Factory-direct bridal jewelry, shipped to the USA

Earrings

Earrings Vermeil Upgrade: Carton Cube, Duty and the Freight Line That Surprises Buyer

9 November 2026 · 11 min

Step 01

Vermeil and Gold Plating Specs for earrings

Vermeil means a gold layer of at least 2.5 microns over sterling silver, and the US market reads that number as a material claim rather than a finish note. Below 2.5 microns the piece is gold-plated, not vermeil, and the word cannot be used, which is how the Vermeil Upgrade account reads it at USD 60-336.

We run 3 microns on earrings for accounts that publish the claim, with a palladium strike layer so wear-through reads white and not yellow. Thickness is logged per lot and appears on the GRA report batch sheet, and at USD 60-336 for 100 pieces that is the number the buyer signs.

Earrings wholesale piece from the HOLYCOME line in Wuzhou

The cost difference is real: the USD 60-336 band moves up roughly sixty percent against rhodium-finished silver, and the retail price has to carry that or the margin disappears in the second season when the plating shows wear.

Step 02

Why the Vermeil Upgrade Quote Looks Cheap Until It Lands

In July, a US buyer of earrings ordered 100 earrings and asked for the same lost-wax cast as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, certified GRA report and packed retail box with care card at 100 pieces.

In the Vermeil Upgrade file the failure was already written down. Prong geometry sat in the buyer's own incoming report from the previous season and nobody carried it forward, so the same line failed twice, which is how the Vermeil Upgrade account reads it at USD 60-336.

The second run shipped retail box with care card with the spec stapled to the packing list. Zero rejects on arrival, and the buyer's own bench stopped re-inspecting, priced at USD 60-336 for the 100-piece Vermeil Upgrade run.

Earrings setting and finish detail on a HOLYCOME factory sample
Step 03

What Fails First on earrings

prong geometry

A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, on a 100-piece Vermeil Upgrade order at USD 60-336.

Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, priced at USD 60-336 for the 100-piece Vermeil Upgrade run.

rhodium burn-off

A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, shipped as retail box with care card and certified GRA report.

In a 100-piece run this typically shows on 17 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, which is USD 60-336 on the Vermeil Upgrade schedule.

size-step drift

A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, which the Vermeil Upgrade file records at USD 60-336 in retail box with care card.

The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and at USD 60-336 for 100 pieces that is the number the buyer signs.

Step 04

What a USD 60-336 Quote Hides

The 100-piece Vermeil Upgrade price splits as below. The line that decides season two is the plating and QC share, not the metal, with GRA report and retail box with care card stated on the same sheet.

Cost lineShareWhat moves it
Base metal or alloy for earrings34%Alloy choice and casting yield
Stone or melee for earrings25%Sieve range and lot batching
Setting and finishing labor for earrings22%Jig design and bench minutes
Plating, polish and QC for earrings15%Per-tray versus per-piece checks
Packaging for earrings4%retail box with care card

Five lines, one price. If the supplier will not break them out, the number being compared is not a earrings price, which is USD 60-336 on the Vermeil Upgrade schedule.

Step 05

The Measurements Behind a USD 60-336 Quote

Specification is the only part of a earrings quote that survives the season. These four measurements are what we write into the retail box with care card paperwork, and the Vermeil Upgrade quote for it sits at USD 60-336.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Plating thicknessNominal only0.20 micron rhodium logged per lot, 3 microns on vermeilWear-through inside one season
Surface porosity after polishSeen after platingCast porosity checked before plating, rejects pulled at that stagePlating blister six weeks later
Stone color consistencyGraded by eye under D65Color matched to a retained master stone, per trayRepeat color complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost

Every line above is measurable with a gauge and a scale. At USD 60-336 per piece, a supplier who cannot state them is selling a photo.

Step 06

MOQ, Samples and the Balance

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Vermeil Upgrade order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, with GRA report and retail box with care card stated on the same sheet.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 60-336 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the retail box with care card format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, with GRA report and retail box with care card stated on the same sheet.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, priced at USD 60-336 for the 100-piece Vermeil Upgrade run.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is how the Vermeil Upgrade account reads it at USD 60-336.

Step 07

What a Report Proves and What It Does Not

For earrings at this price band, the honest answer is a range rather than a point, and the range has a reason, which the Vermeil Upgrade file records at USD 60-336 in retail box with care card.

We run this check per tray rather than per carton because the defect that matters on earrings is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, on a 100-piece Vermeil Upgrade order at USD 60-336.

The report the buyer receives states the count per tray, the measured average and the outlier count for earrings. It is deliberately unglamorous, and it is the document that settles most disputes before they start, quoted at USD 60-336 per piece in retail box with care card.

Step 08

The Sample Approval That Survives Production

Most quotes for earrings describe the product and skip the part that decides whether the buyer makes money, the figure being USD 60-336 for a 100-piece run.

The buyers who get the most out of earrings treat the first order as a measurement, not as a purchase. They buy a small run, measure the four numbers that matter, and then commit, and at USD 60-336 for 100 pieces that is the number the buyer signs.

We support it directly on earrings: a 50-piece test run per design, the same gauge standard as a bulk order, and the same retained tray. Small does not have to mean loose, which the Vermeil Upgrade file records at USD 60-336 in retail box with care card.

Step 09

The Dock Check on earrings

We ship from Guangzhou or Shenzhen, and the port choice follows the carrier rate rather than a fixed habit, priced at USD 60-336 for the 100-piece Vermeil Upgrade run.

DDP suits a first Vermeil Upgrade order because the duty invoice arrives after the carton clears, and that is the line buyers forget to budget, quoted at USD 60-336 per piece in retail box with care card.

The arrival check is three steps and none needs a lab: count against the packing list, weigh a sample, measure ten pieces, and 100 pieces leaves Wuzhou in retail box with care card at USD 60-336.

Step 10

From Spec to retail box with care card

Our process is deliberately boring, because boring is what survives a bulk run with several sets of hands on it, on a 100-piece Vermeil Upgrade order at USD 60-336.

  1. Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
  2. Cut the model in wax or resin and photograph it on the gauge before metal is committed.
  3. Cast the first article, set the stones and finish it exactly as bulk will be finished.
  4. Send the first article for approval with the weight and the stone measurements stated.
  5. Run the balance of the order in 25-30 days, holding the approved article as the reference.
  6. Ship with the approved article photographed beside a production piece from the same tray.

A first order at 50 pieces per design is a measurement rather than a purchase. It tells you what stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm looks like from this line, with GRA report and retail box with care card stated on the same sheet, the figure being USD 60-336 for a 100-piece run.

Step 11

A 100-Piece Test Run

The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, which is how the Vermeil Upgrade account reads it at USD 60-336.

Put the reject rule in writing before the deposit. The Vermeil Upgrade conversation after arrival is shorter when the rule is on the order already, priced at USD 60-336 for the 100-piece Vermeil Upgrade run.

Step 12

Frequently Asked Questions

How long does a reorder of the same earring take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and 100 pieces leaves Wuzhou in retail box with care card at USD 60-336.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white earrings, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, priced at USD 60-336 for the 100-piece Vermeil Upgrade run.

How is earrings packed for retail box with care card?

Every unit goes into a foam-backed pouch, then the retail box with care card, then the outer carton at 100 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, and the Vermeil Upgrade quote for it sits at USD 60-336.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, certified GRA report and packed retail box with care card at 100 pieces.

How long does a reorder of the same earring take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and 100 pieces leaves Wuzhou in retail box with care card at USD 60-336.

Step 13

Next Step

Send a photo or a drawing of the piece you want in retail box with care card, and the reply carries a price, a calendar and the four measurements, which is how the Vermeil Upgrade account reads it at USD 60-336.

The factory behind earrings here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 133 7744 7107 on WhatsApp, and 100 pieces leaves Wuzhou in retail box with care card at USD 60-336.

Related reading: Earrings Amazon FBA Ready: Alloy, Karat and the Cost of a Color Change - HOLYCOME Earrings Made to Order: Sample to Container: The Real Calendar - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .