Factory-direct bridal jewelry, shipped to the USA

Bridal Sets

Bridal Sets Private Label: Exclusivity, Dieline and the Reorder for Wholesale Distributors

9 November 2026 · 8 min

Bridal Sets Private Label: Exclusivity, Dieline and the Reorder for Wholesale Distributors

A brand in Los Angeles sent a mood board and asked for a price and got six quotes that differed by 300% because nobody had specified stone size, setting type or plating thickness. The order was not lost on price. It was lost on a specification nobody wrote down. This piece looks at bridal sets from the buyer's side of the table: what the promise means at the bench, what it costs to get it wrong, and how to write a brief a factory can be held to.

Step 01

What an OEM Brief Has to Contain Before a Factory Can Quote It

A custom programme fails at the brief, not at the bench. If the brief does not state the metal, the stone grade, the setting type, the finish thickness and the tolerance, the factory will fill the gaps with whatever is cheapest that day.

We quote only from a brief that has those five fields filled, and we send back a drawing with the tolerances written on it before anyone touches wax.

Step 02

What the Industry Standard Delivers, and Where It Breaks

The default offer in this category is a stock photo, a unit price and a thirty-day promise. That works for one order and stops working on the second, because a stock photo cannot specify necklace.

ComparisonCommon practiceWhat we holdWhy it matters
Brief fieldVague versionWhat we require
Metalsilver925 with rhodium 0.05-0.10 micron
Stonemoissanite 6.5mmVVS, D-F, calibrated 6.5 +/-0.1mm
Settingprong4-prong basket, 1.2mm prong wire
Tolerancenone stated+/-0.15mm on diameter, +/-0.02g on weight
Step 03

How We Run a Custom Programme From Sketch to Repeat Order

Hue and tone match across the three pieces is the number we publish per lot. It is the one a buyer can check with a caliper and a loupe in ten minutes, and the one that decides whether a reorder is a formality or a negotiation.

  • Lot and rack reference on every carton
  • Necklace declared on the invoice, not assumed
  • One plated sample approved per rack before the run
  • Stone parcel photographed and hue band stated in writing
Step 04

Why We Publish the Numbers

Publishing hue and tone match across the three pieces and the plating micron figure is uncomfortable for a factory that expects to be judged on photographs. It is comfortable for a buyer who has to defend a reorder to a boss.

The number is the argument. A supplier who will not publish one is asking you to trust the photograph instead.

Step 05

The Three Failure Modes We See Most

On sets the three failures that come back most often are stone hue drift between the necklace and the earrings, metal tone mismatch after separate plating lots, and box packaging that does not fit the set. Each has a root cause upstream of the bench, which is why sorting finished pieces never fixes the rate.

Prong wear traces to wire gauge and setting pressure. Stone tilt traces to the bearing surface being cut by hand instead of by burr. Plating burn-off traces to rack contact points, not to the tank.

Step 06

Tolerance Stack: Where 0.1mm Becomes a Complaint

Tolerance compounds across operations. A casting that runs 0.15mm wide, a setting that shifts the stone 0.1mm, and a polish that removes 0.05mm of surface can put a matching set outside the size the customer ordered without any single step being out of specification.

That is why we hold the stack at the casting rather than at the finish. Tightening the last operation cannot recover tolerance that was already spent at the first.

Step 07

The Reorder Sheet We Hand Back

Every reorder comes back with the original sheet: alloy batch, stone parcel reference, plating rack number, setting team, measured hue and tone match across the three pieces. It is four lines and it removes the argument about what "the same" means.

Buyers who keep those four lines can audit a fifth lot in an afternoon. Buyers who do not are comparing two photographs and hoping.

Step 08

Packaging and the First Thirty Seconds

The carton is the first physical impression. An anti-tarnish pouch, a cavity insert and a stone-side-up orientation cost a few cents and prevent most of the transit damage we see on sets.

Loose fill is the main cause of bent posts and scratched faces. It is cheaper than a cavity insert by about two cents a unit, which is the worst trade in the category.

Step 09

Why We Publish the Numbers

Publishing hue and tone match across the three pieces and the plating micron figure is uncomfortable for a factory that expects to be judged on photographs. It is comfortable for a buyer who has to defend a reorder to a boss.

The number is the argument. A supplier who will not publish one is asking you to trust the photograph instead.

Step 10

Why the Cheapest Sample Is the Most Expensive Decision

A sample that costs nothing is usually made from a stock tree with a stone the factory already had. It shows you the catalog, not the production.

We charge samples at cost and credit them against the first order. It is a small amount of money that buys you a truthful answer about what your reorder will look like.

Step 11

The Six Cost Lines and Which One Moves

Metal, stone, labor, plating, packaging and freight. On a fifty-piece run the first two carry roughly half the cost, labor about a quarter, and the rest the balance. A quote that undercuts the market by thirty per cent has moved one of the last four.

Plating and packaging are the cheapest to cut and the hardest for a buyer to see, which is exactly why they get cut. We publish the micron figure so the cut is visible before the order rather than after the first complaint.

Step 12

What to Send Us to Get a Real Quote

A sketch or reference photo, the metal and finish, the stone size and grade, the setting type, the target quantity and the tolerance you will accept. With those six fields we return a drawing and a price in three days.

Without them we can only quote a range, and a range is what turns into a dispute at delivery. We would rather send the drawing back with the tolerances printed on it than send a number that will not hold.

Step 13

Why the Cheapest Sample Is the Most Expensive Decision

A sample that costs nothing is usually made from a stock tree with a stone the factory already had. It shows you the catalog, not the production.

We charge samples at cost and credit them against the first order. It is a small amount of money that buys you a truthful answer about what your reorder will look like.

Step 14

What It Costs and How Long It Takes

Fifty pieces per design is the working minimum on bridal sets. A sample runs three to five days, bulk fifteen to twenty days under 500 pieces, and a custom mold twenty-five to thirty days from drawing approval. Payment is 30% deposit with the balance against the bill of lading copy.

If the order is below fifty, the setup cost per piece roughly doubles because the casting tree and the plating rack are fixed costs. That is arithmetic, not a policy to negotiate around.

ItemValueNote
MOQ50 pcs / designsizes and colors can be split
Sample3-5 daysone piece, approved before the run
Bulk lead time15-20 daysunder 500 pieces
Custom lead time25-30 daysfrom drawing approval
Payment30% / 70%balance against B/L copy
PortGuangzhou / Shenzhenexport from Wuzhou
Step 15

Frequently Asked Questions

What do you need to quote a custom matching set?

A sketch or reference photo, the metal and finish, the stone size and grade, the setting type, the target quantity and the tolerance you will accept. With those we return a drawing and a price in three days.

Do you charge for CAD?

No for the first revision on a programme of fifty pieces or more. A second structural revision carries a small drawing fee, which is credited against the first production order.

Who owns the mold?

You do, once the tooling is paid. We keep it at the factory for your reorders and will ship it to another supplier on written request.

Can you match an existing piece?

Usually, if you send the physical sample rather than a photo. We measure the stone, the shank width and the plating thickness and quote to those numbers.

Can you produce a second lot identical to the first?

Yes, if we hold the four inputs: alloy batch, stone parcel, plating tank and setting team. The reorder sheet records all four, so the check happens against a document rather than against a memory.

What happens if the lot arrives outside the agreed tolerance?

Photograph the piece with a scale and reference the lot line. Above the agreed AQL we replace and cover freight; inside it we replace the affected units inside ten days.

Step 16

About the Manufacturer

HOLYCOME by Wuzhou HengliLai Jewelry Co., Ltd. runs casting, setting, polishing and plating on one site in Wuzhou, Guangxi, the artificial gemstone cluster that supplies most of the trade. Monthly capacity is roughly 60,000 pieces across silver and gold lines. Buyers can reach the trade desk at service@holycome.com or on WhatsApp at +86 133 7744 7107, and a factory visit can be arranged with two weeks' notice.

Step 17

Next Step

If you are pricing bridal sets for a season, send the quantity per design, the stone grade you need and the date you need it on the shelf. We will return a drawing, a landed cost and a production date within three days, and a physical sample before you commit to a run. Samples are charged at cost and credited against the first order.

Related reading: Wholesale Igi Lab Diamond Loose - HOLYCOME, Lab Diamond Bulk Price B2B Sourcing Guide - HOLYCOME, Lab Grown Diamond Wholesale Supplier Guide - HOLYCOME

Put this into a quotation

Send your spec sheet — stone, cut, size, plating and quantity — and we will return a costed timeline.

Ask the workshop

← Back to all articles

Related Jewelry Guides

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .