Factory-direct bridal jewelry, shipped to the USA

Bracelets & Bangles

Bracelets & Bangles Private Label Carton: AQL, Tray Checks and What a QC Report Shoul

9 November 2026 · 11 min

Step 01

AQL, Tray Checks and What a QC Report Should Say in the Private Label Carton Program

A US buyer of bracelets and Bangles came to us after 200 bracelets and Bangles from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: clasp torsion failure had drifted far enough that the buyer's own bench could not correct it without recutting, which is USD 40-264 on the Private Label Carton schedule.

That rejection was avoidable at the drawing stage. Clasp torsion failure belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival, with GRA report and private-label carton with hangtag stated on the same sheet, and the Private Label Carton quote for it sits at USD 40-264.

Bracelets & Bangles wholesale piece from the HOLYCOME line in Wuzhou

We kept the Private Label Carton price and changed the four measurements that matter. The rebuild cost about 20 seconds per piece and removed the whole claim conversation, the figure being USD 40-264 for a 200-piece run.

Step 02

Four Spec Lines a Private Label Carton Buyer Checks

The Private Label Carton buyer signs on four numbers. The table puts the trade default beside our standard so the difference is visible before the deposit, with GRA report and private-label carton with hangtag stated on the same sheet.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Stone color consistencyGraded by eye under D65Color matched to a retained master stone, per trayRepeat color complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement

None of the four adds cost at USD 40-264. They add about 20 seconds per piece and remove the reason to inspect twice.

Step 03

Private Label Packaging for bracelets and Bangles

Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, quoted at USD 40-264 per piece in private-label carton with hangtag.

Bracelets & Bangles setting and finish detail on a HOLYCOME factory sample

The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin bracelets and Bangle. Below 0.8 mm of shank width we recommend the hangtag only, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 40-264.

Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, shipped as private-label carton with hangtag and certified GRA report.

Step 04

Cost Split on a Private Label Carton Piece at USD 40-264

At USD 40-264 per piece for bracelets and Bangles, the stone sits near a quarter and the labor line moves by double digits between two quotes for one drawing.

Cost lineShareWhat moves it
Base metal or alloy for bracelets and Bangles32%Alloy choice and casting yield
Stone or melee for bracelets and Bangles23%Sieve range and lot batching
Setting and finishing labor for bracelets and Bangles21%Jig design and bench minutes
Plating, polish and QC for bracelets and Bangles14%Per-tray versus per-piece checks
Packaging for bracelets and Bangles10%private-label carton with hangtag

The saving in the cheapest quote hides in plating and stone grade. At 200 pieces that saving is visible in season two, and the Private Label Carton quote for it sits at USD 40-264.

Step 05

Three Failures That Reach the Private Label Carton Bench

length drift on bangles

A bangle that measures 6.9 inch instead of 7.0 slides differently on the wrist. Oval versus round form changes the fit even at the same number, on a 200-piece Private Label Carton order at USD 40-264.

The commercial effect is clasp replacement plus reship, typically USD 9-15 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and at USD 40-264 for 200 pieces that is the number the buyer signs.

clasp torsion failure

A box clasp rated for a necklace fails under wrist rotation. The clasp has to be tested in torsion, not only in pull, the figure being USD 40-264 for a 200-piece run.

Our countermeasure is a gauge and a written limit. It adds about 20 seconds per piece and removes the defect from the run rather than from the carton, which the Private Label Carton file records at USD 40-264 in private-label carton with hangtag.

link gap growth

Gaps between links grow when the connecting pin is 0.05 mm under size. A pin gauge on every tenth piece catches it cheaply, which is how the Private Label Carton account reads it at USD 40-264.

In a 200-piece run this typically shows on 17 of pieces. Catching it means measuring clasp torsion resistance at the tray level, not inspecting the finished carton, the figure being USD 40-264 for a 200-piece run.

Step 06

Terms Behind a Private Label Carton Order

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, priced at USD 40-264 for the 200-piece Private Label Carton run.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 40-264 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, quoted at USD 40-264 per piece in private-label carton with hangtag.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of clasp torsion resistance for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is USD 40-264 on the Private Label Carton schedule.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is USD 40-264 on the Private Label Carton schedule.

Step 07

Alloy, Karat and the Cost of a Color Change

This is where bracelets and Bangles stops being a commodity and starts being a supply relationship, quoted at USD 40-264 per piece in private-label carton with hangtag.

The commercial version of this question for bracelets and Bangles is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, quoted at USD 40-264 per piece in private-label carton with hangtag.

That clause matters more than a discount on bracelets and Bangles. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, shipped as private-label carton with hangtag and certified GRA report.

Step 08

What a Report Proves and What It Does Not

The figure below is what we quote for bracelets and Bangles, and it is deliberately narrower than the market average, and at USD 40-264 for 200 pieces that is the number the buyer signs.

We run this check per tray rather than per carton because the defect that matters on bracelets and Bangles is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, and at USD 40-264 for 200 pieces that is the number the buyer signs.

The report the buyer receives states the count per tray, the measured average and the outlier count for bracelets and Bangles. It is deliberately unglamorous, and it is the document that settles most disputes before they start, which the Private Label Carton file records at USD 40-264 in private-label carton with hangtag.

Step 09

The Calendar Behind a Private Label Carton Run

Nothing in this sequence is clever. Each step exists because skipping it cost somebody a claim on bracelets and Bangles at USD 40-264.

  1. Agree the stamp position, the hangtag copy and the box print before the first carton.
  2. Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
  3. Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
  4. Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
  5. Hold a retained carton as the pack reference for every reorder.

MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable, certified GRA report and packed private-label carton with hangtag at 200 pieces, which is USD 40-264 on the Private Label Carton schedule.

Step 10

The First Private Label Carton Order

Start with three designs at 50 pieces each. That covers the 200 pieces you need to read sell-through without betting on one model, certified GRA report and packed private-label carton with hangtag at 200 pieces.

Sample 3-5 days, bulk 15-20 days under 500 pieces, 200 pieces inside that window. The calendar is the same on every Private Label Carton run, quoted at USD 40-264 per piece in private-label carton with hangtag.

Step 11

Getting private-label carton with hangtag to US e-commerce

Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in US e-commerce, the figure being USD 40-264 for a 200-piece run.

FOB is the default and DDP is the option. Buyers new to US e-commerce usually take DDP once and then switch after they see the breakdown, shipped as private-label carton with hangtag and certified GRA report, with GRA report and private-label carton with hangtag stated on the same sheet.

At receiving, count cartons, weigh one tray and measure ten pieces against clasp torsion resistance. Twenty minutes here saves a season of returns, and at USD 40-264 for 200 pieces that is the number the buyer signs.

Step 12

Frequently Asked Questions

What is the minimum order for bracelets and Bangles?

50 pieces per bracelets and Bangle. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which is how the Private Label Carton account reads it at USD 40-264.

Do you supply certificates for bracelets and Bangles?

GRA report on bracelets and Bangles above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of clasp torsion resistance, which is what a counter or a listing actually needs, and the Private Label Carton quote for it sits at USD 40-264.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if clasp torsion failure shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and at USD 40-264 for 200 pieces that is the number the buyer signs.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, with GRA report and private-label carton with hangtag stated on the same sheet.

What is the minimum order for bracelets and Bangles?

50 pieces per bracelets and Bangle. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which is how the Private Label Carton account reads it at USD 40-264.

Step 13

Next Step

If the USD 40-264 band fits the shelf, send a drawing and we quote the 200-piece Private Label Carton run inside one business day.

HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across bracelets and Bangles and adjacent categories. service@holycome.com or WhatsApp +86 133 7744 7107, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 40-264.

Related reading: Loose Stones Vermeil Upgrade: Carton Cube, Duty and the Freight Line That Surprises B - HOLYCOME Loose Stones Valentine Program: MOQ, Mixed Designs and the Real First Order - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .