Factory-direct bridal jewelry, shipped to the USA

Bracelets & Bangles

Bracelets & Bangles Made to Order: Sample to Container: The Real Calendar

9 November 2026 · 11 min

Step 01

Why the Made to Order Quote Looks Cheap Until It Lands

In October, a US buyer of bracelets and Bangles ordered 50 bracelets and Bangles and asked for the same tennis lines as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, and 50 pieces leaves Wuzhou in single-piece foam box at USD 42-275.

In the Made to Order file the failure was already written down. Clasp torsion failure sat in the buyer's own incoming report from the previous season and nobody carried it forward, so the same line failed twice, and 50 pieces leaves Wuzhou in single-piece foam box at USD 42-275.

Bracelets & Bangles wholesale piece from the HOLYCOME line in Wuzhou

The second run shipped single-piece foam box with the spec stapled to the packing list. Zero rejects on arrival, and the buyer's own bench stopped re-inspecting, certified IGI report and packed single-piece foam box at 50 pieces.

Step 02

The Made-to-Order Path for bracelets and Bangles

Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, on a 50-piece Made to Order order at USD 42-275.

Twenty days is realistic for a new bracelets and Bangle when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, and 50 pieces leaves Wuzhou in single-piece foam box at USD 42-275.

The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, priced at USD 42-275 for the 50-piece Made to Order run.

Bracelets & Bangles setting and finish detail on a HOLYCOME factory sample
Step 03

What Fails First on bracelets and Bangles

link gap growth

Gaps between links grow when the connecting pin is 0.05 mm under size. A pin gauge on every tenth piece catches it cheaply, which is USD 42-275 on the Made to Order schedule.

The commercial effect is clasp replacement plus reship, typically USD 9-15 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is how the Made to Order account reads it at USD 42-275.

length drift on bangles

A bangle that measures 6.9 inch instead of 7.0 slides differently on the wrist. Oval versus round form changes the fit even at the same number, quoted at USD 42-275 per piece in single-piece foam box.

Our countermeasure is a gauge and a written limit. It adds about 20 seconds per piece and removes the defect from the run rather than from the carton, on a 50-piece Made to Order order at USD 42-275.

clasp torsion failure

A box clasp rated for a necklace fails under wrist rotation. The clasp has to be tested in torsion, not only in pull, and the Made to Order quote for it sits at USD 42-275.

In a 50-piece run this typically shows on 8 of pieces. Catching it means measuring clasp torsion resistance at the tray level, not inspecting the finished carton, which the Made to Order file records at USD 42-275 in single-piece foam box.

Step 04

The Measurements Behind a USD 42-275 Quote

Specification is the only part of a bracelets and Bangles quote that survives the season. These four measurements are what we write into the single-piece foam box paperwork, priced at USD 42-275 for the 50-piece Made to Order run.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

Every line above is measurable with a gauge and a scale. At USD 42-275 per piece, a supplier who cannot state them is selling a photo.

Step 05

MOQ, Samples and the Balance

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and the Made to Order quote for it sits at USD 42-275.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 42-275 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is USD 42-275 on the Made to Order schedule.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of clasp torsion resistance for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, on a 50-piece Made to Order order at USD 42-275.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which the Made to Order file records at USD 42-275 in single-piece foam box.

Step 06

What a USD 42-275 Quote Hides

The 50-piece Made to Order price splits as below. The line that decides season two is the plating and QC share, not the metal, shipped as single-piece foam box and certified IGI report.

Cost lineShareWhat moves it
Base metal or alloy for bracelets and Bangles34%Alloy choice and casting yield
Stone or melee for bracelets and Bangles25%Sieve range and lot batching
Setting and finishing labor for bracelets and Bangles22%Jig design and bench minutes
Plating, polish and QC for bracelets and Bangles15%Per-tray versus per-piece checks
Packaging for bracelets and Bangles4%single-piece foam box

Five lines, one price. If the supplier will not break them out, the number being compared is not a bracelets and Bangles price, on a 50-piece Made to Order order at USD 42-275.

Step 07

Carton Cube, Duty and the Freight Line That Surprises Buyers

The figure below is what we quote for bracelets and Bangles, and it is deliberately narrower than the market average, which is how the Made to Order account reads it at USD 42-275.

Three numbers decide it for bracelets and Bangles: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, quoted at USD 42-275 per piece in single-piece foam box.

We send a one-page sheet with every bracelets and Bangles quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, on a 50-piece Made to Order order at USD 42-275.

Step 08

Alloy, Karat and the Cost of a Color Change

Most bracelets and Bangles disputes we arbitrate trace back to this line, not to the defect itself, quoted at USD 42-275 per piece in single-piece foam box.

There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on bracelets and Bangles and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, which is how the Made to Order account reads it at USD 42-275.

We would rather lose a first order of bracelets and Bangles on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, the figure being USD 42-275 for a 50-piece run.

Step 09

A 50-Piece Test Run

The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, which the Made to Order file records at USD 42-275 in single-piece foam box.

Put the reject rule in writing before the deposit. The Made to Order conversation after arrival is shorter when the rule is on the order already, priced at USD 42-275 for the 50-piece Made to Order run.

Step 10

The Dock Check on bracelets and Bangles

We ship from Guangzhou or Shenzhen, and the port choice follows the carrier rate rather than a fixed habit, and the Made to Order quote for it sits at USD 42-275.

DDP suits a first Made to Order order because the duty invoice arrives after the carton clears, and that is the line buyers forget to budget, and at USD 42-275 for 50 pieces that is the number the buyer signs.

The arrival check is three steps and none needs a lab: count against the packing list, weigh a sample, measure ten pieces, which is how the Made to Order account reads it at USD 42-275.

Step 11

From Spec to single-piece foam box

Our process is deliberately boring, because boring is what survives a bulk run with several sets of hands on it, with IGI report and single-piece foam box stated on the same sheet, and the Made to Order quote for it sits at USD 42-275.

  1. Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
  2. Cut the model in wax or resin and photograph it on the gauge before metal is committed.
  3. Cast the first article, set the stones and finish it exactly as bulk will be finished.
  4. Send the first article for approval with the weight and the stone measurements stated.
  5. Run the balance of the order in 25-30 days, holding the approved article as the reference.
  6. Ship with the approved article photographed beside a production piece from the same tray.

A first order at 50 pieces per design is a measurement rather than a purchase. It tells you what clasp torsion resistance and overall length within +/-3 mm looks like from this line, priced at USD 42-275 for the 50-piece Made to Order run.

Step 12

Frequently Asked Questions

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, the figure being USD 42-275 for a 50-piece run.

How long does a reorder of the same bracelets and Bangle take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which is how the Made to Order account reads it at USD 42-275.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white bracelets and Bangles, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, on a 50-piece Made to Order order at USD 42-275.

How is bracelets and Bangles packed for single-piece foam box?

Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, on a 50-piece Made to Order order at USD 42-275.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, the figure being USD 42-275 for a 50-piece run.

Step 13

Next Step

Send a photo or a drawing of the piece you want in single-piece foam box, and the reply carries a price, a calendar and the four measurements, which the Made to Order file records at USD 42-275 in single-piece foam box.

The factory behind bracelets and Bangles here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 133 7744 7107 on WhatsApp, and 50 pieces leaves Wuzhou in single-piece foam box at USD 42-275.

Related reading: Bracelets & Bangles Private Label Carton: AQL, Tray Checks and What a QC Report Shoul - HOLYCOME Loose Stones Q4 Holiday Stock: What the Quote Actually Covers - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .