Factory-direct bridal jewelry, shipped to the USA

Wedding Rings & Bands

The Wedding Rings & Bands Custom Brief That Survives CAD - GemWSL

17 November 2026 · 3 min

Every wedding rings & bands category tells you what the factory can repeat, if you read it in the right order.

Step 01

Most custom briefs die in the first render

A brief that says the design should feel delicate gives the CAD team nothing to measure. The range holds 31 designs in this category.

A brief that survives has numbers, priorities, and one named reference per dimension.

solid gold carries 45% of the designs, which is why a metal change is a scheduling question and not a design question.

The metal split is narrow on purpose: solid gold at 45% keeps the quote cycle short for most reorders.

Step 02

What the brief has to pin down

ItemWhat to specifyWhy it matters
Base metalsolid gold or an alternativeSets the budget and the finish path
Stonemoissanite, size and countDrives the setting and the price
ProportionsShank width, setting height in mmThe two numbers that decide comfort
Size rangeSmallest and largest to be quotedAvoids a re-quote after approval

Moissanite is the dominant stone at 56%; lab grown diamond makes up 38%.

The figure of 31 is worth reconciling against your own shortlist before the quote, because it sets how much of the buy can be stock.

Step 03

Priorities, not adjectives

Rank three things and say which one gives way if the render cannot hold all of them: stone security, setting height, or shank weight. A brief without a priority list gets a render that satisfies none of them.

Reference designs in the range include Plain Slim Wedding Band; Stackable Infinity Style Beaded Wedding Band 0.16ct; 1.5mm Moissanite Ring Round Brilliant Cut Wedding Ring D Color VVS1 S925 High-en.

moissanite accounts for 56% of the designs, so stone sourcing is already settled for most of the range.

Step 04

The approval loop

  • Approve the wireframe before the render
  • Check stone seating in the render, not the hero angle
  • Confirm dimensions in millimetres on the drawing
  • Sign off the metal and finish on a physical sample

Each step is cheaper than the one after it, which is why the order matters.

With 31 designs on file, the reorder path usually exists before the first order is placed.

At $17.6 median, the middle of the range is where most reorders land, and the two ends are sample territory.

Step 05

What to keep from the process

Keep the approved drawing, the spec sheet and the sample photos together. That file is what makes a reorder a reorder instead of a new project.

Quoted prices run from $17.6 to $120, with a median around $17.6.

The distance between $17.6 and $120 is the room a promotion has before the margin goes, so it is worth reading before a discount.

Step 06

Range snapshot: Wedding Rings & Bands by the numbers

Moissanite is the dominant stone at 56%; lab grown diamond makes up 38%.

DimensionReadingBuying note
Designs on file31Shortlist can come from stock patterns
Dominant metalsolid gold (45%)Quote cycle stays short
Dominant stonemoissanite (56%)Sourcing already settled
Quoted band$17.6 - $120Covers two price slots

Quoted prices run from $17.6 to $120, with a median around $17.6. Read the snapshot before the shortlist: a category that is narrow in metal but deep in cut behaves differently from one that is the other way round.

Step 07

Frequently Asked Questions

How long does a custom brief take to prepare?

An hour with the fields above is enough. Most delays come from missing dimensions, not from design debate.

Should the brief include a reference image?

One reference per dimension, clearly labelled as a reference rather than a copy target.

Can the factory change the design during CAD?

They can propose changes, but the priority list decides which proposals are acceptable.

What is the most expensive omission?

Setting height. It is the number that most often forces a rebuild after approval.

Does custom work need a separate MOQ?

Yes. Custom runs are quoted per order and usually carry a higher minimum than stock patterns.

If you want to work from the current range rather than from a catalog PDF, send the two price slots you sell and the size bands you stock. We will reply with the designs that fit, the build on each, and the reorder path. GemWSL keeps the full range in one place.

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .