Factory-direct bridal jewelry, shipped to the USA

Loose Stones

Loose Stones Vermeil Upgrade: Carton Cube, Duty and the Freight Line That Surprises B

9 November 2026 · 11 min

Step 01

Vermeil and Gold Plating Specs for loose Stones

Vermeil means a gold layer of at least 2.5 microns over sterling silver, and the US market reads that number as a material claim rather than a finish note. Below 2.5 microns the piece is gold-plated, not vermeil, and the word cannot be used, and 100 pieces leaves Wuzhou in retail box with care card at USD 4-152.

We run 3 microns on loose Stones for accounts that publish the claim, with a palladium strike layer so wear-through reads white and not yellow. Thickness is logged per lot and appears on the GRA report batch sheet, with GRA report and retail box with care card stated on the same sheet.

Loose Stones wholesale piece from the HOLYCOME line in Wuzhou

The cost difference is real: the USD 4-152 band moves up roughly sixty percent against rhodium-finished silver, and the retail price has to carry that or the margin disappears in the second season when the plating shows wear.

Step 02

Why the Vermeil Upgrade Quote Looks Cheap Until It Lands

In August, a US buyer of loose Stones ordered 100 loose Stones and asked for the same calibrated sizes from 1.5 mm to 12 mm as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, which is USD 4-152 on the Vermeil Upgrade schedule.

In the Vermeil Upgrade file the failure was already written down. Sieve drift sat in the buyer's own incoming report from the previous season and nobody carried it forward, so the same line failed twice, and 100 pieces leaves Wuzhou in retail box with care card at USD 4-152.

The second run shipped retail box with care card with the spec stapled to the packing list. Zero rejects on arrival, and the buyer's own bench stopped re-inspecting, with GRA report and retail box with care card stated on the same sheet.

Loose Stones setting and finish detail on a HOLYCOME factory sample
Step 03

What Fails First on loose Stones

sieve drift

A parcel sold as 2.0-2.2 mm with 15% of stones at 1.9 mm changes the setting labor on the buyer's bench. Sieve the parcel, do not sample it, on a 100-piece Vermeil Upgrade order at USD 4-152.

Our countermeasure is a gauge and a written limit. It adds about 6 seconds per piece and removes the defect from the run rather than from the carton, quoted at USD 4-152 per piece in retail box with care card.

mixed color lots

Mixing near-colorless and G-H stones in one parcel produces a finished piece with a visible tonal step. Parcels ship by single lot, with GRA report and retail box with care card stated on the same sheet.

In a 100-piece run this typically shows on 11 of pieces. Catching it means measuring size distribution within the declared sieve at the tray level, not inspecting the finished carton, and the Vermeil Upgrade quote for it sits at USD 4-152.

girdle damage

Stones packed loose in a bag chip each other in transit. Individually wrapped parcels cost more and arrive usable, the figure being USD 4-152 for a 100-piece run.

The commercial effect is replacement stones plus a sorting delay on the buyer's line. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, with GRA report and retail box with care card stated on the same sheet.

Step 04

What a USD 4-152 Quote Hides

The 100-piece Vermeil Upgrade price splits as below. The line that decides season two is the plating and QC share, not the metal, on a 100-piece Vermeil Upgrade order at USD 4-152.

Cost lineShareWhat moves it
Base metal or alloy for loose Stones34%Alloy choice and casting yield
Stone or melee for loose Stones25%Sieve range and lot batching
Setting and finishing labor for loose Stones22%Jig design and bench minutes
Plating, polish and QC for loose Stones15%Per-tray versus per-piece checks
Packaging for loose Stones4%retail box with care card

Five lines, one price. If the supplier will not break them out, the number being compared is not a loose Stones price, and at USD 4-152 for 100 pieces that is the number the buyer signs.

Step 05

The Measurements Behind a USD 4-152 Quote

Specification is the only part of a loose Stones quote that survives the season. These four measurements are what we write into the retail box with care card paperwork, and 100 pieces leaves Wuzhou in retail box with care card at USD 4-152.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Plating thicknessNominal only0.20 micron rhodium logged per lot, 3 microns on vermeilWear-through inside one season
Surface porosity after polishSeen after platingCast porosity checked before plating, rejects pulled at that stagePlating blister six weeks later
Stone color consistencyGraded by eye under D65Color matched to a retained master stone, per trayRepeat color complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost

Every line above is measurable with a gauge and a scale. At USD 4-152 per piece, a supplier who cannot state them is selling a photo.

Step 06

MOQ, Samples and the Balance

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Vermeil Upgrade order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, on a 100-piece Vermeil Upgrade order at USD 4-152.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 4-152 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the retail box with care card format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, on a 100-piece Vermeil Upgrade order at USD 4-152.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of size distribution within the declared sieve for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, with GRA report and retail box with care card stated on the same sheet.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and 100 pieces leaves Wuzhou in retail box with care card at USD 4-152.

Step 07

What a Report Proves and What It Does Not

Every year we see the same omission in loose Stones spec sheets, and every year it costs a buyer a season, priced at USD 4-152 for the 100-piece Vermeil Upgrade run.

We run this check per tray rather than per carton because the defect that matters on loose Stones is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, with GRA report and retail box with care card stated on the same sheet.

The report the buyer receives states the count per tray, the measured average and the outlier count for loose Stones. It is deliberately unglamorous, and it is the document that settles most disputes before they start, the figure being USD 4-152 for a 100-piece run.

Step 08

The Sample Approval That Survives Production

The number is less interesting than the rule behind it, and loose Stones is where that rule gets tested, and 100 pieces leaves Wuzhou in retail box with care card at USD 4-152.

The buyers who get the most out of loose Stones treat the first order as a measurement, not as a purchase. They buy a small run, measure the four numbers that matter, and then commit, which the Vermeil Upgrade file records at USD 4-152 in retail box with care card.

We support it directly on loose Stones: a 50-piece test run per design, the same gauge standard as a bulk order, and the same retained tray. Small does not have to mean loose, shipped as retail box with care card and certified GRA report.

Step 09

The Dock Check on loose Stones

We ship from Guangzhou or Shenzhen, and the port choice follows the carrier rate rather than a fixed habit, with GRA report and retail box with care card stated on the same sheet, and at USD 4-152 for 100 pieces that is the number the buyer signs.

DDP suits a first Vermeil Upgrade order because the duty invoice arrives after the carton clears, and that is the line buyers forget to budget, which the Vermeil Upgrade file records at USD 4-152 in retail box with care card.

The arrival check is three steps and none needs a lab: count against the packing list, weigh a sample, measure ten pieces, and the Vermeil Upgrade quote for it sits at USD 4-152.

Step 10

From Spec to retail box with care card

Our process is deliberately boring, because boring is what survives a bulk run with several sets of hands on it, which is USD 4-152 on the Vermeil Upgrade schedule.

  1. Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
  2. Cut the model in wax or resin and photograph it on the gauge before metal is committed.
  3. Cast the first article, set the stones and finish it exactly as bulk will be finished.
  4. Send the first article for approval with the weight and the stone measurements stated.
  5. Run the balance of the order in 25-30 days, holding the approved article as the reference.
  6. Ship with the approved article photographed beside a production piece from the same tray.

A first order at 50 pieces per design is a measurement rather than a purchase. It tells you what size distribution within the declared sieve and zero girdle chips on arrival looks like from this line, on a 100-piece Vermeil Upgrade order at USD 4-152.

Step 11

A 100-Piece Test Run

The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, and 100 pieces leaves Wuzhou in retail box with care card at USD 4-152.

Put the reject rule in writing before the deposit. The Vermeil Upgrade conversation after arrival is shorter when the rule is on the order already, with GRA report and retail box with care card stated on the same sheet.

Step 12

Frequently Asked Questions

How long does a reorder of the same loose Stone take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and the Vermeil Upgrade quote for it sits at USD 4-152.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white loose Stones, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which the Vermeil Upgrade file records at USD 4-152 in retail box with care card.

How is loose Stones packed for retail box with care card?

Every unit goes into a foam-backed pouch, then the retail box with care card, then the outer carton at 100 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, priced at USD 4-152 for the 100-piece Vermeil Upgrade run.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, quoted at USD 4-152 per piece in retail box with care card.

How long does a reorder of the same loose Stone take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and the Vermeil Upgrade quote for it sits at USD 4-152.

Step 13

Next Step

Send a photo or a drawing of the piece you want in retail box with care card, and the reply carries a price, a calendar and the four measurements, and 100 pieces leaves Wuzhou in retail box with care card at USD 4-152.

The factory behind loose Stones here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 133 7744 7107 on WhatsApp, the figure being USD 4-152 for a 100-piece run.

Related reading: Loose Stones Amazon FBA Ready: Alloy, Karat and the Cost of a Color Change - HOLYCOME Loose Stones Made to Order: Sample to Container: The Real Calendar - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .