Factory-direct bridal jewelry, shipped to the USA

Loose Stones

Repair and Refinish Path for Loose Stones: What Can Be Fixed - GemWSL

17 November 2026 · 3 min

Every loose stones category tells you what the factory can repeat, if you read it in the right order.

Step 01

The repair path is decided at purchase

Whether a Loose Stones design can be repaired depends on the setting type and the metal, both of which are fixed before the first sale. The range holds 894 designs in this category.

Buyers who ask about the repair path before ordering tend to have fewer returns than buyers who ask after.

Read the metal line as a lead time signal: 925 sterling silver at 100% is the path production already runs every week.

The metal split is narrow on purpose: 925 sterling silver at 100% keeps the quote cycle short for most reorders.

Step 02

What is repairable, by build

BuildTypical repairLimit
Prong settingRe-tip or replace a stoneRepeated work thins the prongs
Bezel settingRefinish onlyStone replacement needs a rebuild
Plated baseReplate once or twiceEach cycle removes base material
Solid goldResize, re-tip, repolishCost scales with metal weight

925 sterling silver accounts for 100% of the designs. Lab grown diamond is the dominant stone at 98%.

Where the stone changes, the price band usually changes with it, which is why lab grown diamond at 98% anchors the core of the range.

Step 03

Why plating limits the repair path

A plated piece can be refinished, but every cycle takes a little of the base with it. After two cycles the surface starts to show the difference, which is why the wear window has to be explained at the point of sale.

A range of 894 designs is deep enough that a shortlist of six can be drawn without leaving a price slot empty.

The figure of 894 is worth reconciling against your own shortlist before the quote, because it sets how much of the buy can be stock.

Step 04

Setting type and stone security

A bezel protects a stone better than prongs and is harder to repair. A prong setting is easy to re-tip and easier to damage. Neither is better in the abstract; the choice depends on how the piece will be worn.

  • Ask which setting the range uses before committing
  • Confirm whether the stone can be replaced without a rebuild
  • Check that the repair cost is quoted per operation, not per hour

Stone coverage is concentrated in lab grown diamond at 98%; anything else is quoted as a separate line.

Step 05

Writing the care line that prevents disputes

The care instruction should match the build, not the aspiration. A plated design needs a different line from a solid gold one, and the listing is where that line belongs.

Step 06

Range snapshot: Loose Stones by the numbers

Lab grown diamond is the dominant stone at 98%.

DimensionReadingBuying note
Designs on file894Shortlist can come from stock patterns
Dominant metal925 sterling silver (100%)Quote cycle stays short
Dominant stonelab grown diamond (98%)Sourcing already settled

Lab grown diamond is the dominant stone at 98%. Read the snapshot before the shortlist: a category that is narrow in metal but deep in cut behaves differently from one that is the other way round.

Step 07

Frequently Asked Questions

Can a plated ring be replated?

Usually yes, once or twice, depending on the base. Each cycle removes a little material, so the finish is not indefinitely renewable.

Is a bezel setting harder to repair?

Stone replacement usually requires a rebuild. Refinishing is straightforward. That trade-off should be part of the buying decision.

Should I offer repairs as a service?

Only if you can quote them per operation and have a bench that can do the work. Otherwise the promise becomes a liability.

What causes the most repair requests?

Loose stones in prong settings and plating wear at the shank. Both are predictable from the build.

Does repair cost affect the retail price?

It affects the total cost of ownership, which is why the care line and the setting choice belong in the same conversation.

If you want to work from the current range rather than from a catalog PDF, send the two price slots you sell and the size bands you stock. We will reply with the designs that fit, the build on each, and the reorder path. GemWSL keeps the full range in one place.

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .