Factory-direct bridal jewelry, shipped to the USA

Earrings

Bulk Moissanite Stud Earrings: Boutique Assortment

31 July 2026 · 4 min

A boutique in Florida ordered three hundred pairs of moissanite studs from a new vendor. Within ninety days, eighteen percent of the pairs came back with a loose stone, because the settings were glued rather than pronged. The owner lost more on returns and bride disappointment than she had made on the margin. She now insists on prong settings and a pull-tested back on every bulk pair.

Stud earrings are the highest-volume bridal earring, and they fail in predictable ways. Here is the size-tiered assortment we recommend, with the settings spec that keeps returns down.

Step 01

Where bulk stud earrings fail

The failure is almost never the stone. Moissanite at 9.25 on the Mohs scale does not scratch in normal wear. The failure is the seat: a poorly set stud loosens, and the stone falls out on the bride's wedding day. Glue-set studs are the classic culprit. We prong-set every stone on studs and pull-test each pair, which is the spec that separates a durable pair from a return.

SizeLook (diamond equivalent)Share of bulk assortmentTypical use
4mm0.25 carat25%Everyday, second-pair upsell
5mm0.33 carat20%Conservative brides
6.5mm1 carat35%Volume bridal size
8mm1.5 to 2 carat20%Statement / rehearsal
Step 02

Post and back spec that matters

The stud post and back are as important as the stone. A thin post bends; a cheap butterfly back slides off. For bridal retail, we recommend:

  • Post gauge: 0.8mm to 1mm in rhodium-plated 925 sterling silver. Thin posts bend in a bride's jewelry box.
  • Back: clutch or screw back. Screw backs cost more but never slide off on a wedding day. For the 8mm statement pairs, screw backs are worth the cost.
  • Setting: four-prong or bezel. Bezel settings are safer for active brides; prong settings show more stone.
  • Plating: 0.5 micrometers rhodium, matching our ring standard. Studs get handled constantly in try-ons.

On certification, studs below 3mm are batch-tested, but every stone at 4mm and above ships with a GRA certificate tied to the pair. That matters because brides ask about the stone at the counter, and a real document closes the sale.

Step 03

Assortment plan by buyer type

New boutique

Start with sixty pairs: twenty 4mm, ten 5mm, twenty 6.5mm, ten 8mm. Keep the 6.5mm deep because it is the bridal workhorse. This opening buy lands near two thousand dollars.

Established bridal store

Push to a hundred and fifty pairs and add a small line of halo studs or drop studs for brides who want more than a classic stud. Keep the classic stud line as the volume base.

Online bridal retailer

Photograph the size scale on a real ear, not on a bust. Brides overestimate how large 8mm looks, and a size-scaled photo reduces returns from "it was bigger than I wanted."

Step 04

Why loose-stud returns still happen

Even with prong settings, a small share of studs loosen in the first year, almost always because the post was bent in a bag or clutch. The fix is partly product and partly advice. We ship each pair in a rigid gift box with a notched insert, not a soft pouch, because pouch storage is where posts get bent and prongs nudged. At the counter, we tell boutiques to hand brides a small jewelry pouch with the pair and to advise against tossing studs into a makeup bag. That one piece of customer advice cuts post-warranty returns by a noticeable margin, because most loosening happens outside the store, in a drawer or travel case. It costs you nothing and protects the reputation of the line you are selling.

Step 05

Frequently Asked Questions

What moissanite stud size sells best for bridal?

The 6.5mm round is the volume leader, reading as a one-carat diamond equivalent. It should make up roughly a third of your bulk stud order.

Are prong-set studs better than glue-set?

Yes. Glue-set studs loosen over time and lose stones. Every bulk pair we ship is prong-set and pull-tested, which keeps the 90-day return rate well under one percent.

Should I stock screw-back or butterfly-back studs?

Use screw backs for the larger 6.5mm and 8mm pairs, where a lost stone on a wedding day is costly. Butterfly backs are fine for the everyday 4mm line.

Do bulk stud earrings ship with certificates?

Stones at 4mm and above ship with individual GRA certificates. Smaller 2mm to 3mm studs are batch-tested, since individual certs at that scale are not practical.

How many pairs should a bridal boutique carry?

A working stud assortment runs sixty to a hundred and fifty pairs. Beyond that, the wall stops curating and starts looking like a general accessory rack.

Step 06

What to take away

  • Depth the 6.5mm size; it is the bridal volume size.
  • Prong-set and pull-tested backs are non-negotiable for bulk studs.
  • Photograph size on a real ear to cut online returns.

Request a bulk stud quote: MOQ 30 pairs, mixed sizes allowed, GRA certified per stone. Browse bridal earrings, read our earring buying guides, and pair studs with pendants for complete looks.

The 92.5% silver composition and properties of sterling silver are described in the Wikipedia entry on sterling silver.

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .