Necklaces & Pendants
Necklaces & Pendants Made to Order: Sample to Container: The Real Calendar
Sample to Container: The Real Calendar in the Made to Order Program
A US buyer of necklaces and Pendants sent us a competitor's necklaces and Pendant in June with one question: why does this fail at clasp fatigue after a season. We measured it, rebuilt the spec around clasp pull strength and chain length within +/-3 mm, and shipped 50 necklaces and Pendants that cleared inspection with zero rejects, shipped as single-piece foam box and certified IGI report.
The bench did not miss the defect, it was never asked to look for it. Clasp fatigue was absent from the purchase order, and a defect that is not named cannot be rejected on arrival, shipped as single-piece foam box and certified IGI report, quoted at USD 32-225 per piece in single-piece foam box.
The rebuild held the USD 32-225 quote and changed the plating log, the gauge and the tray rule. Second run shipped single-piece foam box with zero rejects.
The Made-to-Order Path for necklaces and Pendants
Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, priced at USD 32-225 for the 50-piece Made to Order run.
Twenty days is realistic for a new necklaces and Pendant when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, which the Made to Order file records at USD 32-225 in single-piece foam box.
The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, and 50 pieces leaves Wuzhou in single-piece foam box at USD 32-225.

Three Failures That Reach the Made to Order Bench
link stretch
Chain stretch starts at the link join where the wire was drawn thin to save metal. Measuring wire diameter at both ends of a run catches it before shipping, on a 50-piece Made to Order order at USD 32-225.
In a 50-piece run this typically shows on 8 of pieces. Catching it means measuring clasp pull strength at the tray level, not inspecting the finished carton, with IGI report and single-piece foam box stated on the same sheet.
pendant bail shadow
A bail plated in a separate barrel than the chain shows a different white tone under store light. Plating a set in one barrel is the fix, priced at USD 32-225 for the 50-piece Made to Order run.
The commercial effect is clasp replacement plus a goodwill credit, typically USD 7-12 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, the figure being USD 32-225 for a 50-piece run.
clasp fatigue
A spring clasp rated by catalog rather than by pull test opens after 40-60 wear cycles. The rating belongs on the spec sheet, not on the website, certified IGI report and packed single-piece foam box at 50 pieces.
Our countermeasure is a gauge and a written limit. It adds about 16 seconds per piece and removes the defect from the run rather than from the carton, which the Made to Order file records at USD 32-225 in single-piece foam box.
Four Spec Lines a Made to Order Buyer Checks
A Made to Order quote that states only metal and stone size leaves clasp fatigue undefined, and undefined is what gets rejected on arrival, and at USD 32-225 for 50 pieces that is the number the buyer signs.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Nothing here adds cost at USD 32-225. It adds documentation, and documentation is what the single-piece foam box carton is missing.
Terms Behind a Made to Order Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is how the Made to Order account reads it at USD 32-225.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 32-225 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, with IGI report and single-piece foam box stated on the same sheet.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of clasp pull strength for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, with IGI report and single-piece foam box stated on the same sheet.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, certified IGI report and packed single-piece foam box at 50 pieces.
Cost Split on a Made to Order Piece at USD 32-225
Buyers assume the stone dominates the cost of a necklaces and Pendant. At wholesale it is closer to a quarter, and the labor line is where two quotes for the same drawing diverge by double digits, with IGI report and single-piece foam box stated on the same sheet, with IGI report and single-piece foam box stated on the same sheet.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for necklaces and Pendants | 32% | Alloy choice and casting yield |
| Stone or melee for necklaces and Pendants | 23% | Sieve range and lot batching |
| Setting and finishing labor for necklaces and Pendants | 21% | Jig design and bench minutes |
| Plating, polish and QC for necklaces and Pendants | 14% | Per-tray versus per-piece checks |
| Packaging for necklaces and Pendants | 10% | single-piece foam box |
The cheapest quote for necklaces and Pendants usually hides its saving in the plating line and the stone grade. Both show up in the second season, not the first, priced at USD 32-225 for the 50-piece Made to Order run.
Carton Cube, Duty and the Freight Line That Surprises Buyers
This is the question that separates a trading company from a factory, and on necklaces and Pendants the answer is usually shorter than buyers expect, shipped as single-piece foam box and certified IGI report.
Three numbers decide it for necklaces and Pendants: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, with IGI report and single-piece foam box stated on the same sheet.
We send a one-page sheet with every necklaces and Pendants quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, and at USD 32-225 for 50 pieces that is the number the buyer signs.
Alloy, Karat and the Cost of a Color Change
Buyers ask it in the first call about necklaces and Pendants and rarely get a number they can put in a spreadsheet, on a 50-piece Made to Order order at USD 32-225.
There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on necklaces and Pendants and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, which is how the Made to Order account reads it at USD 32-225.
We would rather lose a first order of necklaces and Pendants on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, priced at USD 32-225 for the 50-piece Made to Order run.
The First Made to Order Order
The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, certified IGI report and packed single-piece foam box at 50 pieces, on a 50-piece Made to Order order at USD 32-225.
Sample in 3-5 days, bulk in 15-20 days under 500 pieces. At 50 pieces the calendar is the same on every Made to Order run, and 50 pieces leaves Wuzhou in single-piece foam box at USD 32-225.
Getting single-piece foam box to North American retail
For a Made to Order order at 50 pieces the carton count decides the freight more than the weight does. single-piece foam box packs tighter than a display tray, with IGI report and single-piece foam box stated on the same sheet.
The freight rate matters less than the clearance terms at USD 32-225 per piece. A duty surprise can cost more than the entire freight line.
At receiving, count cartons, weigh one tray of single-piece foam box and measure ten pieces against clasp pull strength. Twenty minutes here saves a season, on a 50-piece Made to Order order at USD 32-225.
The Calendar Behind a Made to Order Run
The calendar below is what we quote on a 50-piece run of necklaces and Pendants. It starts when the spec is signed, not when the deposit clears, the figure being USD 32-225 for a 50-piece run.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
MOQ stays at 50 pieces per design on the Made to Order program, low enough to test a category and high enough to keep the casting line accountable, quoted at USD 32-225 per piece in single-piece foam box.
Frequently Asked Questions
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and at USD 32-225 for 50 pieces that is the number the buyer signs.
How long does a reorder of the same necklaces and Pendant take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, quoted at USD 32-225 per piece in single-piece foam box.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white necklaces and Pendants, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, the figure being USD 32-225 for a 50-piece run.
How is necklaces and Pendants packed for single-piece foam box?
Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, priced at USD 32-225 for the 50-piece Made to Order run.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and at USD 32-225 for 50 pieces that is the number the buyer signs.
Next Step
Send one drawing or one competitor sample with your target landed cost. We answer with a tolerance sheet, a cost breakdown and a production calendar in two business days, shipped as single-piece foam box and certified IGI report, and the Made to Order quote for it sits at USD 32-225.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across necklaces and Pendants and adjacent categories. service@holycome.com or WhatsApp +86 133 7744 7107, which is USD 32-225 on the Made to Order schedule.
Related reading: Necklaces & Pendants Private Label Carton: AQL, Tray Checks and What a QC Report Shou - HOLYCOME Earrings Q4 Holiday Stock: What the Quote Actually Covers - HOLYCOME
Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.
Ask the workshop



