Factory-direct bridal jewelry, shipped to the USA

Bridal Sets

Bridal Sets Made to Order: Sample to Container: The Real Calendar

9 November 2026 · 11 min

Step 01

Sample to Container: The Real Calendar

The brief was simple: 50 bridal Sets, matched metal and stone across two or three pieces, delivered before June. The run that arrived carried 17 pieces with metal lot mismatch, and the buyer spent USD 40-155 on sorting before the goods reached a shelf, priced at USD 81-525 for the 50-piece Made to Order run.

Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and metal lot mismatch is what a photograph fails to define, priced at USD 81-525 for the 50-piece Made to Order run.

Bridal Sets wholesale piece from the HOLYCOME line in Wuzhou

The fix cost about 28 seconds per bridal Set and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, and the Made to Order quote for it sits at USD 81-525.

Step 02

The Made-to-Order Path for bridal Sets

Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, quoted at USD 81-525 per piece in single-piece foam box.

Twenty days is realistic for a new bridal Set when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, which is how the Made to Order account reads it at USD 81-525.

The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, the figure being USD 81-525 for a 50-piece run.

Bridal Sets setting and finish detail on a HOLYCOME factory sample
Step 03

The Three Failures We See Most in Incoming Samples

stone count variance

A halo set quoting 42 stones that ships with 38 reads as a downgrade. Count per piece, not per order, and 50 pieces leaves Wuzhou in single-piece foam box at USD 81-525.

Our countermeasure is a gauge and a written limit. It adds about 28 seconds per piece and removes the defect from the run rather than from the carton, which is how the Made to Order account reads it at USD 81-525.

box fit

A set that does not sit flat in its box photographs badly and arrives with a shifted piece. Box tolerance is part of the product, and at USD 81-525 for 50 pieces that is the number the buyer signs.

In a 50-piece run this typically shows on 8 of pieces. Catching it means measuring cross-piece color match at the tray level, not inspecting the finished carton, which is USD 81-525 on the Made to Order schedule.

metal lot mismatch

A set assembled from two casting lots shows a tonal step between the ring and the pendant under daylight. One lot per set is the rule, certified IGI report and packed single-piece foam box at 50 pieces.

The commercial effect is piece replacement and a box reship, typically USD 18-30 per set. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is USD 81-525 on the Made to Order schedule.

Step 04

What US buyers Check Before They Sign

Four lines decide whether bridal Sets at USD 81-525 sells through or comes back, and none of them appears on a typical trading-company quote.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

Put these four into the purchase order and the Made to Order argument after delivery becomes arithmetic, priced at USD 81-525 for the 50-piece Made to Order run.

Step 05

Order Terms, Sample Timing and Packing

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, shipped as single-piece foam box and certified IGI report.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 81-525 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Made to Order file records at USD 81-525 in single-piece foam box.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of cross-piece color match for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and at USD 81-525 for 50 pieces that is the number the buyer signs.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, on a 50-piece Made to Order order at USD 81-525.

Step 06

Where USD 81-525 Per Piece Actually Goes

Cost per piece at USD 81-525 leaves little room for assumption. The table shows which line compresses and which one only moves quality.

Cost lineShareWhat moves it
Base metal or alloy for bridal Sets30%Alloy choice and casting yield
Stone or melee for bridal Sets20%Sieve range and lot batching
Setting and finishing labor for bridal Sets19%Jig design and bench minutes
Plating, polish and QC for bridal Sets12%Per-tray versus per-piece checks
Packaging for bridal Sets19%single-piece foam box

A factory with no bench minutes per piece has never costed bridal Sets at USD 81-525. Ask for minutes and for the reject rule.

Step 07

Carton Cube, Duty and the Freight Line That Surprises Buyers

Most quotes for bridal Sets describe the product and skip the part that decides whether the buyer makes money, priced at USD 81-525 for the 50-piece Made to Order run.

Three numbers decide it for bridal Sets: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, and at USD 81-525 for 50 pieces that is the number the buyer signs.

We send a one-page sheet with every bridal Sets quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, shipped as single-piece foam box and certified IGI report.

Step 08

Alloy, Karat and the Cost of a Color Change

This is the question that separates a trading company from a factory, and on bridal Sets the answer is usually shorter than buyers expect, the figure being USD 81-525 for a 50-piece run.

There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on bridal Sets and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, and 50 pieces leaves Wuzhou in single-piece foam box at USD 81-525.

We would rather lose a first order of bridal Sets on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, quoted at USD 81-525 per piece in single-piece foam box.

Step 09

What This Means for a First Order

A first Made to Order order of 50 pieces per design at USD 81-525 is a test of the line, not a commitment to the range.

Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, with IGI report and single-piece foam box stated on the same sheet, certified IGI report and packed single-piece foam box at 50 pieces.

Step 10

Freight, Duty and the Arrival Check

Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, shipped as single-piece foam box and certified IGI report, which is how the Made to Order account reads it at USD 81-525.

For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, and at USD 81-525 for 50 pieces that is the number the buyer signs.

Check the count, the weight and cross-piece color match and stone count per piece before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, which is USD 81-525 on the Made to Order schedule.

Step 11

How a Repeat Order Gets Built

The sequence below is fixed for a Made to Order run. The dates move with the stone lot, not with the shipping season, shipped as single-piece foam box and certified IGI report.

  1. Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
  2. Cut the model in wax or resin and photograph it on the gauge before metal is committed.
  3. Cast the first article, set the stones and finish it exactly as bulk will be finished.
  4. Send the first article for approval with the weight and the stone measurements stated.
  5. Run the balance of the order in 25-30 days, holding the approved article as the reference.
  6. Ship with the approved article photographed beside a production piece from the same tray.

Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Made to Order shipment, the figure being USD 81-525 for a 50-piece run.

Step 12

Frequently Asked Questions

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and the Made to Order quote for it sits at USD 81-525.

How long does a reorder of the same bridal Set take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which is USD 81-525 on the Made to Order schedule.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white bridal Sets, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and 50 pieces leaves Wuzhou in single-piece foam box at USD 81-525.

How is bridal Sets packed for single-piece foam box?

Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, quoted at USD 81-525 per piece in single-piece foam box.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and the Made to Order quote for it sits at USD 81-525.

Step 13

Next Step

The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 133 7744 7107 and mark it Made to Order, certified IGI report and packed single-piece foam box at 50 pieces.

HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 133 7744 7107, and 50 pieces leaves Wuzhou in single-piece foam box at USD 81-525.

Related reading: Bridal Sets Private Label Carton: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME Necklaces & Pendants Q4 Holiday Stock: What the Quote Actually Covers - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .