Factory-direct bridal jewelry, shipped to the USA

Engagement Rings

Engagement Rings B2B: What the Quote Actually Covers

9 November 2026 · 10 min

Step 01

What the Quote Actually Covers

The brief was simple: 600 engagement Rings, 925 sterling silver, delivered before August. The run that arrived carried 17 pieces with prong geometry, and the buyer spent USD 25-80 on sorting before the goods reached a shelf.

Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and prong geometry is what a photograph fails to define. That is the figure we hold for engagement Rings at USD 38-210 per piece, and it does not move inside the order window.

Engagement Rings wholesale product photo from the HOLYCOME line in Wuzhou

The fix cost about 22 seconds per engagement Ring and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote. That is the figure we hold for engagement Rings at USD 38-210 per piece, and it does not move inside the order window.

Step 02

What US buyers Check Before They Sign

A quote for engagement Rings usually states carat weight or metal type, and stops there. The four points below are what actually decide whether a run sells through or comes back. That is the figure we hold for engagement Rings at USD 38-210 per piece, and it does not move inside the order window.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Prong Geometry on engagement RingsInspected visually at the trayGauntlet check on every piece, limit written in the specReturns inside 60 days of wear
Rhodium Burn Off on engagement RingsBatch dependent, not loggedThickness and tension logged per lotComplaint after the second season
Size Step Drift on engagement RingsEstimated from nominalGauged per size with go/no-go toolsResize queue and reship cost
Tolerance stack-up on engagement RingsQuote states nominal onlyWorst-case band published per SKUFreight and duty drift

Each line above is a gauge check, not a marketing claim. A factory that cannot state them in numbers is quoting an opinion about engagement Rings. That is the figure we hold for engagement Rings at USD 38-210 per piece, and it does not move inside the order window.

Step 03

Where USD 38-210 Per Piece Actually Goes

At USD 38-210 per piece there is no room for hidden cost. The table shows where the money sits and which line a supplier can actually compress. That is the figure we hold for engagement Rings at USD 38-210 per piece, and it does not move inside the order window.

Engagement Rings close-up of setting and finish, HOLYCOME factory sample
Cost lineShareWhat moves it
Base metal or alloy for engagement Rings30%Alloy choice and casting yield
Stone or melee for engagement Rings20%Sieve range and lot batching
Setting and finishing labor for engagement Rings19%Jig design and bench minutes
Plating, polish and QC for engagement Rings12%Per-tray versus per-piece checks
Packaging and freight for engagement Rings19%Box grade and DDP versus FOB

A factory that cannot state its bench minutes per piece has never costed its own line. Ask for minutes and for the reject rule, not for a discount. That is the figure we hold for engagement Rings at USD 38-210 per piece, and it does not move inside the order window.

Step 04

The Three Failures We See Most in Incoming Samples

prong geometry

A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close.

In a 600-piece run this typically shows on 17 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton.

rhodium burn-off

A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters.

The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return.

size-step drift

A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch.

Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton.

Step 05

What the Quote Actually Covers

Buyers ask it in the first call about engagement Rings and rarely get a number they can put in a spreadsheet.

Three numbers decide it for rings: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent.

We send a one-page sheet with every engagement Rings quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing.

Step 06

How a Repeat Order Gets Built

Nothing in this sequence is unusual, and that is the point. Each step exists because skipping it produced a specific failure on a previous order. That is the figure we hold for engagement Rings at USD 38-210 per piece, and it does not move inside the order window.

  1. Spec sheet signed before casting: lost-wax cast, tolerances, plating thickness and packing format.
  2. Sample in 3-5 working days from stock components, or about 20 days if a new model is required.
  3. Production photos at three checkpoints: raw cast, post-polish, post-set, with buyer approval at each.
  4. Bulk in 15-20 days under 500 pieces; custom tooling runs 25-30 days.
  5. Pre-shipment QC report with per-tray counts and a retained reference tray for disputes.

Reorders inside this sequence run 12-15 days because the model, the gauge set and the signed spec stay in our system. That is the figure we hold for engagement Rings at USD 38-210 per piece, and it does not move inside the order window.

Step 07

What the Quote Actually Covers

Buyers who have run three programs on engagement Rings know this instinctively; first-time buyers learn it the expensive way.

At 600 pieces the arithmetic on rings changes: the fixed costs spread, the variable costs do not. That is why the second order prices better than the first even when the gold fix has moved up.

We quote both a first-run price and a reorder price for engagement Rings on the same sheet so the buyer can see where the curve flattens. Most flatten by the third run.

Step 08

Sample to Container: The Real Calendar

The number is less interesting than the rule behind it, and engagement Rings is where that rule gets tested.

One practical note on timing for rings: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five.

We date the engagement Rings proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet.

Step 09

MOQ, Mixed Designs and the Real First Order

Buyers in the American bridal market tend to over-index on unit price for engagement Rings and under-index on what happens after delivery.

Buyers who get this wrong on rings usually get it wrong in the first order and correct it in the second. The cost of that correction is rarely the money; it is the four to six weeks of shelf time lost while a replacement run of rings is scheduled behind other orders.

Our approach is to write the rule into the engagement Rings spec sheet before casting, then test it on the first tray. A rule that only exists in an email is not a rule, and a rule that is not tested is a hope.

Step 10

What This Means for a First Order

A first order of 50 pieces per design is a measurement, not a purchase. It shows how stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm behaves on this line and whether the QC sheet matches the carton. That is the figure we hold for engagement Rings at USD 38-210 per piece, and it does not move inside the order window.

Six weeks of testing is cheaper than a season of returns on engagement Rings. That is the entire argument for a small first order. That is the figure we hold for engagement Rings at USD 38-210 per piece, and it does not move inside the order window.

Step 11

Freight, Duty and the Arrival Check

Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east. That is the figure we hold for engagement Rings at USD 38-210 per piece, and it does not move inside the order window.

For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge. That is the figure we hold for engagement Rings at USD 38-210 per piece, and it does not move inside the order window.

Check the count, the weight and stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns. That is the figure we hold for engagement Rings at USD 38-210 per piece, and it does not move inside the order window.

Step 12

Frequently Asked Questions

What is the minimum order for engagement Rings?

50 pieces per engagement Ring. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 we cannot keep the gauge check independent of the shift, which is the part buyers actually pay for on engagement Rings.

How long does a reorder of the same engagement Ring take?

12-15 days for engagement Rings, because the model, the gauge set and the signed spec stay in our system. A first run is longer: 3-5 days for a stock-component sample, about 20 days if a new model is needed, then 15-20 days for bulk under 500 pieces.

Do you supply certificates for engagement Rings?

IGI or GRA above 0.50 ct for engagement Rings. Below that threshold we supply a batch report plus per-piece measurement of stone retention after a 40-cycle wear test, which is what most resellers need at the counter.

What finish do you use on engagement Rings, and how thick is it?

Rhodium at 0.20 micron minimum on white engagement Rings, with a palladium strike layer so wear-through reads white rather than yellow. Thickness is logged per lot and appears on the QC sheet, not only in the brochure.

How do you handle a rejected tray of engagement Rings?

We replace or credit inside the same order cycle. The retained reference tray decides: if prong geometry shows on our retained engagement Ring we own it, and if it appeared in transit we split the assay cost and file with the carrier. A typical exposure on engagement Rings is a return shipment plus a resize labor claim, typically USD 9-14 per piece.

Step 13

Next Step

Put your current quote beside ours on stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm, plating thickness, dimensional tolerance and the reject rule. The comparison usually settles it quickly. That is the figure we hold for engagement Rings at USD 38-210 per piece, and it does not move inside the order window.

HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 133 7744 7107.

Related reading: Wedding Rings & Bands B2B: MOQ, Mixed Designs and the Real First Order - HOLYCOME Earrings Wholesale: Carton Cube, Duty and the Freight Line That Surprises Buyers - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .