Wedding Rings & Bands
Moissanite Jewelry Wholesale QC Checklist: Incoming Inspection
A boutique in Orlando received a 100-piece wholesale parcel, signed for it, and stocked it. Within ninety days, seven pieces came back—loose prongs, a cloudy stone, a missing stamp. By then the RMA window with the supplier had closed, and the boutique ate the cost. Every return that survives the RMA window is a return you could have caught at the door. Incoming QC takes about ten minutes per box. It is the cheapest insurance a bridal buyer can buy. Below is the checklist we run on our own parcels before they ship, and the one we expect our buyers to mirror when they open the box.
The cost of skipping incoming QC
Industry defect rates on wholesale fashion jewelry run 3–5% on a typical parcel. On a 100-piece order at a USD 40 wholesale cost, that is USD 120–200 of dead inventory—and worse, it is the pieces that sell first, because the visible ones are always the ones that fail in the client's hand.
| Defect type | Frequency in unchecked lots | Caught by incoming QC? |
|---|---|---|
| Loose prong / moving stone | 1.5–2% | Yes—prong pull test |
| Cloudy or mismatched stone | 0.5–1% | Yes—light inspection |
| Missing metal stamp | 0.5% | Yes—visual check |
| Thin or worn plating | 0.5–1% | Partially—finish inspection |
| Certificate mismatch | 0.3% | Yes—number match |
The combined 3–5% sounds small until you annualize it across four orders a year. That is roughly a full month's margin on QC-failing stock. The ten minutes per box is not overhead; it is the highest-return hour in the buying cycle.
The five-step incoming QC checklist
- Visual pass: Lay every piece on a white tray. Check for scratches, mismatched rhodium, cast marks on the shank, and plating unevenness. Reject anything that looks off under a 6,500K lamp.
- Prong pull: Gently tug each center and pavé stone with a plastic tweezer. A stone that moves beyond a faint settle-in feel fails. We test at 1.5kg at the factory; this is the lightweight re-check.
- Stamp and mark: Inspect the inner shank for the S925 or 14K stamp and the maker's mark. Missing stamps are a compliance problem for US and EU resale.
- Certificate match: For any GRA-certified piece, read the laser inscription on the girdle against the paper certificate. The numbers must match character for character.
- Packaging and box fit: Confirm the piece sits centered in its insert. A rattling fit means the piece is likely to fail in transit to your client—flag it now.
We run this same checklist on every parcel before it leaves our bench, with one extra step: a 1.5kg prong-pull on a calibrated gauge, not just a hand tug. Our shipped defect rate sits under 1.5%, roughly half the industry norm. That gap is why we are comfortable asking buyers to mirror the checklist—if our QC is doing its job, your incoming pass should find almost nothing.
Running QC by shop size
One-person boutique
You do not need a bench or a microscope. A bright lamp, a white tray, and ten minutes per box is enough. Prioritize the prong pull and the certificate match—those two steps catch 80% of real defects.
Multi-staff salon with a bench jeweler
Assign the incoming pass to the bench jeweler on delivery day. Add a quick sizing check on rings (measure the inner diameter with a gauge) so a mislabeled size does not get stocked as a wrong size. This also feeds your reorder data—you learn which sizes actually arrive.
Online retailer shipping direct
You cannot inspect after the parcel reaches you because it ships onward. Instead, require your supplier to share QC photos per parcel before dispatch. Every piece should be photographed against the certificate. Build this into the PO terms.
Frequently Asked Questions
How long should incoming QC take on a 100-piece parcel?
About ten minutes per box, or roughly an hour and a half for a 100-piece parcel. The five-step visual and prong-pull pass does not require a bench, only a lamp and a white tray.
What should I do if I find a defect?
Photograph the defect, note the SKU, and file it within the RMA window. Our RMA window is 14 days from delivery, with replacement and freight covered on confirmed QC failures.
How strict should the prong pull be?
A stone that moves under a gentle plastic-tweezer tug should be flagged. We test every ring at 1.5kg on a calibrated gauge at the factory; a hand tug is the lightweight re-check at your end.
Do I need a microscope to check moissanite quality?
No. Light return, cloudiness, and certificate inscription are all visible under a bright 6,500K lamp. Reserve microscope inspection for high-value custom commissions, not incoming bulk QC.
What defect rate should I expect from a good supplier?
Under 1.5% shipped defect rate is a best-practice number. Anything above 3% on a typical parcel means the supplier is skipping bench QC and passing the cost to you.
Key takeaways
- Ten minutes per box catches 3–5% of defects that would otherwise become returns you cannot RMA.
- Prong pull and certificate match alone catch 80% of real problems.
- Online buyers should require QC photos per parcel before dispatch, not after.
- Hold your supplier to a written sub-1.5% defect rate and a 14-day RMA window.
Request our printed QC checklist with your next wholesale order. See our wedding bands, review ring specs, or check wholesale terms. To request pre-ship QC photos, contact our QC desk.
Gemstone grading terminology used here follows the Gemological Institute of America’s gem encyclopedia.
Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.
Ask the workshop



