Factory-direct bridal jewelry, shipped to the USA

Loose Stones

Reorder Signals for Loose Stones: What to Change on Round Two - GemWSL

17 November 2026 · 3 min

The question that decides a loose stones order is rarely the one printed in the catalog.

Step 01

The second order is where margin is won

The first order answers whether the factory can build the product. The second order answers whether you can buy it well. The range holds 894 designs in this category.

Most of the gain on round two comes from three changes: narrowing the shortlist, deepening the winners, and removing the designs that only looked good on a page.

Read the metal line as a lead time signal: 925 sterling silver at 100% is the path production already runs every week.

Anything outside the 925 sterling silver group is a minority build, and minority builds are where a reorder date slips.

Step 02

What the range tells you before the sell-through report

SignalWhat it suggestsRound-two action
Design repeats earlyDemand is concentratedDeepen units, keep price
Even spreadAssortment is workingHold width, test one stretch
One design stallsSpec mismatch or size gapDrop or re-sample
Returns cluster by fieldSetting or plating issueChange build, not photo

925 sterling silver accounts for 100% of the designs. Lab grown diamond is the dominant stone at 98%.

The stone concentration matters at the listing level: 98% of the range can be described with one consistent disclosure line.

Step 03

Narrowing without losing coverage

A shortlist that shrinks from six to four should keep one design per price point. Cutting the entry build to protect the top price is the most common mistake, because the entry build is what brings new buyers into the category.

The figure of 894 is worth reconciling against your own shortlist before the quote, because it sets how much of the buy can be stock.

Step 04

The three questions to ask the factory

  • Which designs in my shortlist are stock and which are made to order
  • What changed in the build since the first order
  • Which stone or metal substitution would delay a reorder

Reference designs in the range include Yellow Moissanite Loose Stones - Round Oval Heart Shapes Perfect For Engagement ; Bulk OEM 1ct D Color Moissanite Round Loose Moissanite Stones in 925 Sterling Si; Custom Private Label Lab-Grown Diamond Round Loose Moissanite Stones in 925 Ster.

Stone coverage is concentrated in lab grown diamond at 98%; anything else is quoted as a separate line.

Step 05

Setting the round-two quantities

Quantities should follow the concentration you measured, not the average. If two designs carry most of the sell-through, the reorder should reflect that ratio rather than adding units evenly across the shortlist.

Step 06

Range snapshot: Loose Stones by the numbers

Lab grown diamond is the dominant stone at 98%.

DimensionReadingBuying note
Designs on file894Shortlist can come from stock patterns
Dominant metal925 sterling silver (100%)Quote cycle stays short
Dominant stonelab grown diamond (98%)Sourcing already settled

Lab grown diamond is the dominant stone at 98%. Read the snapshot before the shortlist: a category that is narrow in metal but deep in cut behaves differently from one that is the other way round.

Step 07

Frequently Asked Questions

How soon should a reorder happen?

When the sell-through pattern is clear enough to change the mix, not before. Reordering on the calendar rather than on demand is how dead stock accumulates.

Should I reorder the exact same build?

Only if the first build passed your own checks. If a field caused returns, change that field rather than the design.

Is it normal for a factory to substitute materials on a reorder?

It should not be. Ask for written confirmation that the build is unchanged, and re-check the spec sheet against the new lot.

What if the best seller is out of stock?

Ask which design in the same price slot can carry the demand, and treat that as a planned substitution rather than an exception.

How many designs should a mature category carry?

Enough to cover the price slots you sell, no more. Depth per design beats width once demand is known.

If you want to work from the current range rather than from a catalog PDF, send the two price slots you sell and the size bands you stock. We will reply with the designs that fit, the build on each, and the reorder path. GemWSL keeps the full range in one place.

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .