Factory-direct bridal jewelry, shipped to the USA

Bracelets & Bangles

Bracelets & Bangles Wholesale Cost Breakdown: Inside the USD 34-220 Piece

10 November 2026 · 8 min

Step 01

Direct Answer: What the Quote Covers

Direct Answer: at 50 to 200 pieces a bracelets and bangle from Wuzhou lands in the USD 34-220 band per piece, and that band splits roughly into metal, stone, bench labor, finishing and packing. The two lines that move the number most are the stone grade and the bench minutes; the line buyers challenge first is labor, and it is the line that decides whether the piece survives a season.

Step 02

The Five Cost Lines

The table is the split we work to on a 500-piece run at USD 34-220. Shares move a few points with the design, never by twenty, and a quote that claims otherwise has changed a line without saying which, the same figure we quote on bracelets and bangles at USD 34-220.

Bracelets & Bangles wholesale piece from the HOLYCOME line in Wuzhou
Cost lineShare of pieceWhat moves itWho controls it
Metal for the bracelets and bangle30%Alloy choice, shank thickness and casting yieldFactory
Stone and melee in bracelets and bangles23%Sieve range, grade band and lot batchingMarket plus grade
Bench labor per piece22%Setting type, prong count and jig designFactory
Finishing and plating12%Plating micron, polish passes and pre-plate inspectionFactory
Packing and the poly bag and printed sleeve13%Pouch, box, print run and carton countBuyer choice

Nothing in that table is a trade secret, and that is the point. A buyer who knows the split can ask a specific question: which line changed, by how much, and what does the bracelets and bangle lose if we take it back.

Step 03

Line by Line

Where the metal line sits

Metal is the least negotiable line in a bracelets and bangles quote, because it is bought by weight and priced by weight. What a factory controls is thickness and yield: a shank 0.2 mm thinner saves a few percent of metal and costs a resizing later, and a casting yield two points better saves more than any discount conversation. Ask for the gram weight per piece at the quoted size, not for a percentage off.

Where the stone line sits

The stone line is where two quotes for the same drawing diverge by double digits, and almost never because one factory is cheaper. It diverges because one is quoting a grade band and the other is quoting a grade. Ask for the band in writing: color range, clarity range, mm tolerance. A bracelets and bangle at USD 34-220 with a wide band and one at the same price with a narrow band are not the same product.

Where the labor line sits

Bench minutes decide the labor share, and the setting type decides the minutes. A prong setting and a bezel on the same bracelets and bangle can differ by several minutes per piece, which at 500 pieces is the difference between one quote and another. Ask for minutes per piece and for the jig that holds the repeat, because a jig is what makes a reorder cost less than the first run.

Bracelets & Bangles setting and finish detail on a HOLYCOME factory sample

Where the finishing line sits

Finishing is the cheapest line to specify and the most expensive to skip. Rhodium at 0.20 micron with a palladium strike reads white through a season; nominal plating reads white at the counter and yellow at the third month. Pre-plate inspection of casting porosity belongs here too, because plating a porous surface is a six-week delay on a complaint rather than a fix, the detail a 500-piece run of bracelets and bangles is judged on.

Where the packing and freight line sits

Packing is a buyer choice, so it should be quoted separately from the piece. The poly bag and printed sleeve carries a print run, a carton count and a packing list, and all three are priced per order rather than per piece. Freight is the one line that is not a cost of the bracelets and bangle at all, which is why landed cost belongs on a second sheet.

Step 04

The Ladder: 50, 200 and 500 Pieces

Quantity bandUnit priceWhat changes
50 to 200 piecesUSD 34-220Setup amortised over a small run; gauge and sample already paid
200 to 500 piecesUSD 31-202Jig and fixture amortised; stone bought in a matched lot
500 pieces and aboveUSD 28-187Dedicated stone procurement and a reserved production slot

The ladder is arithmetic, not a volume trick. The setup, the gauge and the sample are fixed costs; the metal and stone are not. Splitting them explains why the third band moves less than the second, the detail a 500-piece run of bracelets and bangles is judged on.

A buyer comparing a 50-piece quote with a 500-piece quote is comparing two different products. Compare bands, then decide which band your first two orders actually sit in, because that is the number your margin has to survive, a detail that decides the reorder on bracelets and bangles at USD 34-220.

We quote the band before the design is finalised so the buyer can size the first order to the band rather than discover the mismatch after sampling, the same figure we quote on bracelets and bangles at USD 34-220.

Step 05

What the Quote Does Not Include

  • Return freight on a rejected tray, which is charged by the courier and not by the factory, and is the line buyers forget when they compare two quotes.
  • Re-plating or re-polish after a season, when nominal plating wears through on a fast-moving SKU and the piece comes back through the counter rather than the factory.
  • Reship on a sizing drift, because a run that drifts 0.3 mm across sizes produces a second shipment for the same order.
  • The certificate you did not ask for at the quote stage, priced at the moment a marketplace or a customs broker asks for it, which is always the expensive moment.
  • The air freight to protect a launch date, charged at four to six times the ocean rate, and usually caused by a sample approved two weeks later than the calendar allowed.

Four of the five are avoidable at the order stage and one is avoidable at the spec stage. None of them are avoidable at the claim stage, which is when buyers usually discover them, a detail that decides the reorder on bracelets and bangles at USD 34-220.

Step 06

The Margin Arithmetic

LineAmount per pieceNote
Factory price per pieceUSD 34-220Ex-works, packing included, certificate per the quote
Freight and duty allocationUSD 4-26Ocean at 500 pieces; DDP quoted separately
Landed costUSD 38-246The number your retail multiple has to clear
Retail at 3.0xUSD 114-738Typical for a boutique with a 55 to 60 percent margin

A three-times multiple on landed cost is the working assumption for a US boutique; below 2.6 the bracelets and bangle has to carry the marketing itself. That is why the factory band matters more than the discount.

The multiple is not a pricing opinion, it is a cash constraint. Pieces that sit for two seasons need a higher multiple to pay for the floor space, and pieces that reorder need a lower one, which on a 500-piece run of bracelets and bangles is the number the order carries.

Run the arithmetic on the band you will actually order, not on the 500-piece band you hope to reach. The first two orders are what the cash flow has to survive, the detail a 500-piece run of bracelets and bangles is judged on.

Step 07

Frequently Asked Questions

What is included in the USD 34-220 band for bracelets and bangles?

Piece, packing per the poly bag and printed sleeve, and GRA on the lots above the threshold. Freight, duty, certificate upgrades and private-label print runs are quoted separately so the band stays comparable, a detail that decides the reorder on bracelets and bangles at USD 34-220.

Why do two suppliers quote the same design so differently?

Almost always the stone grade band or the bench minutes. Ask for the band in writing and for minutes per piece; a difference under ten percent is specification, above twenty is a different product, the same figure we quote on bracelets and bangles at USD 34-220.

Can the metal line be reduced without losing quality?

Yes, by 0.2 mm of shank thickness or by a lighter hollow section, at the cost of resize work later. We quote both and state the trade rather than choosing it for the buyer, which on a 500-piece run of bracelets and bangles is the number the order carries.

How much does plating thickness change the price?

Vermeil at 3 microns costs more than rhodium at 0.20 micron, and both cost less than the re-plating a nominal finish triggers. The delta is per lot, not per piece, so small runs see it as a setup line, the detail a 500-piece run of bracelets and bangles is judged on.

Do you quote landed cost?

Yes, as a separate line with the duty assumption stated. DDP is available for US accounts and removes the invoice that otherwise arrives after the carton clears, a detail that decides the reorder on bracelets and bangles at USD 34-220.

Step 08

Next Step

Send the specification and the quantity band, and the reply breaks the price into the five cost lines with the share of each, so the number can be argued line by line instead of as a whole, the same figure we quote on bracelets and bangles at USD 34-220.

Wuzhou HengliLai Jewelry Co., Ltd. has made bracelets and bangles under the HOLYCOME label since 2009, at a plant in Wuzhou, Guangxi, running roughly 60,000 pieces monthly. Because casting and setting sit in the same building, a gauge change on the bench reaches the next tray the same week rather than the next shipment. Quotes, drawings and inspection sheets go out from service@holycome.com, or WhatsApp +86 133 7744 7107.

Related reading: Bracelets & Bangles Wholesale: Ready Stock, Made-to-Order or Private Label First - HOLYCOME Loose Stones Bridal Boutique: The Sample Approval That Survives Production - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .