Wedding Rings & Bands
Wedding Rings & Bands Distributor Tier: How the Second Order Becomes Cheaper
How the Second Order Becomes Cheaper
The brief was simple: 800 wedding Rings and Bands, 14K/18K gold, delivered before October. The run that arrived carried 17 pieces with flat bore, and the buyer spent USD 25-75 on sorting before the goods reached a shelf, on a 800-piece Distributor Tier order at USD 39-228.
Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and flat bore is what a photograph fails to define, and at USD 39-228 for 800 pieces that is the number the buyer signs.
The fix cost about 18 seconds per wedding Rings and Band and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, which is USD 39-228 on the Distributor Tier schedule.
Where USD 39-228 Per Piece Actually Goes
Cost per piece at USD 39-228 leaves little room for assumption. The table shows which line compresses and which one only moves quality.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for wedding Rings and Bands | 30% | Alloy choice and casting yield |
| Stone or melee for wedding Rings and Bands | 20% | Sieve range and lot batching |
| Setting and finishing labor for wedding Rings and Bands | 19% | Jig design and bench minutes |
| Plating, polish and QC for wedding Rings and Bands | 12% | Per-tray versus per-piece checks |
| Packaging for wedding Rings and Bands | 19% | bulk carton, 50 per bag |
A factory with no bench minutes per piece has never costed wedding Rings and Bands at USD 39-228. Ask for minutes and for the reject rule.
What US buyers Check Before They Sign
Four lines decide whether wedding Rings and Bands at USD 39-228 sells through or comes back, and none of them appears on a typical trading-company quote.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Put these four into the purchase order and the Distributor Tier argument after delivery becomes arithmetic, which is USD 39-228 on the Distributor Tier schedule.
Distributor Pricing Tiers on wedding Rings and Bands
A distributor does not buy a wedding Rings and Band, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, which the Distributor Tier file records at USD 39-228 in bulk carton, 50 per bag.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, priced at USD 39-228 for the 800-piece Distributor Tier run.
Turn is the number the distributor manages. At USD 39-228 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of wedding Rings and Bands move in 800-piece lots rather than in the 50-piece sample quantity.
The Three Failures We See Most in Incoming Samples
flat bore
A flat inside profile casts faster and reads as a sharp edge on a size 4.5 finger. Comfort radius is 40 seconds of finishing per band and it is the first thing skipped, the figure being USD 39-228 for a 800-piece run.
The commercial effect is resize labor plus a second freight leg, typically USD 11-18 per band. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which the Distributor Tier file records at USD 39-228 in bulk carton, 50 per bag.
width drift after polish
Polishing removes 0.04-0.10 mm from the outside face. A run that checks width before polish ships a band 0.08 mm narrower than the approved sample, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Our countermeasure is a gauge and a written limit. It adds about 18 seconds per piece and removes the defect from the run rather than from the carton, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
eternity sizing limits
A full-eternity band cannot be resized without resetting stones. Quoting it as a sizeable product is how a buyer absorbs a reset cost on the first exchange, and the Distributor Tier quote for it sits at USD 39-228.
In a 800-piece run this typically shows on 11 of pieces. Catching it means measuring width at the tray level, not inspecting the finished carton, and the Distributor Tier quote for it sits at USD 39-228.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and at USD 39-228 for 800 pieces that is the number the buyer signs.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 39-228 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of width for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and the Distributor Tier quote for it sits at USD 39-228.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, the figure being USD 39-228 for a 800-piece run.
What the Quote Actually Covers
Most quotes for wedding Rings and Bands describe the product and skip the part that decides whether the buyer makes money, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
One practical note on timing for wedding Rings and Bands: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, shipped as bulk carton, 50 per bag and certified SGS batch report.
We date the wedding Rings and Bands proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, which is how the Distributor Tier account reads it at USD 39-228.
MOQ, Mixed Designs and the Real First Order
This is the question that separates a trading company from a factory, and on wedding Rings and Bands the answer is usually shorter than buyers expect, quoted at USD 39-228 per piece in bulk carton, 50 per bag.
In the US market terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For wedding Rings and Bands, we publish the figure per SKU and hold it for the order window rather than for the calendar year, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Practically, it shows up in three places for wedding Rings and Bands: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, which is how the Distributor Tier account reads it at USD 39-228.
How a Repeat Order Gets Built
The sequence below is fixed for a Distributor Tier run. The dates move with the stone lot, not with the shipping season, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Distributor Tier shipment, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Freight, Duty and the Arrival Check
Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, which the Distributor Tier file records at USD 39-228 in bulk carton, 50 per bag.
For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, quoted at USD 39-228 per piece in bulk carton, 50 per bag.
Check the count, the weight and width and inside diameter consistency across a 200-piece run before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
What This Means for a First Order
A first Distributor Tier order of 50 pieces per design at USD 39-228 is a test of the line, not a commitment to the range.
Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, shipped as bulk carton, 50 per bag and certified SGS batch report, the figure being USD 39-228 for a 800-piece run.
Frequently Asked Questions
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white wedding Rings and Bands, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, on a 800-piece Distributor Tier order at USD 39-228.
How is wedding Rings and Bands packed for bulk carton, 50 per bag?
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, quoted at USD 39-228 per piece in bulk carton, 50 per bag.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which is USD 39-228 on the Distributor Tier schedule.
How long does a reorder of the same wedding Rings and Band take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white wedding Rings and Bands, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, on a 800-piece Distributor Tier order at USD 39-228.
Next Step
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 133 7744 7107 and mark it Distributor Tier, shipped as bulk carton, 50 per bag and certified SGS batch report.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 133 7744 7107, on a 800-piece Distributor Tier order at USD 39-228.
Related reading: Wedding Rings & Bands Trade Show Sample: The Reject Tray Policy That Decides a Partne - HOLYCOME Bridal Sets Shopify DTC: What a Report Proves and What It Does Not - HOLYCOME
Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.
Ask the workshop



