

Trade Show Sampling for necklaces and Pendants

A trade show converts on the sample that leaves the booth, not on the catalog that gets left behind. The sample card has to carry the model number, the metal, the stone size, the FOB price and the MOQ, or the follow-up email starts from zero, shipped as display tray with sample card and certified GRA report.

Ten to twelve pieces on a tray is the useful number for necklaces and Pendants. More than that and the buyer photographs instead of touching, and a photograph is not an order, quoted at USD 28-198 per piece in display tray with sample card.

Necklaces & Pendants wholesale piece from the HOLYCOME line in Wuzhou

The follow-up window is seven days. After that the card sits in a stack. We write the quote the same week and put the sample in the post so the buyer has the piece on the desk when the price arrives, shipped as display tray with sample card and certified GRA report.

Step 02

The Reject Tray Policy That Decides a Partnership

Last November, a US buyer of necklaces and Pendants placed 100 necklaces and Pendants against a sample signed in April. The first container landed with 9 pieces that failed on clasp fatigue alone, and USD 20-65 landed on the buyer's P&L before a single unit sold, quoted at USD 28-198 per piece in display tray with sample card.

The incoming report named clasp fatigue and the purchase order did not. On a Trade Show Sample run that gap between documents is the whole reason a tray fails inspection, which is how the Trade Show Sample account reads it at USD 28-198.

We did not touch the retail price. We changed what travels with the display tray with sample card carton, and the Trade Show Sample account stopped re-inspecting every tray, quoted at USD 28-198 per piece in display tray with sample card.

Necklaces & Pendants setting and finish detail on a HOLYCOME factory sample
Step 03

What US buyers Check Before They Sign

A quote for necklaces and Pendants usually states carat weight or metal type, and stops there. The four points below are what actually decide whether a run sells through or comes back, quoted at USD 28-198 per piece in display tray with sample card.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Stone color consistencyGraded by eye under D65Color matched to a retained master stone, per trayRepeat color complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement

Each line above is a gauge check, not a marketing claim. A factory that cannot state them in numbers is quoting an opinion about necklaces and Pendants, certified GRA report and packed display tray with sample card at 100 pieces, the figure being USD 28-198 for a 100-piece run.

Step 04

Where USD 28-198 Per Piece Actually Goes

At USD 28-198 per piece there is no room for hidden cost. The table shows where the money sits and which line a supplier can actually compress.

Cost lineShareWhat moves it
Base metal or alloy for necklaces and Pendants30%Alloy choice and casting yield
Stone or melee for necklaces and Pendants20%Sieve range and lot batching
Setting and finishing labor for necklaces and Pendants19%Jig design and bench minutes
Plating, polish and QC for necklaces and Pendants12%Per-tray versus per-piece checks
Packaging for necklaces and Pendants19%display tray with sample card

A supplier with no bench minutes per piece has never costed necklaces and Pendants. Ask for minutes and the reject rule before you ask for a discount, shipped as display tray with sample card and certified GRA report, the figure being USD 28-198 for a 100-piece run.

Step 05

The Reject Tray Policy That Decides a Partnership

For necklaces and Pendants at this price band, the honest answer is a range rather than a point, and the range has a reason, with GRA report and display tray with sample card stated on the same sheet.

The commercial version of this question for necklaces and Pendants is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, with GRA report and display tray with sample card stated on the same sheet.

That clause matters more than a discount on necklaces and Pendants. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, and at USD 28-198 for 100 pieces that is the number the buyer signs.

Step 06

What the Quote Actually Covers

Most quotes for necklaces and Pendants describe the product and skip the part that decides whether the buyer makes money, which is how the Trade Show Sample account reads it at USD 28-198.

What buyers underestimate on necklaces and Pendants is the cost of the interruption, not the cost of the piece. A missing 6% of a run stalls a launch, and a stalled launch costs more than the 6% ever did, which is how the Trade Show Sample account reads it at USD 28-198.

We plan a 3-5% buffer on first runs of necklaces and Pendants and tell the buyer it exists. Hiding a buffer and shipping it as production is how a supplier trains a buyer to distrust the count, which is how the Trade Show Sample account reads it at USD 28-198.

Step 07

Order Terms, Sample Timing and Packing

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Trade Show Sample order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is how the Trade Show Sample account reads it at USD 28-198.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 28-198 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the display tray with sample card format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is USD 28-198 on the Trade Show Sample schedule.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of clasp pull strength for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, shipped as display tray with sample card and certified GRA report.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and the Trade Show Sample quote for it sits at USD 28-198.

Step 08

The Three Failures We See Most in Incoming Samples

link stretch

Chain stretch starts at the link join where the wire was drawn thin to save metal. Measuring wire diameter at both ends of a run catches it before shipping, certified GRA report and packed display tray with sample card at 100 pieces.

Our countermeasure is a gauge and a written limit. It adds about 16 seconds per piece and removes the defect from the run rather than from the carton, with GRA report and display tray with sample card stated on the same sheet.

pendant bail shadow

A bail plated in a separate barrel than the chain shows a different white tone under store light. Plating a set in one barrel is the fix, shipped as display tray with sample card and certified GRA report.

In a 100-piece run this typically shows on 11 of pieces. Catching it means measuring clasp pull strength at the tray level, not inspecting the finished carton, and 100 pieces leaves Wuzhou in display tray with sample card at USD 28-198.

clasp fatigue

A spring clasp rated by catalog rather than by pull test opens after 40-60 wear cycles. The rating belongs on the spec sheet, not on the website, and the Trade Show Sample quote for it sits at USD 28-198.

The commercial effect is clasp replacement plus a goodwill credit, typically USD 7-12 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and 100 pieces leaves Wuzhou in display tray with sample card at USD 28-198.

Step 09

What This Means for a First Order

A first order of 50 pieces per design is a measurement, not a purchase. It shows how clasp pull strength and chain length within +/-3 mm behaves on this line and whether the QC sheet matches the carton, and the Trade Show Sample quote for it sits at USD 28-198.

Six weeks of testing is cheaper than a season of returns on necklaces and Pendants. That is the entire argument for a small first order, and 100 pieces leaves Wuzhou in display tray with sample card at USD 28-198.

Step 10

How a Repeat Order Gets Built

Nothing in this sequence is clever. Each step exists because skipping it produced a specific failure on a previous order of necklaces and Pendants, and at USD 28-198 for 100 pieces that is the number the buyer signs.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

Reorders run 12-15 days because the model, the gauge set and the signed spec stay in our system between the Trade Show Sample runs, which is USD 28-198 on the Trade Show Sample schedule.

Step 11

Freight, Duty and the Arrival Check

At 100 pieces the carton count drives freight more than the weight. display tray with sample card packs tighter than a display tray and saves a pallet position, shipped as display tray with sample card and certified GRA report.

FOB Guangzhou or Shenzhen is the default on necklaces and Pendants. Buyers new to the US market take DDP once and switch after they see the breakdown, with GRA report and display tray with sample card stated on the same sheet, which is how the Trade Show Sample account reads it at USD 28-198.

If clasp fatigue shows in the arrival check, the retained tray decides ownership. Keep the GRA report sheet beside the packing list, and 100 pieces leaves Wuzhou in display tray with sample card at USD 28-198.

Step 12

Frequently Asked Questions

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if clasp fatigue shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, which is how the Trade Show Sample account reads it at USD 28-198.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, which is how the Trade Show Sample account reads it at USD 28-198.

What is the minimum order for necklaces and Pendants?

50 pieces per necklaces and Pendant. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and at USD 28-198 for 100 pieces that is the number the buyer signs.

Do you supply certificates for necklaces and Pendants?

GRA report on necklaces and Pendants above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of clasp pull strength, which is what a counter or a listing actually needs, certified GRA report and packed display tray with sample card at 100 pieces.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if clasp fatigue shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, which is how the Trade Show Sample account reads it at USD 28-198.

Step 13

Next Step

Put your current quote beside ours on clasp pull strength and chain length within +/-3 mm, plating thickness, dimensional tolerance and the reject rule. The comparison usually settles it quickly, which is how the Trade Show Sample account reads it at USD 28-198.

HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 133 7744 7107, quoted at USD 28-198 per piece in display tray with sample card.

Related reading: Necklaces & Pendants Q4 Holiday Stock: What the Quote Actually Covers - HOLYCOME Earrings Bridal Boutique: The Sample Approval That Survives Production - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .