Bracelets & Bangles
Bracelets Bangles Wholesale: First-Order Landed Cost Math
Every week a buyer sends me a target price for bracelets and bangles and asks if we can hit it. Nine times out of ten the number is built on the unit price alone, with freight, duty and certificate costs bolted on later as a surprise. That is how first orders go sideways. So let me show you the arithmetic the way we actually run it on the floor, with real line items and no rounding tricks.
Why the unit price is the smallest part of the decision
On a 925 silver bangle with moissanite accents, the ex-works unit price might sit at a certain number. By the time that piece reaches a warehouse in New Jersey or Rotterdam, the landed cost is usually 35 to 55 percent higher. That gap is not margin for us. It is freight, insurance, duty, certificates, and the cost of the money tied up in the deposit.
Buyers who only compare unit prices end up comparing two different things. One supplier quotes ex-works, another quotes DDP, a third quietly excludes the stone certificate. Before you negotiate a single cent, get every quote on the same Incoterm. We quote DDP by default so the number you see is the number you pay at your door.
The five cost lines on a first bracelets and bangles order
Here is the structure we use internally when we build a quote. It has not changed in years because it works.
- Unit cost: metal weight times silver rate, plus stone grade and count, plus labor and plating.
- Certificates: GRA card per stone set, IGI report for the higher-value diamond pieces.
- Freight and insurance: DDP air, typically 5 to 8 days door to door.
- Duty and tax: destination-country rate, declared on the commercial invoice.
- Payment cost: T/T wire fees, or the small PayPal surcharge on sample orders.
Notice what is missing: tooling and sample fees. On stock items there is no mold charge. On custom designs there is a one-time mold cost, and we tell you the exact figure before you commit rather than burying it in the unit price.
A worked example: 200 mixed bangles, stock designs
Say you order 200 pieces across four stock bangle styles in 925 silver with 2mm moissanite accents. Average silver weight is 4.2 grams. Average unit price lands around USD 9.60 ex-works. That is USD 1,920 in goods.
Certificate cards add roughly USD 0.35 per piece for the GRA documentation, so USD 70. DDP air freight on about 6 kg gross runs USD 180 to USD 230 depending on the week and the airport. Duty into the US on silver jewelry is modest but real; into the EU it is higher and you should budget for it properly. Payment fees on a T/T are usually a flat USD 25 to USD 40.
| Cost line | Basis | Amount (USD) | Per piece (USD) |
|---|---|---|---|
| Goods, 200 pieces | Ex-works unit price | 1,920.00 | 9.60 |
| GRA certificate cards | Per piece | 70.00 | 0.35 |
| DDP air freight | 6 kg gross | 205.00 | 1.03 |
| Duty and import tax | Destination rate | 168.00 | 0.84 |
| Payment fees | Flat T/T | 35.00 | 0.18 |
| Total landed | 2,398.00 | 11.99 |
So a USD 9.60 piece lands at USD 11.99. That is a 25 percent uplift, and that is the number you should build your retail math on. If a competitor quotes you USD 9.00 ex-works with freight billed separately, you are not comparing apples.
Where custom work changes the math
Custom bangles start at 30 pieces per design. Below that, the mold amortization per piece becomes ugly and we will tell you so rather than pad the quote. Above 30 pieces the mold cost spreads thin quickly, and at 300 pieces it is often negligible.
Custom also means a sample stage. Samples run through PayPal because it is fast and both sides have a record. Production after approval runs on T/T with 30 percent deposit and the balance against the pre-shipment inspection report. Production is 12 to 18 days from deposit and approved sample, not from the day you first emailed.
The buyers who get burned on a first order are almost never the ones who negotiated hardest. They are the ones who never wrote down what the landed cost actually was.
How our numbers run about 20 percent better than a trading company
We are the factory, not a middleman with a showroom. Stones come off our own cutting line, silver goes through our own casting and finishing, and QC happens in the same building. That removes one full margin layer and, more importantly, removes the two to four days a trader spends relaying every question back and forth.
The practical result: on comparable specs, our cost, speed and yield run roughly 20 percent better than a typical trading company. Not because we cut corners, but because there is no one in the middle taking a slice and no one guessing at the answer when you ask about a stone grade.
The three QC stages that protect your landed cost
Cheap pieces are expensive when they arrive wrong. Our inspection runs in three stages, and each one exists to stop a specific failure.
- Incoming stone check: every batch of moissanite and lab-grown diamond is checked for color, cut and measurement before it touches a setting.
- In-process check: settings, solder joints and clasp tension are checked at the bench, not after polishing.
- Pre-ship AQL: a sampling inspection to AQL standards on the finished lot, with photos and a report you keep on file.
If a lot fails the AQL stage, it gets reworked before it ships. That costs us a few days. It saves you a return shipment across an ocean, which is the single most expensive thing that can happen on a first order.
What to put in your first purchase order
Write down the Incoterm, the total landed estimate, the certificate type per SKU, the AQL level, and the deposit terms. Five lines. If a supplier will not put those five lines on paper, that tells you something.
For a first order we usually recommend staying under 300 pieces and mixing stock designs with one or two custom pieces to test the workflow. That keeps the mold spend small and gives you a real read on our QC and packing before you commit to a season.
Frequently Asked Questions
What is the minimum order for bracelets and bangles wholesale?
Stock designs start at 1 piece, so you can sample freely. Custom designs start at 30 pieces per style because of mold amortization. Price is quoted per piece ex-works or DDP, depending on what you ask for.
How long does a first order take?
Production is 12 to 18 days from deposit and approved sample. DDP delivery adds 5 to 8 days door to door. Samples are usually faster, but the exact window depends on whether the stone grade you want is in stock.
How is the price calculated?
Silver weight times the current silver rate, plus stone grade and count, plus labor and plating. Certificate costs are quoted separately so you can see them. Duty and freight are shown as their own line so your landed cost is transparent.
Send me your target design, quantity and destination country, and I will build the full landed cost sheet for you, line by line, with no hidden freight. If you want to see the metal and stone quality first, ask for a sample pack and we will quote it on PayPal. Reach the floor team at service@holycome.com or WhatsApp +86 133 7744 7107.
Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.
Ask the workshop


