Factory-direct bridal jewelry, shipped to the USA

Bridal Sets

Bridal Sets Valentine Program: MOQ, Mixed Designs and the Real First Order

9 November 2026 · 10 min

Step 01

MOQ, Mixed Designs and the Real First Order

Last July, a US buyer of bridal Sets placed 300 bridal Sets against a sample signed in November. The first container landed with 9 pieces that failed on metal lot mismatch alone, and USD 40-140 landed on the buyer's P&L before a single unit sold, which is USD 72-470 on the Valentine Program schedule.

On a 300-piece order at USD 72-470, a metal lot mismatch rate above two percent is not a quality surprise. It is a costing error that shows up as a credit note three weeks later.

Bridal Sets wholesale piece from the HOLYCOME line in Wuzhou

Nothing in the rebuild was expensive. A gauge, a written limit and a retained tray did the work that a discount would only have delayed, with IGI report and heart gift box stated on the same sheet, and at USD 72-470 for 300 pieces that is the number the buyer signs.

Step 02

What US buyers Check Before They Sign

At USD 72-470 per piece the four measurements below are worth more than the discount being negotiated. One of them costs nothing to write down.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit
Plating thicknessNominal only0.20 micron rhodium logged per lot, 3 microns on vermeilWear-through inside one season
Surface porosity after polishSeen after platingCast porosity checked before plating, rejects pulled at that stagePlating blister six weeks later

Write these into the Valentine Program purchase order and the arrival check becomes arithmetic instead of recollection, on a 300-piece Valentine Program order at USD 72-470.

Step 03

Where USD 72-470 Per Piece Actually Goes

Cost at USD 72-470 leaves no room for assumption. The table shows which line compresses and which line only moves quality down.

Bridal Sets setting and finish detail on a HOLYCOME factory sample
Cost lineShareWhat moves it
Base metal or alloy for bridal Sets30%Alloy choice and casting yield
Stone or melee for bridal Sets20%Sieve range and lot batching
Setting and finishing labor for bridal Sets19%Jig design and bench minutes
Plating, polish and QC for bridal Sets12%Per-tray versus per-piece checks
Packaging for bridal Sets19%heart gift box

A factory that cannot state its bench minutes per piece has never costed its own line. Ask for minutes and for the reject rule, not for a discount, which is how the Valentine Program account reads it at USD 72-470.

Step 04

Order Terms, Sample Timing and Packing

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 300-piece Valentine Program order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, certified IGI report and packed heart gift box at 300 pieces.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 72-470 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the heart gift box format at 300 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is how the Valentine Program account reads it at USD 72-470.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of cross-piece color match for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, the figure being USD 72-470 for a 300-piece run.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and at USD 72-470 for 300 pieces that is the number the buyer signs.

Step 05

The Three Failures We See Most in Incoming Samples

metal lot mismatch

A set assembled from two casting lots shows a tonal step between the ring and the pendant under daylight. One lot per set is the rule, which the Valentine Program file records at USD 72-470 in heart gift box.

The commercial effect is piece replacement and a box reship, typically USD 18-30 per set. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, shipped as heart gift box and certified IGI report.

stone count variance

A halo set quoting 42 stones that ships with 38 reads as a downgrade. Count per piece, not per order, priced at USD 72-470 for the 300-piece Valentine Program run.

Our countermeasure is a gauge and a written limit. It adds about 28 seconds per piece and removes the defect from the run rather than from the carton, and the Valentine Program quote for it sits at USD 72-470.

box fit

A set that does not sit flat in its box photographs badly and arrives with a shifted piece. Box tolerance is part of the product, the figure being USD 72-470 for a 300-piece run.

In a 300-piece run this typically shows on 8 of pieces. Catching it means measuring cross-piece color match at the tray level, not inspecting the finished carton, shipped as heart gift box and certified IGI report.

Step 06

MOQ, Mixed Designs and the Real First Order

Every year we see the same omission in bridal Sets spec sheets, and every year it costs a buyer a season, and at USD 72-470 for 300 pieces that is the number the buyer signs.

At 300 pieces the arithmetic on bridal Sets changes: the fixed costs spread, the variable costs do not. That is why the second order prices better than the first even when the gold fix has moved up, with IGI report and heart gift box stated on the same sheet.

We quote both a first-run price and a reorder price for bridal Sets on the same sheet so the buyer can see where the curve flattens. Most flatten by the third run, certified IGI report and packed heart gift box at 300 pieces.

Step 07

Sample to Container: The Real Calendar

The number is less interesting than the rule behind it, and bridal Sets is where that rule gets tested, shipped as heart gift box and certified IGI report.

One practical note on timing for bridal Sets: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, which is how the Valentine Program account reads it at USD 72-470.

We date the bridal Sets proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, shipped as heart gift box and certified IGI report.

Step 08

Valentine Window for bridal Sets

The Valentine window is short and unforgiving: stock has to be in the warehouse by the last week of January or the season is gone. That puts the production order in the second week of December, ahead of the Lunar New Year slowdown, with IGI report and heart gift box stated on the same sheet.

Paired designs move better than single pieces here. A matching pair of bridal Sets, boxed together with two cards, converts at the same retail price as two singles and costs about nine percent more to make, and the Valentine Program quote for it sits at USD 72-470.

Photography has to be red-and-white neutral. A bridal Set shot on a red silk background reads as a gift in a listing thumbnail, and that is the only image most buyers will ever see, on a 300-piece Valentine Program order at USD 72-470.

Step 09

How a Repeat Order Gets Built

Nothing in this sequence is unusual, and that is the point. Each step exists because skipping it produced a specific failure on a previous order, which the Valentine Program file records at USD 72-470 in heart gift box.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

Reorders inside this sequence run 12-15 days because the model, the gauge set and the signed spec stay in our system, quoted at USD 72-470 per piece in heart gift box.

Step 10

What This Means for a First Order

A first Valentine Program order of 50 pieces per design at USD 72-470 tests the line rather than the range. Three designs covers the shelf.

Ask for the retained tray and the IGI report batch sheet with the first shipment. Both are free and both decide the reorder, and the Valentine Program quote for it sits at USD 72-470.

Step 11

Freight, Duty and the Arrival Check

Export runs through Guangzhou or Shenzhen. Air lands in 5-8 days on the US west coast, 7-10 on the east, and sea takes roughly three times the transit, certified IGI report and packed heart gift box at 300 pieces, quoted at USD 72-470 per piece in heart gift box.

FOB is the default on bridal Sets and DDP is the option. Buyers new to the US market usually take DDP once, then switch after they see the breakdown, the figure being USD 72-470 for a 300-piece run.

If metal lot mismatch appears in the arrival check, the retained tray decides who owns it. Keep the IGI report batch sheet in the same folder as the packing list, and 300 pieces leaves Wuzhou in heart gift box at USD 72-470.

Step 12

Frequently Asked Questions

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, on a 300-piece Valentine Program order at USD 72-470.

What is the minimum order for bridal Sets?

50 pieces per bridal Set. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which is USD 72-470 on the Valentine Program schedule.

Do you supply certificates for bridal Sets?

IGI report on bridal Sets above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of cross-piece color match, which is what a counter or a listing actually needs, which is how the Valentine Program account reads it at USD 72-470.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if metal lot mismatch shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, which is USD 72-470 on the Valentine Program schedule.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, on a 300-piece Valentine Program order at USD 72-470.

Step 13

Next Step

The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 133 7744 7107, subject Valentine Program, which is how the Valentine Program account reads it at USD 72-470.

HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 133 7744 7107, priced at USD 72-470 for the 300-piece Valentine Program run.

Related reading: Bridal Sets Made to Order: Sample to Container: The Real Calendar - HOLYCOME Necklaces & Pendants Trade Show Sample: The Reject Tray Policy That Decides a Partner - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .