Factory-direct bridal jewelry, shipped to the USA

Earrings

Earrings Distributor Tier: How the Second Order Becomes Cheaper

9 November 2026 · 11 min

Step 01

How the Second Order Becomes Cheaper in the Distributor Tier Program

A US buyer of earrings sent us a competitor's earring in January with one question: why does this fail at prong geometry after a season. We measured it, rebuilt the spec around stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm, and shipped 800 earrings that cleared inspection with zero rejects, quoted at USD 36-199 per piece in bulk carton, 50 per bag.

That rejection was avoidable at the drawing stage. Prong geometry belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival, shipped as bulk carton, 50 per bag and certified SGS batch report, shipped as bulk carton, 50 per bag and certified SGS batch report.

Earrings wholesale piece from the HOLYCOME line in Wuzhou

We kept the Distributor Tier price and changed the four measurements that matter. The rebuild cost about 22 seconds per piece and removed the whole claim conversation, on a 800-piece Distributor Tier order at USD 36-199.

Step 02

Cost Split on a Distributor Tier Piece at USD 36-199

At USD 36-199 per piece for earrings, the stone sits near a quarter and the labor line moves by double digits between two quotes for one drawing.

Cost lineShareWhat moves it
Base metal or alloy for earrings32%Alloy choice and casting yield
Stone or melee for earrings23%Sieve range and lot batching
Setting and finishing labor for earrings21%Jig design and bench minutes
Plating, polish and QC for earrings14%Per-tray versus per-piece checks
Packaging for earrings10%bulk carton, 50 per bag

The saving in the cheapest quote hides in plating and stone grade. At 800 pieces that saving is visible in season two, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.

Step 03

Four Spec Lines a Distributor Tier Buyer Checks

The Distributor Tier buyer signs on four numbers. The table puts the trade default beside our standard so the difference is visible before the deposit, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.

Earrings setting and finish detail on a HOLYCOME factory sample
Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

None of the four adds cost at USD 36-199. They add about 22 seconds per piece and remove the reason to inspect twice.

Step 04

Distributor Pricing Tiers on earrings

A distributor does not buy a earring, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, which is USD 36-199 on the Distributor Tier schedule.

What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

Turn is the number the distributor manages. At USD 36-199 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of earrings move in 800-piece lots rather than in the 50-piece sample quantity.

Step 05

Three Failures That Reach the Distributor Tier Bench

prong geometry

A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, and the Distributor Tier quote for it sits at USD 36-199.

Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, which is how the Distributor Tier account reads it at USD 36-199.

rhodium burn-off

A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, on a 800-piece Distributor Tier order at USD 36-199.

In a 800-piece run this typically shows on 17 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, quoted at USD 36-199 per piece in bulk carton, 50 per bag.

size-step drift

A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, the figure being USD 36-199 for a 800-piece run.

The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

Step 06

Terms Behind a Distributor Tier Order

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, shipped as bulk carton, 50 per bag and certified SGS batch report.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 36-199 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, quoted at USD 36-199 per piece in bulk carton, 50 per bag.

Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, shipped as bulk carton, 50 per bag and certified SGS batch report.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.

Step 07

What the Quote Actually Covers

Buyers who have run three programs on earrings know this instinctively; first-time buyers learn it the expensive way, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.

One practical note on timing for earrings: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, quoted at USD 36-199 per piece in bulk carton, 50 per bag.

We date the earrings proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, which is USD 36-199 on the Distributor Tier schedule.

Step 08

MOQ, Mixed Designs and the Real First Order

The short version for earrings: it is arithmetic, not relationship. The long version is below, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.

In US wholesale terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For earrings, we publish the figure per SKU and hold it for the order window rather than for the calendar year, the figure being USD 36-199 for a 800-piece run.

Practically, it shows up in three places for earrings: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, on a 800-piece Distributor Tier order at USD 36-199.

Step 09

The Calendar Behind a Distributor Tier Run

Nothing in this sequence is clever. Each step exists because skipping it cost somebody a claim on earrings at USD 36-199.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 36-199.

Step 10

Getting bulk carton, 50 per bag to US wholesale

Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in US wholesale, which is how the Distributor Tier account reads it at USD 36-199.

FOB is the default and DDP is the option. Buyers new to US wholesale usually take DDP once and then switch after they see the breakdown, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.

At receiving, count cartons, weigh one tray and measure ten pieces against stone retention after a 40-cycle wear test. Twenty minutes here saves a season of returns, quoted at USD 36-199 per piece in bulk carton, 50 per bag.

Step 11

The First Distributor Tier Order

Start with three designs at 50 pieces each. That covers the 800 pieces you need to read sell-through without betting on one model, the figure being USD 36-199 for a 800-piece run.

Sample 3-5 days, bulk 15-20 days under 500 pieces, 800 pieces inside that window. The calendar is the same on every Distributor Tier run, shipped as bulk carton, 50 per bag and certified SGS batch report.

Step 12

Frequently Asked Questions

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white earrings, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is how the Distributor Tier account reads it at USD 36-199.

How is earrings packed for bulk carton, 50 per bag?

Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and at USD 36-199 for 800 pieces that is the number the buyer signs.

How long does a reorder of the same earring take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, quoted at USD 36-199 per piece in bulk carton, 50 per bag.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white earrings, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is how the Distributor Tier account reads it at USD 36-199.

Step 13

Next Step

If the USD 36-199 band fits the shelf, send a drawing and we quote the 800-piece Distributor Tier run inside one business day.

HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across earrings and adjacent categories. service@holycome.com or WhatsApp +86 133 7744 7107, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.

Related reading: Earrings Trade Show Sample: The Reject Tray Policy That Decides a Partnership - HOLYCOME Bracelets & Bangles Shopify DTC: What a Report Proves and What It Does Not - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .