Engagement Rings
Cushion Cut Moissanite: The Soft, Romantic Bridal Shape
A buyer in Portland emailed us last spring with a bride who kept walking past every round brilliant in the case. She described what she wanted as something that looks like it hugs the finger. We sent a 6x6mm cushion cut moissanite in a four-prong 14k yellow gold setting and she said yes on first hold. Cushion cut is the shape that reads soft, rounded and romantic, and it now makes up 22% of our bridal engagement ring shipments after running at 11% two years ago.
Why cushion cut reads bridal softness
A cushion cut is a square or slightly rectangular stone with rounded corners and large facets. The rounded corners remove the hard angles of a princess cut, and the bigger facets scatter light in broad flashes rather than pinpricks. Moissanite has a refractive index of 2.65, above diamond at 2.42, but in a cushion cut that extra fire is softened by the rounded outline and the thicker girdle. The gemological profile of moissanite explains why the shape behaves differently from a diamond cushion of the same size: the double refraction turns small inclusions into gentle grey needles that read as charm under a loupe, not as returns.
For wholesale buyers, that softness is a selling point. Brides who avoid princess cuts because they look sharp and avoid emerald cuts because they look cold land on cushion. Stock 5x5mm as the entry, 6x6mm as the volume mover, and 7x7mm as the premium. If your shop already carries cushion stock, cross-sell into our piece on cushion cut setting choices and cushion vs emerald cut bridal looks.
Length-to-width ratio that sells
Cushion cuts come in square (1.0:1) and cushion rectangle (1.2:1 to 1.3:1). The 1.2:1 rectangle outsells square 3-to-1 in our orders because it reads longer on the finger and photographs softer. A 6x6mm square reads about 1.0 carat equivalent; a 6x8mm rectangle reads closer to 1.3. Spec the rectangle for brides who want finger elongation without the commitment of an oval. The GIA 4Cs framework treats cut proportion as the factor most buyers can see with the naked eye, which means cushion proportions are a merchandising lever, not a technical footnote.
Setting choices that protect the soft outline
The rounded corners that make cushion romantic also chip if a prong sits on the sharp point. We ship cushion cuts in two settings by default: a four-prong with rounded tips cupping the corners, and a bezel that wraps the outline. The bezel runs about 10% higher but survives brides who cook, garden or work with their hands. Avoid a heavy cathedral; it lifts the stone and exposes the culet to knocks on tabletops. For active brides, our guide on settings for active brides covers the durability trade-offs in detail.
Metal pairing: warm gold wins
Of the cushion moissanite rings shipped in the last 90 days, 58% went out in 14k yellow gold, 29% in rose gold and 13% in white gold or platinum. Yellow and rose gold warm the cool facet flashes and push the romantic read; white gold makes the stone look icy and modern. Platinum is the slow mover here because it adds weight cost without changing the soft look brides ask for. For brides comparing shapes on hand, our oval vs round on-hand comparison shows how elongated silhouettes sit beside cushion on the same finger.
Who this shape is right for
Cushion cut sells to three bride profiles we see repeatedly: the vintage bride who wants a 1920s-inspired pillow outline, the bride with shorter fingers who wants a square shape that does not widen the hand, and the bride who compares on a call and keeps saying she wants soft. If a customer describes the ring as cozy, warm or huggable, that is cushion language. We see about 30% of cushion buyers also buy a matching band that repeats the rounded corner, which lifts the average ticket by about $180. For buyers who want to test demand, start with four 6x6mm cushions and reorder based on the first two weeks of foot traffic.
What size cushion cut reads like a 1 carat diamond?
A 5x5mm cushion moissanite is roughly a 0.9 carat equivalent; a 6x6mm reads about 1.2. Because cushion faces sit slightly smaller than rounds of the same weight, size up by 0.1 to 0.2 carat equivalent to match retail expectations.
Does cushion cut moissanite show inclusions?
Less than emerald cut, more than round brilliant. The large facets turn small needles into soft flashes. Stock eye-clean VS-equivalent grades; below that, returns rise on zoom calls.
Can a cushion cut pair with a pave band?
Yes. Because the setting sits low and the corners are rounded, a pave or micro-pave band sits flush. See pave vs micro-pave durability for band choices.
Is cushion cut a good wholesale margin shape?
Cushion carries a 10% premium over round of the same carat equivalent because cutting waste runs about 40% versus 35% for a round. Retail brides accept the premium because they perceive the shape as designer.
Wholesale CTA: HOLYCOME ships cushion cut moissanite engagement rings in 5x5, 6x6 and 7x7mm across 14k yellow, rose and white gold. MOQ is 6 pieces per SKU for boutiques, 12 for chains. Request the current cushion price list and rounded-prong setting drawings from your account manager today.
Frequently Asked Questions
Is moissanite a good diamond alternative for retail buyers?
Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.
What is the minimum order for wholesale moissanite?
MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.
Do you provide certificates with moissanite stones?
Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.
How long does sample and bulk production take?
Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.
Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.
Ask the workshop



