Factory-direct bridal jewelry, shipped to the USA

Earrings

Earrings Amazon FBA Ready: Alloy, Karat and the Cost of a Color Change

9 November 2026 · 11 min

Step 01

Why the Amazon FBA Ready Quote Looks Cheap Until It Lands

Two buyers ordered the same earring in the same month. One paid 9% less and absorbed 23 rejects out of 200 pieces; the other paid our quote and shipped clean. The difference was prong geometry, and it was measurable on both benches, and the Amazon FBA Ready quote for it sits at USD 38-210.

The defect did not surprise us. Prong geometry is the predictable output of a run where nobody wrote the tolerance down, and it is the first measurement we take on an incoming earring, and the Amazon FBA Ready quote for it sits at USD 38-210.

Earrings wholesale piece from the HOLYCOME line in Wuzhou

We did not discount the quote. We changed the gauge, the seat cut, the plating log and the tray rule, and the second run shipped with zero rejects on stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 38-210.

Step 02

The Measurements Behind a USD 38-210 Quote

Price is the first thing compared and the last thing that matters. These four measurements decide the return rate on earrings, and three of them cost nothing to specify, which is how the Amazon FBA Ready account reads it at USD 38-210.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Stone color consistencyGraded by eye under D65Color matched to a retained master stone, per trayRepeat color complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement

Each line is a gauge, not a slogan. A supplier who cannot quote a number for prong geometry is quoting an opinion about earrings, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.

Step 03

What a USD 38-210 Quote Hides

The Amazon FBA Ready price of 200 pieces splits as below. The line buyers challenge is labor, and it is the line that decides the second season, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces.

Earrings setting and finish detail on a HOLYCOME factory sample
Cost lineShareWhat moves it
Base metal or alloy for earrings34%Alloy choice and casting yield
Stone or melee for earrings25%Sieve range and lot batching
Setting and finishing labor for earrings22%Jig design and bench minutes
Plating, polish and QC for earrings15%Per-tray versus per-piece checks
Packaging for earrings4%retail-ready box with FNSKU label

Break the USD 38-210 quote into these five lines and the comparison stops being rhetorical.

Step 04

What Fails First on earrings

prong geometry

A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, the figure being USD 38-210 for a 200-piece run.

In a 200-piece run this typically shows on 11 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, on a 200-piece Amazon FBA Ready order at USD 38-210.

rhodium burn-off

A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.

The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, quoted at USD 38-210 per piece in retail-ready box with FNSKU label.

size-step drift

A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, priced at USD 38-210 for the 200-piece Amazon FBA Ready run.

Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, and at USD 38-210 for 200 pieces that is the number the buyer signs.

Step 05

Listing earrings on Amazon FBA Without a Takedown

Amazon treats jewelry as a category where the packaging is part of the compliance file, not an afterthought. A poly bag with an opening of five inches or more needs the suffocation warning printed on it, and every unit needs an FNSKU label that covers the manufacturer barcode rather than sits beside it, and the Amazon FBA Ready quote for it sits at USD 38-210.

For earrings the practical constraint is that a unit must survive a bin with other units and still read clean at unboxing. We pack each piece in a foam-backed pouch, then the retail box, then the FNSKU on the outside of the pouch, so a warehouse scan never touches the box the customer sees, shipped as retail-ready box with FNSKU label and certified GRA report.

Weight and dimension limits decide your freight per unit more than the piece cost does. A single earring in its retail box normally lands under eight ounces, which keeps it in the small standard tier. Anything above that moves a tier and eats the margin you built into the USD 38-210 quote.

Step 06

MOQ, Samples and the Balance

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Amazon FBA Ready order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 38-210.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 38-210 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the retail-ready box with FNSKU label format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, shipped as retail-ready box with FNSKU label and certified GRA report.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and at USD 38-210 for 200 pieces that is the number the buyer signs.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, with GRA report and retail-ready box with FNSKU label stated on the same sheet.

Step 07

The Sample Approval That Survives Production

This is where earrings stops being a commodity and starts being a supply relationship, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.

At 200 pieces the arithmetic on earrings changes: the fixed costs spread, the variable costs do not. That is why the second order prices better than the first even when the gold fix has moved up, quoted at USD 38-210 per piece in retail-ready box with FNSKU label.

We quote both a first-run price and a reorder price for earrings on the same sheet so the buyer can see where the curve flattens. Most flatten by the third run, on a 200-piece Amazon FBA Ready order at USD 38-210.

Step 08

How the Second Order Becomes Cheaper

The figure below is what we quote for earrings, and it is deliberately narrower than the market average, with GRA report and retail-ready box with FNSKU label stated on the same sheet.

Buyers who get this wrong on earrings usually get it wrong in the first order and correct it in the second. The cost of that correction is rarely the money; it is the four to six weeks of shelf time lost while a replacement run of earrings is scheduled behind other orders, and the Amazon FBA Ready quote for it sits at USD 38-210.

Our approach is to write the rule into the earrings spec sheet before casting, then test it on the first tray. A rule that only exists in an email is not a rule, and a rule that is not tested is a hope, and the Amazon FBA Ready quote for it sits at USD 38-210.

Step 09

From Spec to retail-ready box with FNSKU label

On 200 pieces of earrings the calendar starts at the signed spec, not at the deposit, and it ends with retail-ready box with FNSKU label on a pallet, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

A 50-piece first order at USD 38-210 is a measurement of stone retention after a 40-cycle wear test, not a commitment to the range.

Step 10

A 200-Piece Test Run

A test run at 50 pieces tells you three things: whether prong geometry is controlled, whether packing survives freight, and whether the count is honest, with GRA report and retail-ready box with FNSKU label stated on the same sheet, quoted at USD 38-210 per piece in retail-ready box with FNSKU label.

Put the reject rule in writing before the deposit. The Amazon FBA Ready conversation after arrival is shorter when the rule is already on the order, and at USD 38-210 for 200 pieces that is the number the buyer signs.

Step 11

The Dock Check on earrings

Air lands in 5-8 days to the US west coast and sea takes three times the transit. At USD 38-210 per piece the choice is a cash-flow decision.

DDP is available for US accounts that want duty and clearance on our side, and it removes the invoice that arrives after the carton clears, which is USD 38-210 on the Amazon FBA Ready schedule.

On arrival, weigh a tray and measure ten pieces. Anything outside the band is a claim with evidence rather than a difference of opinion, on a 200-piece Amazon FBA Ready order at USD 38-210.

Step 12

Frequently Asked Questions

What is the minimum order for earrings?

50 pieces per earring. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which is USD 38-210 on the Amazon FBA Ready schedule.

Do you supply certificates for earrings?

GRA report on earrings above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of stone retention after a 40-cycle wear test, which is what a counter or a listing actually needs, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if prong geometry shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and the Amazon FBA Ready quote for it sits at USD 38-210.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, and the Amazon FBA Ready quote for it sits at USD 38-210.

What is the minimum order for earrings?

50 pieces per earring. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which is USD 38-210 on the Amazon FBA Ready schedule.

Step 13

Next Step

Send a photo or a drawing of the piece you want in retail-ready box with FNSKU label. We answer with a price, a calendar and the four measurements above, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces.

The factory behind earrings here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 133 7744 7107 on WhatsApp, on a 200-piece Amazon FBA Ready order at USD 38-210.

Related reading: Earrings Shopify DTC: What a Report Proves and What It Does Not - HOLYCOME Earrings Private Label Carton: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .