Factory-direct bridal jewelry, shipped to the USA

Bridal Sets

Sizing and Resizing Moissanite Bridal Sets Before They Ship

27 August 2026 · 5 min

The most avoidable cost in bridal wholesale is a returned set that needed half a size. A solitaire that comes back for resizing is a solitaire your bench can fix in ten minutes and put straight back in the case. A bridal set that comes back for resizing is a set where the band and the ring head no longer sit flush, because the two pieces were sized together at the factory and one of them has now been stretched. The fix is to get the size right before the set ships, and to understand what your bench can and cannot do after delivery.

Step 01

Why sets size differently than solitaires

A solitaire is one ring. A bridal set is two rings engineered to nest. When the factory sizes a set, it adjusts both rings on the same mandrel so the inner curves match. If your bench resizes only the solitaire after delivery, the band stops sitting flush and the set is broken as a set. It can still be sold as two separate rings, but at that point you have lost the 'set' premium that justified the stocking decision in the first place.

Step 02

Half sizes are non-negotiable

US bridal sizing runs in half sizes, and about 40% of brides land on a half size - 5.5, 6.5, 7.5. A supplier that only stocks whole sizes forces your customer into a size that will either spin on her finger or dig into her knuckle. We stock bridal sets in full and half sizes from 5 to 8, which covers roughly 90% of US brides. If a customer comes in at a 4.25 or 8.5, that is a custom order and you should quote it as such.

SizeShare of bridesStock depth at openReorder trigger
5.0 / 5.5~15%1 eachWhen empty
6.0 / 6.5~40%2 eachWhen down to 1
7.0 / 7.5~30%2 eachWhen down to 1
8.0 and above~15%1 eachCustom order
Step 03

What your bench can resize, and what it cannot

Plated 925 silver resizes well up or down about one full size without the plating visibly cracking. Beyond that, the plating flakes and the ring has to be re-plated, which adds cost and time. Solid 10k or 14k gold resizes more forgivingly because there is no plating layer to protect. The practical rule: if a customer buys a plated silver set and later wants to go up two sizes, send it back to us for factory re-sizing rather than attempting it on your bench. We re-fit the two rings together so the flush hold survives, and we re-finish the plating at the same time.

Step 04

Lead time math for custom sizing

In-stock sets in standard sizes ship in three to seven business days. A half-size that we already stock is not a custom order; it leaves on the same cadence. A truly custom set - a different center stone, a solid-gold shank, a non-standard size - runs 15 to 25 days. Quote your customer on the longer number, then pleasantly surprise her if it arrives early. The worst outcome is promising a two-week delivery and missing it by a week, which is the kind of story that ends a small shop's referral pipeline.

Step 05

The sizing-room conversation

When a customer tries on a set in your store, size both rings on the mandrel while she is wearing them together. A band that fits alone will feel tight when the solitaire sits next to it, because the two rings share knuckle space. Have her open and close her hand, make a fist, and type on a phone for thirty seconds. If the set spins or pinches, go up half a size before you take the sale. That one habit eliminates most of the returns that hit bridal shelves.

Step 06

The at-home sizing conversation

About a third of bridal sales now happen online or over the phone, where the customer never tries the set on in your store. For those orders, a printable ring sizer mailed with a tape measure saves most of the sizing mistakes. Ask the customer to measure her engagement ring - the one she already wears - across the inner diameter in millimeters, and match that to your size chart. If she is between sizes, go up half a size. Fingers swell through the day and through a hot wedding day, and a slightly loose ring beats a stuck one on her wedding morning. The customer who ends up with a ring that fits on the day remembers it; the one who had to run to a jeweler at the last minute does not.

Step 07

What to write on the order

When a set leaves your bench to be sized, write the size and the customer's name on a sticker on the box, not on a loose slip. Sets come back in batches, and the loose slips vanish. The ten seconds it takes to label the box prevents the moment where three brides are calling to ask where their rings are and you cannot tell which box is which.

The sizing habits that prevent returns are worth writing into your order checklist:

  1. Size both rings on the mandrel while the customer wears them together, not separately.
  2. Go up half a size when the customer is between sizes, especially for a summer wedding.
  3. Mail a printable sizer to online customers and ask them to measure a ring they already wear.
  4. Label the box with the size and the customer name before it leaves the bench.

The current set designs and their available half sizes are listed inside our wholesale bridal set collection.

For third-party reference, the Wikipedia article on moissanite details moissanite’s discovery, optical properties and use in jewelry.

Step 09

Frequently Asked Questions

Is moissanite a good diamond alternative for retail buyers?

Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.

What is the minimum order for wholesale moissanite?

MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.

Do you provide certificates with moissanite stones?

Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.

How long does sample and bulk production take?

Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .