Wedding Rings & Bands
Stackable Wedding Bands: Rings That Pair With an Engagement Ring
A customer returns an engagement ring and wedding band set because the wedding band rocks against the halo, leaving a gap you can see daylight through. The two rings were bought separately, in different shops, and no one checked the shank profile. That gap is the whole problem stackable design solves. A well-designed stack sits flush, level and silent against the engagement ring, and it is one of the most repeat-purchase SKUs in bridal jewelry.
The three stack geometries
A straight band (flat top, flat bottom) sits flush only against a solitaire with a thin shank. Against a halo, cathedral or raised setting, the straight band leaves a gap. The fix is one of three profiles:
- Contour band: the inner edge of the band curves to follow the base of the engagement ring. It sits close but leaves a small natural gap.
- Notched band: a small scoop is cut into the band to clear the setting prongs or head. It sits the tightest but requires exact measurements.
- Flat (flush) band: the engagement ring shank is designed at the same time as the wedding band, so the two sit perfectly level. This is the bridal-set approach.
Most of our wholesale clients stock contour bands as the default because they fit a range of engagement ring styles.
Mixed-metal stacking
Stacking in mixed metals is a 2024-2025 bridal trend. A well-made stack leaves a 0.1mm to 0.2mm clearance between shanks.
Mixed-metal stacking
Stacking in mixed metals is a 2024-2025 trend. A well-made stack leaves 0.1mm to 0.2mm clearance between shanks.
The karat alloy reference on Wikipedia lists expansion behavior. Match band width to shank width within 1mm.
The karat alloy reference on Wikipedia lists common alloys. Match band width to shank width within 1mm.
Pave bands stack best against plain shanks. Leave a 0.3mm divider if both rings are pave. For pavé durability see pave vs micro-pave.
Sizing for a stack
A stack of two rings should be sized together. If the engagement ring fits perfectly, order the wedding band at the same size and check on a mandrel stacked together. Ordering the band a half-size larger is the standard workaround.
Frequently asked questions
What is a contour wedding band?
A contour band has a curved inner edge that follows the base of an engagement ring setting. It sits close without a custom notch.
Can I stack two pave rings together?
Not recommended long-term. Two pave surfaces grind against each other. Stack pave with plain metal, or leave a 0.3mm smooth divider.
Should the wedding band match the engagement ring width?
Within 1mm. A 2mm band pairs with a 2mm shank. Wider bands against thin shanks look lopsided.
Wholesale note: HOLYCOME produces contour, notched and flush-fit stackable bands in 14k, 18k and platinum, 2mm to 4mm widths. Pair with moissanite engagement rings, build bridal sets, and compare wedding band metals. Request a stackable band sample tray.
Why stackable bands drive repeat purchases
A bride who buys a contour band on her wedding day often returns for a second stackable band on her first or second anniversary. The repeat-purchase rate on stackable bands in our wholesale program is roughly 28% within 24 months, compared to 9% for plain wedding bands. The reason is simple: stacking is a customizable look that grows with the wearer. Stock a range of thin, textured and diamond-accented bands so the bride has a reason to come back.
Why stackable is a repeat-purchase driver
A bride who buys a contour band on her wedding day often returns for a second stackable band on her first or second anniversary. The repeat-purchase rate on stackable bands in our wholesale program is roughly 28% within 24 months, compared to 9% for plain wedding bands. The reason is simple: stacking is a customizable look that grows with the wearer. Stock a range of thin, textured and diamond-accented bands so the bride has a reason to come back. For anniversary gifting ideas, see tennis bracelet as anniversary gift.
For couples who want matching widths, stock 5mm to 6mm bands that work for both genders. The sell-through on unisex bands has grown 15% year over year across our wholesale program as gender-neutral jewelry becomes more mainstream. Price the stackable range at 2.2x to 2.6x cost for a healthy margin.
For mixed-metal stacking, choose one dominant metal and use the accent metal in thin 1.5mm bands. Two thick bands in different metals read as a mismatch. The stack should look like one coordinated set, not two separate rings worn together.
Display stackable bands next to engagement rings in your case. The cross-sell rate when displayed together is roughly 35%. When displayed separately, it drops to 12%. Merchandising matters.
The karat alloy reference on Wikipedia lists expansion behavior. Match band width to shank width within 1mm.
Frequently Asked Questions
What ring sizes can you supply in bulk?
US 5 to 12 including half sizes. Send a size curve with the order and we cast to it.
Can I order a mixed size run?
Yes. Mixed runs are standard; specify quantity per size and we pack and label by size.
What is the MOQ for custom ring designs?
50 pieces per design on existing molds; 100 to 300 pieces when a new mold or CAD model is needed.
How should I price rings for retail margin?
Most partners use a 3 to 4x markup on FOB cost for sterling and 2.5 to 3x for moissanite solos.
Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.
Ask the workshop



