Factory-direct bridal jewelry, shipped to the USA

Engagement Rings

Engagement Rings Wholesale: 60-Minute Incoming QC Walkthrough

18 November 2026 · 6 min

Step 01

Why the first hour decides your whole engagement rings wholesale order

Most buyers I talk to open a carton, count the boxes, pull one ring out, hold it to the light, and call it received. That takes four minutes. Then three weeks later they find a bent prong on SKU 14 and the claim window is half gone.

Incoming QC is not a vibe check. It is a sequence, and it should run the same way every time so your staff cannot skip steps when the truck is late. Below is the exact order we run at our own dock, and the order I recommend to any buyer receiving engagement rings wholesale from us or from anyone else.

One framing number before we start: budget 55 to 65 minutes for a 200-piece mixed lot. Fewer pieces, same sequence, less clock.

Step 02

Minute 0 to 5: carton condition and paperwork before anything is cut

Photograph the carton sealed, all six faces, with the shipping label readable. If the tape is lifted, the corner is crushed, or the carton has been re-taped, that photo is your entire insurance file. Do it before you touch the contents.

Then match three documents against each other: the commercial invoice, the packing list, and the certificate envelope count. GRA cards and IGI certificates should be listed per SKU, not as a lump total. A packing list that says "certificates included" without counts is a red flag on any wholesale jewelry shipment.

  • Carton seal intact and photographed
  • Invoice, packing list, and certificate count reconciled
  • Deposit and balance payment reference checked against the order
  • Country of origin and DDP terms visible on the label
Step 03

Minute 5 to 15: count, weigh, and split the lot

Count outer boxes against the packing list, then count rings against the inner labels. Do not count into a pile. Count SKU by SKU and write the number down, because human memory at piece 60 is worthless.

Weigh the lot on a kitchen scale to the gram. A 200-piece moissanite lot that should weigh 1,240 grams and comes in at 1,180 grams has fifty pieces of silver missing or a thinner band specification than you approved. Weight will not tell you which, but it tells you to stop and look.

Split the shipment into three piles: stock sizes, custom sizes, and repair candidates. The repair pile gets tagged in this window, not later.

Step 04

Minute 15 to 35: the stone check, one ring at a time

This is the stage most buyers rush, and it is the stage that costs the most money when missed. Every stone gets a loupe under a daylight lamp, not overhead office lighting, which hides color and fire.

CheckWhat you are looking forReject ifTime per ring
Stone seatStone flush in the setting, no rocking under a pencil eraserAny movement or visible gap20 seconds
Prong tipsEven length, rounded and polished, no burrOne prong short or sharp15 seconds
Color and clarityMatches the approved sample under daylightVisible tint shift across the lot15 seconds
Certificate matchGRA card number and stone dimensions agreeCard from a different SKU10 seconds

For lab-grown diamond lines, the IGI report number must match the laser inscription. If you do not have a loupe with enough magnification to read an inscription, buy one before your next delivery. It costs less than one returned ring.

Pull 100 percent of center stones on orders under 100 pieces. Above that, pull every center stone anyway, and sample the side stones at AQL 2.5.

Step 05

Minute 35 to 45: metal, finish, and sizing

Check the stamp inside the band. 925 for silver, and the correct purity mark for gold. A missing or double-stamped mark is a customs problem, not just a cosmetic one.

Run a finger inside the band and around the gallery. Sharp edges, solder blobs, and porosity show up here first. Then check rhodium and plating coverage at the prong bases, which is where plating always thins out.

If the plating looks bright but the prong bases are dull, the piece was polished after plating, not before. That finish will fail in six weeks of daily wear.

Size-check with a mandrel on every ring in the stock sizes, and spot-check custom sizes against the order sheet. Half-size drift is the single most common complaint in engagement rings wholesale, and it is almost always a sizing bench issue rather than a casting issue.

Step 06

Minute 45 to 55: fittings, packaging, and the presentation layer

Open every box. A ring that survived the metal check can still arrive with a loose stone because the box insert was undersized and the piece rattled for 5,000 kilometers.

  • Insert holds the ring without movement when you shake the box gently
  • Certificate card sits flat and does not crease the band
  • Box hinge and magnet close cleanly
  • Cleaning cloth and care card present if specified
  • Barcode or SKU sticker matches the packing list

Photograph one complete unit as the buyer will receive it. That photo becomes your reference for every reorder, and it settles arguments faster than any email thread.

Step 07

Minute 55 to 65: AQL decision and the rework tag

Now you make the call. Use AQL 2.5 major and 4.0 minor on lots above 50 pieces. Anything that fails a functional check, meaning stone movement, prong failure, wrong size, or wrong certificate, is a major defect regardless of count.

Write the defect list by SKU with counts and photos, and send it the same day. Suppliers cannot fix what they cannot see, and a two-week-old photo set is useless for tracing a production batch.

This is also where our own numbers matter. Because we run a three-stage QC internally, incoming stone check, in-process inspection at setting and polishing, and pre-ship AQL sampling, your incoming defect rate should land around 20 percent lower than a typical trading company that only inspects at the end. The reason is not better eyes. It is that a stone rejected at the setting bench never becomes a finished ring that has to be shipped back.

Step 08

What to do with the rejected pieces

Do not ship them back immediately. Tag them, photograph them, and hold them for one business day while the supplier responds. Most factories, us included, will offer a rework, a credit, or a replacement ship on the next run, and a replacement on the next production batch is usually faster than a return.

Keep the rework tag on the piece until it is resolved. Untagged rejects migrate back into sellable stock and get sold to a customer, which is how a small QC miss becomes a refund and a review.

For reference on our side: MOQ is 1 piece on stock styles and 30 pieces on custom designs. Production runs 12 to 18 days. Payment is T/T 30 percent deposit with balance before ship, or PayPal for samples. DDP delivery lands in 5 to 8 days. You can reach the floor directly on WhatsApp at +86 133 7744 7107 or by email at service@holycome.com.

Step 09

Frequently Asked Questions

What is the MOQ for engagement rings wholesale orders?

One piece for stock designs and 30 pieces per design for custom work. Custom covers your own stone mix, metal, sizing curve, and packaging. Sample orders can ship as a single unit so you can run this checklist before committing to a full run.

How long does production and delivery take?

Production is 12 to 18 days after deposit and artwork approval. DDP delivery adds 5 to 8 days depending on destination. Stock items can move faster, and we will confirm the exact date on the proforma invoice.

How is pricing calculated and what certificates come with the rings?

Price is quoted per piece and depends on stone type, stone size, metal, and setting complexity. Moissanite lines ship with GRA cards, and lab-grown diamond lines ship with IGI reports where specified. Always confirm the certificate body on the order sheet before deposit.

If you want to test this checklist on a real lot, send your SKU list and target quantities to service@holycome.com or message +86 133 7744 7107 on WhatsApp, and ask for a sample quote with certificate details per line.

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .