Factory-direct bridal jewelry, shipped to the USA

Earrings

Earrings Private Label Carton: AQL, Tray Checks and What a QC Report Should Say

9 November 2026 · 11 min

Step 01

Why the Private Label Carton Quote Looks Cheap Until It Lands

In August, a US buyer of earrings ordered 200 earrings and asked for the same lost-wax cast as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, shipped as private-label carton with hangtag and certified GRA report.

In the Private Label Carton file the failure was already written down. Prong geometry sat in the buyer's own incoming report from the previous season and nobody carried it forward, so the same line failed twice, on a 200-piece Private Label Carton order at USD 45-252.

Earrings wholesale piece from the HOLYCOME line in Wuzhou

The second run shipped private-label carton with hangtag with the spec stapled to the packing list. Zero rejects on arrival, and the buyer's own bench stopped re-inspecting, which is how the Private Label Carton account reads it at USD 45-252.

Step 02

The Measurements Behind a USD 45-252 Quote

Specification is the only part of a earrings quote that survives the season. These four measurements are what we write into the private-label carton with hangtag paperwork, priced at USD 45-252 for the 200-piece Private Label Carton run.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Stone color consistencyGraded by eye under D65Color matched to a retained master stone, per trayRepeat color complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement

Every line above is measurable with a gauge and a scale. At USD 45-252 per piece, a supplier who cannot state them is selling a photo.

Step 03

Private Label Packaging for earrings

Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, and at USD 45-252 for 200 pieces that is the number the buyer signs.

Earrings setting and finish detail on a HOLYCOME factory sample

The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin earring. Below 0.8 mm of shank width we recommend the hangtag only, priced at USD 45-252 for the 200-piece Private Label Carton run.

Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, with GRA report and private-label carton with hangtag stated on the same sheet.

Step 04

What a USD 45-252 Quote Hides

The 200-piece Private Label Carton price splits as below. The line that decides season two is the plating and QC share, not the metal, priced at USD 45-252 for the 200-piece Private Label Carton run.

Cost lineShareWhat moves it
Base metal or alloy for earrings34%Alloy choice and casting yield
Stone or melee for earrings25%Sieve range and lot batching
Setting and finishing labor for earrings22%Jig design and bench minutes
Plating, polish and QC for earrings15%Per-tray versus per-piece checks
Packaging for earrings4%private-label carton with hangtag

Five lines, one price. If the supplier will not break them out, the number being compared is not a earrings price, shipped as private-label carton with hangtag and certified GRA report, which is USD 45-252 on the Private Label Carton schedule.

Step 05

What Fails First on earrings

size-step drift

A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 45-252.

Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, on a 200-piece Private Label Carton order at USD 45-252.

prong geometry

A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, and at USD 45-252 for 200 pieces that is the number the buyer signs.

In a 200-piece run this typically shows on 17 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, which is how the Private Label Carton account reads it at USD 45-252.

rhodium burn-off

A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, certified GRA report and packed private-label carton with hangtag at 200 pieces.

The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, the figure being USD 45-252 for a 200-piece run.

Step 06

MOQ, Samples and the Balance

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which the Private Label Carton file records at USD 45-252 in private-label carton with hangtag.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 45-252 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and at USD 45-252 for 200 pieces that is the number the buyer signs.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, on a 200-piece Private Label Carton order at USD 45-252.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and the Private Label Carton quote for it sits at USD 45-252.

Step 07

Alloy, Karat and the Cost of a Color Change

For earrings at this price band, the honest answer is a range rather than a point, and the range has a reason, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 45-252.

The commercial version of this question for earrings is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 45-252.

That clause matters more than a discount on earrings. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 45-252.

Step 08

What a Report Proves and What It Does Not

Most quotes for earrings describe the product and skip the part that decides whether the buyer makes money, quoted at USD 45-252 per piece in private-label carton with hangtag.

We run this check per tray rather than per carton because the defect that matters on earrings is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, and at USD 45-252 for 200 pieces that is the number the buyer signs.

The report the buyer receives states the count per tray, the measured average and the outlier count for earrings. It is deliberately unglamorous, and it is the document that settles most disputes before they start, which is how the Private Label Carton account reads it at USD 45-252.

Step 09

From Spec to private-label carton with hangtag

Our process is deliberately boring, because boring is what survives a bulk run with several sets of hands on it, and at USD 45-252 for 200 pieces that is the number the buyer signs.

  1. Agree the stamp position, the hangtag copy and the box print before the first carton.
  2. Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
  3. Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
  4. Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
  5. Hold a retained carton as the pack reference for every reorder.

A first order at 50 pieces per design is a measurement rather than a purchase. It tells you what stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm looks like from this line, which is USD 45-252 on the Private Label Carton schedule.

Step 10

A 200-Piece Test Run

The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, and the Private Label Carton quote for it sits at USD 45-252.

Put the reject rule in writing before the deposit. The Private Label Carton conversation after arrival is shorter when the rule is on the order already, priced at USD 45-252 for the 200-piece Private Label Carton run.

Step 11

The Dock Check on earrings

We ship from Guangzhou or Shenzhen, and the port choice follows the carrier rate rather than a fixed habit, on a 200-piece Private Label Carton order at USD 45-252.

DDP suits a first Private Label Carton order because the duty invoice arrives after the carton clears, and that is the line buyers forget to budget, shipped as private-label carton with hangtag and certified GRA report.

The arrival check is three steps and none needs a lab: count against the packing list, weigh a sample, measure ten pieces, priced at USD 45-252 for the 200-piece Private Label Carton run.

Step 12

Frequently Asked Questions

What is the minimum order for earrings?

50 pieces per earring. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, with GRA report and private-label carton with hangtag stated on the same sheet.

Do you supply certificates for earrings?

GRA report on earrings above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of stone retention after a 40-cycle wear test, which is what a counter or a listing actually needs, shipped as private-label carton with hangtag and certified GRA report.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if prong geometry shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, which is how the Private Label Carton account reads it at USD 45-252.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, which is how the Private Label Carton account reads it at USD 45-252.

What is the minimum order for earrings?

50 pieces per earring. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, with GRA report and private-label carton with hangtag stated on the same sheet.

Step 13

Next Step

Send a photo or a drawing of the piece you want in private-label carton with hangtag, and the reply carries a price, a calendar and the four measurements, with GRA report and private-label carton with hangtag stated on the same sheet.

The factory behind earrings here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 133 7744 7107 on WhatsApp, priced at USD 45-252 for the 200-piece Private Label Carton run.

Related reading: Bracelets & Bangles Vermeil Upgrade: Carton Cube, Duty and the Freight Line That Surp - HOLYCOME Bracelets & Bangles Valentine Program: MOQ, Mixed Designs and the Real First Order - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .