Factory-direct bridal jewelry, shipped to the USA

Engagement Rings

Bulk Moissanite Engagement Rings Wholesale: Size-That Sells Assortments

18 September 2026 · 4 min

A bridal boutique outside Austin ordered 150 round-brilliant moissanite solitaire rings from a new vendor at a tempting unit price. When the parcel arrived, 61 of the 150 were size 6 and only nine combined sizes 4.5 and 8. Within four months, 34 units were unsold. The stone quality was fine. The assortment was the problem. Bulk moissanite engagement rings wholesale lives or dies on size distribution, setting durability and plating thickness far more than on the carat weight on the spec sheet.

Step 01

Why size splits kill margins before you price them

Factory-default size packs are built around the easiest casting numbers, not around what North American brides actually wear. A default split often looks like 10% size 5, 50% size 6, 25% size 7, 15% size 8. Real US bridal sell-through, according to the sizing data we collect from 200-plus reordering accounts, looks closer to this:

Ring sizeTypical factory packBest-practice US split
4.5 and below5%12-15%
5 to 5.7510%20-25%
6 to 6.7550%35-40%
7 to 7.7525%15-20%
8 and above10%8-12%

A 30-piece shortfall in size 5 to 5.75 means roughly 30 lost sales during peak season, because most brides will not wait six weeks for a made-to-order resit when a competitor has the size on hand.

Step 02

Specs that separate a 1.5% defect rate from a 6% one

When you compare quotations for bulk moissanite engagement rings, the unit price is the headline, but the durability numbers below decide your after-sales load. Moissanite sits at Mohs 9.25, second only to diamond, so chipping is rare; the failure points are prongs, plating and stone alignment, not the stone itself.

  • Prong pull test. We test every solitaire and halo at 1.5kg of lateral pull on each of the four or six prongs. Industry norm is a visual check, which misses roughly one loose prong in forty.
  • Rhodium plating. 0.5 micrometre on 925 sterling silver, polished over a nickel-free undercoat. Industry norm is 0.3 micrometre, which begins to show brass tone around the fourth or fifth month of daily wear.
  • Shank thickness. We hold solitaire shanks to 1.6mm at the base, so the ring survives a comfort-fit band being worn flush against it without denting.
  • Stone grading. Every 1ct-and-up moissanite leaves our bench with a GRA report stating cut, color grade and carat. We never present moissanite as GIA-graded; GIA does not grade moissanite.
  • Finishing tolerance. Mirror polish at 3000 grit, with no visible tool marks under 10x magnification on the crown.
Step 03

How to buy by buyer profile

Small-batch opening buyers. Start with 20 pieces across four designs (solitaire, three-stone, halo, and a petite option). Take the recommended size split above and ask the supplier to confirm it in writing. Reorder only the two designs that moved fastest in the first six weeks.

Established boutiques. Move to 80-150 units per buy, but negotiate a size-swap clause: slow-moving sizes can be exchanged within 60 days against your next PO. This is the single largest margin protection available once you have two reorder cycles of data.

Private-label programs. At 300-plus units, tooling for a custom head or a custom shank profile becomes viable. Budget $300-$800 per mold and expect 15-20 days of extra lead time. The payback is usually twelve months at a 25% price premium over stock designs.

Step 04

Frequently Asked Questions

What is the MOQ for bulk moissanite engagement rings?

Our standard wholesale MOQ is 20 pieces per order, with a 3-piece minimum per design. This lets a new boutique test four to six head styles before committing to a larger reorder.

Do you ship moissanite rings with certificates?

Every stone from 1ct upward ships with a GRA report covering cut, color, clarity and carat. Finished rings also carry an in-house QC tag recording the prong pull test and plating thickness.

Can you adjust the size distribution of a bulk order?

Yes. We default to a US sell-through split, but we rewrite the size ladder on any PO above 40 pieces to match your local customer base once you have reorder data to share.

How long does bulk production take?

Stock designs ship in 5-7 business days. Made-to-order sizes, custom engraving and private-label plating take 12-18 business days after artwork approval.

What defect rate should I expect on bulk moissanite rings?

Our accepted ceiling is 1.5% of units for manufacturing defects, with replacement freight on us. Industry average across Chinese silver moissanite suppliers runs closer to 3-6% on un-inspected parcels.

Step 05

Takeaways

  • Negotiate the size split before the price; a bad split costs more than a 5% unit discount saves.
  • Ask for the prong pull test weight and rhodium plating thickness in writing.
  • First bulk buy should be under 50 pieces until one clean reorder cycle proves the designs.
  • Request a sample parcel: MOQ 20 pcs, DDP to your address, ships in 5 business days.

See the range on moissanite engagement rings, pair them with wedding bands, or read the buyer guides.

The Gemological Institute of America’s gem encyclopedia is an authoritative, widely cited reference on moissanite and diamond quality factors.

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .