Necklaces & Pendants
The Necklaces & Pendants Custom Brief That Survives CAD - GemWSL
The question that decides a necklaces & pendants order is rarely the one printed in the catalog.
Most custom briefs die in the first render
A brief that says the design should feel delicate gives the CAD team nothing to measure. The range holds 67 designs in this category.
A brief that survives has numbers, priorities, and one named reference per dimension.
925 sterling silver carries 69% of the designs, which is why a metal change is a scheduling question and not a design question.
The metal split is narrow on purpose: 925 sterling silver at 69% keeps the quote cycle short for most reorders.
What the brief has to pin down
| Item | What to specify | Why it matters |
|---|---|---|
| Base metal | 925 sterling silver or an alternative | Sets the budget and the finish path |
| Stone | moissanite, size and count | Drives the setting and the price |
| Proportions | Shank width, setting height in mm | The two numbers that decide comfort |
| Size range | Smallest and largest to be quoted | Avoids a re-quote after approval |
Moissanite is the dominant stone at 82%.
The figure of 67 is worth reconciling against your own shortlist before the quote, because it sets how much of the buy can be stock.
Priorities, not adjectives
Rank three things and say which one gives way if the render cannot hold all of them: stone security, setting height, or shank weight. A brief without a priority list gets a render that satisfies none of them.
Reference designs in the range include 1 Carat Lab Grown Diamond Heart Cut Bezel Set Pendant 18K Gold Diamond Necklaces; Bow-knotted Ribbon Cubic Zirconia Pendant & Chain Necklace,earring,ring Jewelry; 18K Gold Plated Stelring Silver Irregular Geometric Pendant Necklace.
moissanite accounts for 82% of the designs, so stone sourcing is already settled for most of the range.
The approval loop
- Approve the wireframe before the render
- Check stone seating in the render, not the hero angle
- Confirm dimensions in millimetres on the drawing
- Sign off the metal and finish on a physical sample
Each step is cheaper than the one after it, which is why the order matters.
With 67 designs on file, the reorder path usually exists before the first order is placed.
At $293.45 median, the middle of the range is where most reorders land, and the two ends are sample territory.
What to keep from the process
Keep the approved drawing, the spec sheet and the sample photos together. That file is what makes a reorder a reorder instead of a new project.
Quoted prices run from $253.75 to $293.45, with a median around $293.45.
The distance between $253.75 and $293.45 is the room a promotion has before the margin goes, so it is worth reading before a discount.
Range snapshot: Necklaces & Pendants by the numbers
Moissanite is the dominant stone at 82%.
| Dimension | Reading | Buying note |
|---|---|---|
| Designs on file | 67 | Shortlist can come from stock patterns |
| Dominant metal | 925 sterling silver (69%) | Quote cycle stays short |
| Dominant stone | moissanite (82%) | Sourcing already settled |
| Quoted band | $253.75 - $293.45 | Covers two price slots |
Quoted prices run from $253.75 to $293.45, with a median around $293.45. Read the snapshot before the shortlist: a category that is narrow in metal but deep in cut behaves differently from one that is the other way round.
Frequently Asked Questions
How long does a custom brief take to prepare?
An hour with the fields above is enough. Most delays come from missing dimensions, not from design debate.
Should the brief include a reference image?
One reference per dimension, clearly labelled as a reference rather than a copy target.
Can the factory change the design during CAD?
They can propose changes, but the priority list decides which proposals are acceptable.
What is the most expensive omission?
Setting height. It is the number that most often forces a rebuild after approval.
Does custom work need a separate MOQ?
Yes. Custom runs are quoted per order and usually carry a higher minimum than stock patterns.
If you want to work from the current range rather than from a catalog PDF, send the two price slots you sell and the size bands you stock. We will reply with the designs that fit, the build on each, and the reorder path. GemWSL keeps the full range in one place.
Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.
Ask the workshop



