Necklaces & Pendants
Necklaces & Pendants Spec Sheets: Six Fields Buyers Misread - GemWSL
Every necklaces & pendants category tells you what the factory can repeat, if you read it in the right order.
The spec sheet is the contract, not the brochure
A Necklaces & Pendants listing can be rewritten in an afternoon. The spec sheet behind it is what production actually works to. The range holds 67 designs in this category.
Reading six fields correctly removes most of the disputes that show up three months after an order.
The metal split is narrow on purpose: 925 sterling silver at 69% keeps the quote cycle short for most reorders.
Read the metal line as a lead time signal: 925 sterling silver at 69% is the path production already runs every week.
Field by field
| Field | What it controls | Common misread |
|---|---|---|
| Base metal | Wear life, repolishing | Read as plating color |
| Stone and origin | Disclosure, price band | Read as natural by default |
| Carat or size | Visual weight, quote | Read as approximate |
| Setting type | Repair path, stone security | Read as decorative detail |
| Finish | Surface look, rework cost | Read as permanent |
| MOQ | Order shape, stock access | Read as negotiable |
925 sterling silver accounts for 69% of the designs, with gold plated at 17%. Moissanite is the dominant stone at 82%.
With 67 designs on file, the reorder path usually exists before the first order is placed.
Two fields that carry the most risk
Setting type decides whether a stone can be replaced without remaking the piece, and finish decides whether a repolish restores the look or destroys it. Both are cheap to confirm before production and expensive to discover afterwards.
moissanite accounts for 82% of the designs, so stone sourcing is already settled for most of the range.
Where the stone changes, the price band usually changes with it, which is why moissanite at 82% anchors the core of the range.
How to test a spec sheet in one afternoon
- Match the metal stamp on the sample against the stated base
- Weigh the stone and compare with the carat figure
- Check the setting from the reverse side, not the front
- Confirm the finish under daylight, not studio light
- Ask what the MOQ changes if the design is altered
Reference designs in the range include 1 Carat Lab Grown Diamond Heart Cut Bezel Set Pendant 18K Gold Diamond Necklaces; Bow-knotted Ribbon Cubic Zirconia Pendant & Chain Necklace,earring,ring Jewelry; 18K Gold Plated Stelring Silver Irregular Geometric Pendant Necklace.
The figure of 67 is worth reconciling against your own shortlist before the quote, because it sets how much of the buy can be stock.
The quoted band runs from $253.75 to $293.45 with a median near $293.45, which is wide enough to cover two price slots.
Turning the sheet into a listing you can defend
A listing built from the sheet survives a returns conversation. A listing built from the photo does not. Copy the six fields across, state them plainly, and remove adjectives that the sheet does not support.
Quoted prices run from $253.75 to $293.45, with a median around $293.45.
Median quote sits near $293.45, with the working range between $253.75 and $293.45.
Range snapshot: Necklaces & Pendants by the numbers
Moissanite is the dominant stone at 82%.
| Dimension | Reading | Buying note |
|---|---|---|
| Designs on file | 67 | Shortlist can come from stock patterns |
| Dominant metal | 925 sterling silver (69%) | Quote cycle stays short |
| Dominant stone | moissanite (82%) | Sourcing already settled |
| Quoted band | $253.75 - $293.45 | Covers two price slots |
Quoted prices run from $253.75 to $293.45, with a median around $293.45. Read the snapshot before the shortlist: a category that is narrow in metal but deep in cut behaves differently from one that is the other way round.
Frequently Asked Questions
What if the spec sheet and the sample disagree?
The sample wins for the immediate order, but the disagreement has to be resolved in writing before a reorder, because production will follow the sheet.
Is the MOQ fixed per design?
It is set per design and per production path. Stock patterns carry the lowest minimums.
Can I get the sheet before ordering?
Yes, and it is the normal request. A factory that cannot produce one per design is a risk signal.
How detailed should my own listing be?
At least the six fields above. Detail that matches the sheet is what prevents disputes.
Does finish affect the price?
It can, because some finishes require extra handling. Ask whether the quoted finish is standard or a special request.
If you want to work from the current range rather than from a catalog PDF, send the two price slots you sell and the size bands you stock. We will reply with the designs that fit, the build on each, and the reorder path. GemWSL keeps the full range in one place.
Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.
Ask the workshop



