Factory-direct bridal jewelry, shipped to the USA

Loose Stones

Loose Stones Made to Order: Sample to Container: The Real Calendar

9 November 2026 · 11 min

Step 01

Why the Made to Order Quote Looks Cheap Until It Lands

Two buyers ordered the same loose Stone in the same month. One paid 9% less and absorbed 23 rejects out of 50 pieces; the other paid our quote and shipped clean. The difference was sieve drift, and it was measurable on both benches, which is how the Made to Order account reads it at USD 3-118.

In the Made to Order file the failure was already written down. Sieve drift sat in the buyer's own incoming report from the previous season and nobody carried it forward, so the same line failed twice, the figure being USD 3-118 for a 50-piece run.

Loose Stones wholesale piece from the HOLYCOME line in Wuzhou

The second run shipped single-piece foam box with the spec stapled to the packing list. Zero rejects on arrival, and the buyer's own bench stopped re-inspecting, which is how the Made to Order account reads it at USD 3-118.

Step 02

The Made-to-Order Path for loose Stones

Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, shipped as single-piece foam box and certified IGI report.

Twenty days is realistic for a new loose Stone when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, and at USD 3-118 for 50 pieces that is the number the buyer signs.

The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, which is USD 3-118 on the Made to Order schedule.

Loose Stones setting and finish detail on a HOLYCOME factory sample
Step 03

What Fails First on loose Stones

mixed color lots

Mixing near-colorless and G-H stones in one parcel produces a finished piece with a visible tonal step. Parcels ship by single lot, on a 50-piece Made to Order order at USD 3-118.

The commercial effect is replacement stones plus a sorting delay on the buyer's line. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, on a 50-piece Made to Order order at USD 3-118.

girdle damage

Stones packed loose in a bag chip each other in transit. Individually wrapped parcels cost more and arrive usable, certified IGI report and packed single-piece foam box at 50 pieces.

Our countermeasure is a gauge and a written limit. It adds about 6 seconds per piece and removes the defect from the run rather than from the carton, which the Made to Order file records at USD 3-118 in single-piece foam box.

sieve drift

A parcel sold as 2.0-2.2 mm with 15% of stones at 1.9 mm changes the setting labor on the buyer's bench. Sieve the parcel, do not sample it, which is USD 3-118 on the Made to Order schedule.

In a 50-piece run this typically shows on 11 of pieces. Catching it means measuring size distribution within the declared sieve at the tray level, not inspecting the finished carton, and the Made to Order quote for it sits at USD 3-118.

Step 04

The Measurements Behind a USD 3-118 Quote

Specification is the only part of a loose Stones quote that survives the season. These four measurements are what we write into the single-piece foam box paperwork, with IGI report and single-piece foam box stated on the same sheet.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

Every line above is measurable with a gauge and a scale. At USD 3-118 per piece, a supplier who cannot state them is selling a photo.

Step 05

MOQ, Samples and the Balance

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, on a 50-piece Made to Order order at USD 3-118.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 3-118 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, the figure being USD 3-118 for a 50-piece run.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of size distribution within the declared sieve for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, shipped as single-piece foam box and certified IGI report.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and the Made to Order quote for it sits at USD 3-118.

Step 06

What a USD 3-118 Quote Hides

The 50-piece Made to Order price splits as below. The line that decides season two is the plating and QC share, not the metal, quoted at USD 3-118 per piece in single-piece foam box.

Cost lineShareWhat moves it
Base metal or alloy for loose Stones34%Alloy choice and casting yield
Stone or melee for loose Stones25%Sieve range and lot batching
Setting and finishing labor for loose Stones22%Jig design and bench minutes
Plating, polish and QC for loose Stones15%Per-tray versus per-piece checks
Packaging for loose Stones4%single-piece foam box

Five lines, one price. If the supplier will not break them out, the number being compared is not a loose Stones price, shipped as single-piece foam box and certified IGI report, priced at USD 3-118 for the 50-piece Made to Order run.

Step 07

Carton Cube, Duty and the Freight Line That Surprises Buyers

On loose Stones, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, certified IGI report and packed single-piece foam box at 50 pieces.

Three numbers decide it for loose Stones: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, which is USD 3-118 on the Made to Order schedule.

We send a one-page sheet with every loose Stones quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, which the Made to Order file records at USD 3-118 in single-piece foam box.

Step 08

Alloy, Karat and the Cost of a Color Change

Buyers in US wholesale tend to over-index on unit price for loose Stones and under-index on what happens after delivery, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.

There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on loose Stones and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, certified IGI report and packed single-piece foam box at 50 pieces.

We would rather lose a first order of loose Stones on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, which the Made to Order file records at USD 3-118 in single-piece foam box.

Step 09

A 50-Piece Test Run

The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, and the Made to Order quote for it sits at USD 3-118.

Put the reject rule in writing before the deposit. The Made to Order conversation after arrival is shorter when the rule is on the order already, which is USD 3-118 on the Made to Order schedule.

Step 10

The Dock Check on loose Stones

We ship from Guangzhou or Shenzhen, and the port choice follows the carrier rate rather than a fixed habit, on a 50-piece Made to Order order at USD 3-118.

DDP suits a first Made to Order order because the duty invoice arrives after the carton clears, and that is the line buyers forget to budget, certified IGI report and packed single-piece foam box at 50 pieces.

The arrival check is three steps and none needs a lab: count against the packing list, weigh a sample, measure ten pieces, priced at USD 3-118 for the 50-piece Made to Order run.

Step 11

From Spec to single-piece foam box

Our process is deliberately boring, because boring is what survives a bulk run with several sets of hands on it, and at USD 3-118 for 50 pieces that is the number the buyer signs.

  1. Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
  2. Cut the model in wax or resin and photograph it on the gauge before metal is committed.
  3. Cast the first article, set the stones and finish it exactly as bulk will be finished.
  4. Send the first article for approval with the weight and the stone measurements stated.
  5. Run the balance of the order in 25-30 days, holding the approved article as the reference.
  6. Ship with the approved article photographed beside a production piece from the same tray.

A first order at 50 pieces per design is a measurement rather than a purchase. It tells you what size distribution within the declared sieve and zero girdle chips on arrival looks like from this line, which is USD 3-118 on the Made to Order schedule.

Step 12

Frequently Asked Questions

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which the Made to Order file records at USD 3-118 in single-piece foam box.

How long does a reorder of the same loose Stone take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, priced at USD 3-118 for the 50-piece Made to Order run.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white loose Stones, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is how the Made to Order account reads it at USD 3-118.

How is loose Stones packed for single-piece foam box?

Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, shipped as single-piece foam box and certified IGI report.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which the Made to Order file records at USD 3-118 in single-piece foam box.

Step 13

Next Step

Send a photo or a drawing of the piece you want in single-piece foam box, and the reply carries a price, a calendar and the four measurements, and the Made to Order quote for it sits at USD 3-118.

The factory behind loose Stones here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 133 7744 7107 on WhatsApp, certified IGI report and packed single-piece foam box at 50 pieces.

Related reading: Loose Stones Private Label Carton: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME Engagement Rings Q4 Holiday Stock: What the Quote Actually Covers - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .