Factory-direct bridal jewelry, shipped to the USA

Wedding Rings & Bands

Wedding Rings Bands Wholesale: First Order Landed Cost Math

18 November 2026 · 6 min

Step 01

Why your first wholesale order costs more than the quote

Most buyers I talk to come in with one number in their head: the unit price on the quote sheet. Then the invoice at the port is 30 to 45 percent higher and they want to know where it went. Nothing shady happened. They just never built the full landed cost before they signed.

I run pre-ship QC at HOLYCOME, so I see both sides of the file: what the factory charges and what the buyer actually pays to get rings onto their shelf. This piece walks through the arithmetic on a realistic first order of wedding rings and bands wholesale, line by line, so you can sanity-check any quote you receive, ours included.

One number up front, because it changes every line below: our cost, speed and yield run roughly 20% better than typical trading companies. The reason is boring and concrete. We cut and polish in-house, we buy rough and stones directly, and the person checking your stones is the same person who signs the pre-ship report. No intermediary layer, no re-inspection fee, no third-party markup stacked on the unit price.

Step 02

The sample order before the real order

Nobody sensible places 300 pieces on a first contact. You start with samples, and that cost belongs in your math too, because it is real money.

Our stock program has MOQ 1 pc, so you can pull single rings in specific sizes and finishes to check hand-feel, prong work and stone color in your own lighting. Custom builds start at 30 pcs per design. Samples go out with PayPal, which most first-time buyers prefer because it is fast and gives them a paper trail without touching a bank wire.

Budget the sample round honestly. If you test six designs at an average of 30 to 60 USD landed per piece, you are into it for a few hundred dollars before the bulk order exists. Treat that as a research line item, not a loss. The rings you reject at sample stage are the ones that would have cost you a 300-piece mistake.

Step 03

Building the landed cost, layer by layer

Here is the structure I would use if I were the buyer. Numbers below are illustrative for a mixed first order of 200 pieces, roughly 60 percent moissanite bands, 25 percent lab-grown diamond styles, 15 percent plain 925 silver bands.

Layer 1: the ex-works unit price

This is metal plus stones plus labor plus factory margin. For 925 silver with moissanite melee, most of your cost sits in the stones and the setting labor, not the silver. That surprises people. Silver is cheap by weight; a well-set pavé band is not.

Ask for the price broken into metal weight, stone grade and setting. A quote that is one lump sum tells you nothing and cannot be audited later.

Layer 2: certificates

Moissanite above a certain size ships with GRA cards. Lab-grown diamond goods carry IGI reports. Both are part of your cost and both matter at retail, because US and EU buyers increasingly expect documentation on the counter.

Do not accept a certificate printed after the fact for a stone that was never submitted. Ask for the report number and check it.

Layer 3: freight and duty

We ship DDP, delivery 5 to 8 days door to door, duty and clearance included in the rate you are quoted. That is a big deal for a first order because it removes the customs-broker surprise. If a supplier quotes you EXW or FOB and leaves duty to you, add it back in before you compare.

Layer 4: QC and the cost of defects

This is the line buyers forget. Our process is three stages: incoming stone check on arrival from the cutter, in-process inspection during setting and polishing, and a pre-ship AQL sample pull before packing. Defects caught in Guangdong cost you nothing. Defects caught in your warehouse cost you return freight, a customer email and a chargeback risk.

If a supplier cannot describe their QC stages in specific terms, price in a defect allowance of 3 to 5 percent and see whether their quote still looks cheap.

Layer 5: payment terms and cash cost

Bulk orders run on T/T 30% deposit, balance against the pre-ship inspection report. Samples run on PayPal. Your deposit is capital sitting idle for 12 to 18 days of production plus transit, so factor your own carrying cost if you are running tight.

Step 04

Worked example: 200-piece first order

Illustrative figures, USD, DDP to a US warehouse. Use the structure, not the numbers.

Cost lineBasisAmountPer ring
Ex-works goods200 pcs, mixed program4,60023.00
CertificatesGRA / IGI on applicable SKUs1800.90
Freight, DDP5-8 day door delivery3401.70
Defect allowance2% of goods, pre-ship AQL920.46
Total landedBefore your retail markup5,21226.06

So a ring quoted at 23.00 lands at about 26.06. That is a 13 percent lift, and most of it is freight and certificates, not padding. If your supplier's lift is running 35 percent or more, ask which line is doing the damage.

The quote is a starting point, not a cost. Until freight, certificates and defect risk are on the page, you do not know your margin.
Step 05

Where trading companies hide the extra 20%

This is the part I get asked about most, so let me be blunt about the mechanics rather than just claiming we are cheaper.

  • They buy finished rings from a factory and add a margin before you ever see a price.
  • They pay a third party to re-inspect, then bill that inspection back to you.
  • Stone sourcing goes through a broker, so melee grade drifts and nobody on their side can confirm it.
  • Freight is booked retail, not consolidated, so the DDP rate carries their spread.
  • Custom tooling gets quoted as a separate fee instead of being amortized across the run.

We cut the intermediary layer out because the same floor that sets the stones also checks them and packs them. That is where the 20% sits. It is not a discount, it is a removed cost.

Production runs 12 to 18 days on custom work. If someone promises 5 days on 300 custom bands, they are either stock-holding or guessing.

Step 06

What to verify before the deposit leaves

Run these checks on any supplier, and expect the answers in writing.

  • MOQ stated per line: stock versus custom, with the custom threshold named.
  • Production lead time in calendar days, not "about two weeks."
  • QC stages described, including whether pre-ship inspection is AQL-based.
  • Certificate bodies named, with report numbers traceable to the stone.
  • Incoterm confirmed, and whether duty is inside the quoted freight.
  • Payment split and what triggers the balance release.

If any of those come back vague, the landed cost is a guess and so is your margin.

Step 07

Frequently Asked Questions

What is the MOQ for a first wedding rings and bands wholesale order?

Stock designs start at MOQ 1 pc, so you can order singles to evaluate. Custom designs begin at 30 pcs per style, and that threshold covers tooling and setup.

How long does production and delivery take?

Custom production runs 12 to 18 days after deposit and artwork approval. DDP delivery adds 5 to 8 days to your door, with duty and clearance included in the quoted rate.

How is the price calculated, and what payment terms apply?

Pricing is built on metal weight, stone grade and setting labor, quoted per SKU rather than as a lump sum. Bulk orders use T/T 30% deposit with balance against the pre-ship report, and samples can be paid by PayPal.

Step 08

Send us your ring list and we will price it line by line

Send your SKU list, target quantities and destination country to service@holycome.com or WhatsApp +86 133 7744 7107, and we will return a cost breakdown with metal, stone, certificate, freight and QC shown separately, plus a sample plan if you want to test before committing. Ask for samples of two or three bands first if you would rather check the setting work in your own hands before the bulk order.

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .