Factory-direct bridal jewelry, shipped to the USA

Loose Stones

Loose Stones Trade Show Sample: The Reject Tray Policy That Decides a Partnership

9 November 2026 · 11 min

Step 01

Trade Show Sampling for loose Stones

A trade show converts on the sample that leaves the booth, not on the catalog that gets left behind. The sample card has to carry the model number, the metal, the stone size, the FOB price and the MOQ, or the follow-up email starts from zero, and 100 pieces leaves Wuzhou in display tray with sample card at USD 3-104.

Ten to twelve pieces on a tray is the useful number for loose Stones. More than that and the buyer photographs instead of touching, and a photograph is not an order, the figure being USD 3-104 for a 100-piece run.

Loose Stones wholesale piece from the HOLYCOME line in Wuzhou

The follow-up window is seven days. After that the card sits in a stack. We write the quote the same week and put the sample in the post so the buyer has the piece on the desk when the price arrives, and 100 pieces leaves Wuzhou in display tray with sample card at USD 3-104.

Step 02

The Reject Tray Policy That Decides a Partnership in the Trade Show Sample Program

A US buyer of loose Stones sent us a competitor's loose Stone in August with one question: why does this fail at sieve drift after a season. We measured it, rebuilt the spec around size distribution within the declared sieve and zero girdle chips on arrival, and shipped 100 loose Stones that cleared inspection with zero rejects, certified GRA report and packed display tray with sample card at 100 pieces.

At 100 pieces the buyer was not buying a defect, they were buying a document. The Trade Show Sample order carried a photo and a price, and sieve drift had nowhere to live, with GRA report and display tray with sample card stated on the same sheet.

Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call, on a 100-piece Trade Show Sample order at USD 3-104.

Loose Stones setting and finish detail on a HOLYCOME factory sample
Step 03

Four Spec Lines a Trade Show Sample Buyer Checks

Most quotes describe the loose Stone and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard, with GRA report and display tray with sample card stated on the same sheet, the figure being USD 3-104 for a 100-piece run.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Stone color consistencyGraded by eye under D65Color matched to a retained master stone, per trayRepeat color complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement

Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection, priced at USD 3-104 for the 100-piece Trade Show Sample run.

Step 04

Cost Split on a Trade Show Sample Piece at USD 3-104

At USD 3-104 per piece for loose Stones, the stone is roughly a quarter and labor is where two quotes for the same drawing diverge.

Cost lineShareWhat moves it
Base metal or alloy for loose Stones32%Alloy choice and casting yield
Stone or melee for loose Stones23%Sieve range and lot batching
Setting and finishing labor for loose Stones21%Jig design and bench minutes
Plating, polish and QC for loose Stones14%Per-tray versus per-piece checks
Packaging for loose Stones10%display tray with sample card

The saving in the cheapest loose Stones quote hides in the plating line and the stone grade. Both appear in season two, not on arrival, and 100 pieces leaves Wuzhou in display tray with sample card at USD 3-104.

Step 05

The Reject Tray Policy That Decides a Partnership

Buyers in US e-commerce tend to over-index on unit price for loose Stones and under-index on what happens after delivery, shipped as display tray with sample card and certified GRA report.

The commercial version of this question for loose Stones is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, priced at USD 3-104 for the 100-piece Trade Show Sample run.

That clause matters more than a discount on loose Stones. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, with GRA report and display tray with sample card stated on the same sheet.

Step 06

What the Quote Actually Covers

This is where loose Stones stops being a commodity and starts being a supply relationship, the figure being USD 3-104 for a 100-piece run.

What buyers underestimate on loose Stones is the cost of the interruption, not the cost of the piece. A missing 6% of a run stalls a launch, and a stalled launch costs more than the 6% ever did, and 100 pieces leaves Wuzhou in display tray with sample card at USD 3-104.

We plan a 3-5% buffer on first runs of loose Stones and tell the buyer it exists. Hiding a buffer and shipping it as production is how a supplier trains a buyer to distrust the count, which the Trade Show Sample file records at USD 3-104 in display tray with sample card.

Step 07

Terms Behind a Trade Show Sample Order

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Trade Show Sample order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is USD 3-104 on the Trade Show Sample schedule.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 3-104 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the display tray with sample card format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Trade Show Sample file records at USD 3-104 in display tray with sample card.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of size distribution within the declared sieve for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, quoted at USD 3-104 per piece in display tray with sample card.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, shipped as display tray with sample card and certified GRA report.

Step 08

Three Failures That Reach the Trade Show Sample Bench

mixed color lots

Mixing near-colorless and G-H stones in one parcel produces a finished piece with a visible tonal step. Parcels ship by single lot, quoted at USD 3-104 per piece in display tray with sample card.

In a 100-piece run this typically shows on 14 of pieces. Catching it means measuring size distribution within the declared sieve at the tray level, not inspecting the finished carton, which is how the Trade Show Sample account reads it at USD 3-104.

girdle damage

Stones packed loose in a bag chip each other in transit. Individually wrapped parcels cost more and arrive usable, priced at USD 3-104 for the 100-piece Trade Show Sample run.

The commercial effect is replacement stones plus a sorting delay on the buyer's line. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, quoted at USD 3-104 per piece in display tray with sample card.

sieve drift

A parcel sold as 2.0-2.2 mm with 15% of stones at 1.9 mm changes the setting labor on the buyer's bench. Sieve the parcel, do not sample it, which the Trade Show Sample file records at USD 3-104 in display tray with sample card.

Our countermeasure is a gauge and a written limit. It adds about 6 seconds per piece and removes the defect from the run rather than from the carton, on a 100-piece Trade Show Sample order at USD 3-104.

Step 09

The First Trade Show Sample Order

The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods, shipped as display tray with sample card and certified GRA report, which the Trade Show Sample file records at USD 3-104 in display tray with sample card.

The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand, and at USD 3-104 for 100 pieces that is the number the buyer signs.

Step 10

The Calendar Behind a Trade Show Sample Run

For display tray with sample card at 100 pieces, the sequence is fixed and the dates are the only thing that moves, which the Trade Show Sample file records at USD 3-104 in display tray with sample card.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

MOQ stays at 50 pieces per design on loose Stones, low enough to test a shelf and high enough to keep the gauge check independent, which the Trade Show Sample file records at USD 3-104 in display tray with sample card.

Step 11

Getting display tray with sample card to US e-commerce

Export runs through Guangzhou or Shenzhen. For Trade Show Sample orders the GRA report file travels with the shipping documents, not separately, and the Trade Show Sample quote for it sits at USD 3-104.

The clearance term matters more than the rate at 100 pieces. A duty surprise can cost more than the whole freight line, priced at USD 3-104 for the 100-piece Trade Show Sample run.

The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against size distribution within the declared sieve and zero girdle chips on arrival, the figure being USD 3-104 for a 100-piece run.

Step 12

Frequently Asked Questions

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if sieve drift shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and the Trade Show Sample quote for it sits at USD 3-104.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, which is USD 3-104 on the Trade Show Sample schedule.

What is the minimum order for loose Stones?

50 pieces per loose Stone. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, certified GRA report and packed display tray with sample card at 100 pieces.

Do you supply certificates for loose Stones?

GRA report on loose Stones above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of size distribution within the declared sieve, which is what a counter or a listing actually needs, and the Trade Show Sample quote for it sits at USD 3-104.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if sieve drift shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and the Trade Show Sample quote for it sits at USD 3-104.

Step 13

Next Step

If the USD 3-104 band fits your shelf, send the drawing and we will quote the 100-piece Trade Show Sample run inside one business day.

HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across loose Stones and adjacent categories. service@holycome.com or WhatsApp +86 133 7744 7107, which is how the Trade Show Sample account reads it at USD 3-104.

Related reading: Loose Stones Q4 Holiday Stock: What the Quote Actually Covers - HOLYCOME Engagement Rings Bridal Boutique: The Sample Approval That Survives Production - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .