Engagement Rings
How to Clean Your Engagement Ring at Home Safely
If your engagement ring has lost some of its fire, before you assume something is wrong, look closer. Most of the time a ring looks dull because a thin film of hand cream, soap, oil, and everyday dust has settled on the stone and under the prongs. The fix is simple, free, and takes about five minutes.
The safe home-cleaning method
Fill a small bowl with warm, not hot, water and add a drop of mild dish soap. Let the ring soak for 20 to 30 minutes to soften the grime. Then gently brush behind the stone and around the prongs with a soft-bristled brush, like a clean makeup brush or a jewelry brush. Pay attention to the underside of the stone, where buildup hides most. Rinse under warm water, and catch the runoff in a plugged sink or a strainer so nothing slips away. Pat dry with a lint-free cloth.

What to avoid
Not every cleaning method is kind to a ring. Avoid chlorine bleach, especially around gold, because it can damage and discolor the metal over time. Skip harsh household cleaners, abrasives, and toothpaste, which can scratch the band. Steam cleaners and ultrasonic machines are best left to a jeweler unless you know your stone and setting can handle them, since older treatments or loose prongs can be worsened by aggressive cleaning.
How often to clean it
A monthly gentle clean keeps your ring looking its best. If you apply lotion, hairspray, or sunscreen often, you may want to do it every couple of weeks. The underside of the stone is where the film accumulates, so that one small area usually does more for the sparkle than anything else.
Protect it between cleanings
Prevention is easier than cleaning. Take the ring off when you apply lotion, spray hairspray, clean with chemicals, or work with your hands. Take it off at the gym, when gardening, and when washing dishes, where a hard knock can loosen a prong. Store it separately in a soft pouch or its own slot so it does not scratch against other jewelry. A quick habit now protects the stone for years.
When to see a jeweler
Every six months, have a jeweler check the prongs. They will look for a worn or bent tip and tighten anything that has loosened. This takes minutes and is the single best way to avoid losing a stone. A jeweler can also give the ring a professional ultrasonic or steam clean that reaches places a home brush cannot. If you notice a prong that feels sharp, a stone that shifts, or a crack you cannot explain, do not wait for the next scheduled check.
Moissanite and diamond alike
The same gentle method works for both diamond and moissanite. Both are hard stones that respond well to a warm soapy soak, and both suffer from the same hidden buildup under the setting. There is no need for special products; mild soap, warm water, and a soft brush are enough.
Avoid the sink, the pool, and the hot tub
Two everyday settings quietly damage rings more than wear does. The first is running water: rinse over a plugged sink or a strainer, because a wet stone on a slippery finger slips off easily. The second is chlorine, found in pools, hot tubs, and household bleach. Chlorine does not harm a diamond or moissanite, but it can pit and discolor gold and weaken solder joints over repeated exposure. Take the ring off before a swim and you remove a whole category of avoidable damage. Lotion, sunscreen, and perfume are gentler, but they leave the film that dulls the stone, so a quick wipe after applying them keeps things brighter.
A simple care routine that sticks
You do not need an elaborate ritual. Keep the ring in one agreed spot on your dresser so taking it off becomes automatic. Wash it at home once a month with warm soapy water and a soft brush. Book a professional clean and prong check every six months, which most jewelers do while you wait. That habit catches a worn prong before a stone is lost, and it is the single cheapest protection you can give the ring. See more everyday guidance in our care notes across the engagement rings and wedding bands collections, which share the same gentle cleaning rules.
A clean ring looks brand new because most of what dims it is invisible until it is gone. Spend those five minutes once a month, get the prongs checked twice a year, and your engagement ring will keep its first-day sparkle for a very long time.
Independent background on moissanite — how its hardness and refractive index compare with diamond — is documented in the Wikipedia article on moissanite.
Frequently Asked Questions
What ring sizes can you supply in bulk?
US sizes 5–12 including half sizes. Send a size breakdown with your order and we cast to that curve; comfort-fit inner bands reduce resize requests.
Can I order a mixed size run instead of one size?
Yes. Mixed runs are standard for wholesale: specify quantity per size and we pack and label by size at no extra labor cost.
What is the MOQ for custom ring designs?
50 pieces per design for existing molds; 100–300 pieces when a new mold or CAD model is required.
How should I price rings for retail margin?
Most partners use a 3–4x markup on FOB cost for sterling and 2.5–3x for moissanite solos, which keeps landed cost under 30% of retail.
Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.
Ask the workshop



